AOM - ASTURO K1 Mix, Air Assist-Airless spray gun with cap, 100 mesh filter & tip (specify tip size with order) Standard tip set-up M1150 (.011, 50°). An Air-Assisted Airless Gun for production painting which produces great film build with almost no overspray, uses a pin-type tip. Applies coatings twice as fast as HVLP and conventional spray guns. Available in many size tips with over 70% transfer efficiency. Produces a Class A finish and very popular for wood finishing. Used with a paint pump with a minimum of 10:1 ratio. Maximum spray pressure of 1800 psi. If you need a tip other than the 3 popular sizes shown, please refer to this chart on pin-type tips. Our most popular tip for wood finishes is .011 or .013 in 40 & 60 degree spray angles. K1 Mix Gun with Standard Tip .011, 50°. Part# 25507-M1150.
	Our Price $558.87	Quantity
K1 Mix Gun with Tip .013, 40°. Part# 25507-M1340.
	Our Price $558.87	Quantity
K1 Mix Gun with Tip .013, 60°. Part# 25507-M1360.
	Our Price $558.87	Quantity

Repair Kit for Asturo K1 (red) 25589R
Our Price $30.00	Quantity

Repair Kit for Asturo K1 (silver)25591R
Our Price $30.00	Quantity

Replacement Asturo Air-Assisted Airless Tips Chart for Model K1 Mix

AOM - ASTURO ASP2001-MIX Automatic air assisted-airless gun. Orifice sizes of .007 at 4 oz. per minute to .021 at 27 oz per minute. Includes air cap and choice of pin type tip. Automatic AAA (air-assist-airless) spray gun with aluminum base. Uses same aircap and tips as Asturo K1 Mix hand gun. To spray low to high solids automotive, wood, and industrial coatings. Stainless wet parts, and ideal for robotics applications. All connections are made on the base for rapid gun change. Standard tip .011 x 50°. Specify tip size with order.
	Our Price $715.46	Quantity