C.A. Technologies
HVLP Spray Guns
Conventional Paint Spray Guns

With 10-Day trial Period!

We would like to prefix the C.A.Technologies paint spray guns by emphasizing the quality and excellent atomization of these HVLP spray guns. The 100 series conventional or HVLP spray guns provide a good industrial finish. The SLP series (HVLP) spray guns provide a finely atomized pattern for that smooth finish needed for automotive paint. The SLP (HVLP) atomizes pigmented industrial coatings as fine as any premium conventional spray gun.

We are confident that you will be satisfied with the spray pattern from your JAGUAR or LYNX paint spray gun. If within 10 days you are not satisfied you can return for a full credit, less any shipping charges.

The Lynx spray guns have a built-in air micrometer in the gun handle. Both the Jaguar and Lynx spray guns have stainless steel wet parts.

2 Qt. Cup, Pressure Pot & Hose Set-ups Are Available at Special Package Prices.

Metric Conversion Chart
.021 .028 .036 .043 .051 .061 .072 .084 .110
  0.5mm     0.7mm     0.9mm     1.1mm     1.3mm     1.5mm     1.8mm     2.0mm     3.0mm  




C.A.T. Touch-Up Gun Package, Model Tjr, This assortment package is set-up for low viscosity coatings and stains, and requires 4 cfm of air. The set-ups included are: 1.0mm, 1.2mm, and 1.4mm. Plus .150 liter aluminum and nylon cup.
Our Price
$218.25
Quantity
C.A.T. Touch-Up Gun Package, Model Tjr-PPS same as above except with 180 ml (6 oz.) PPS cup and three liners and lids.
Our Price
$247.25
Quantity



C.A. Technologies Touch-Up Gun Package, Model Tjr-Deluxe, same features and benefits as the Tjr above for stains and top coats plus a Round Pattern Air-Cap for Shading which is used with a .5mm needle and nozzle. The other set-ups in this carry case 1.0mm and 1.2mm are used for air spray touch-up.
Our Price
$232.75
Quantity
C.A. Technologies Touch-Up Gun Package, Model Tjr-Deluxe-PPS same as above except with 180 ml (6 oz.) PPS cup and three liners and lids.
Our Price
$260.00
Quantity



60-TJR-10 Soft Seal Repair Kit
Our Price
$17.00
Quantity



C.A. Technologies Glazing and Touch-up Package, Model Tjr-Glaze. Enables you to lay down a glaze strip right in the groove without any atomizing air. Also includes a 0.5mm round pattern air-cap for shading, and 1.2mm fan pattern set-up for touch-ups.

Our Price
$271.00
Quantity
C.A.Technologies Glazing and Touch-up Package, Model Tjr-Glaze with PPS Enables you to lay down a glaze strip right in the groove without any atomizing air. ALso includes a 0.5mm round pattern air cap for shading, and 1.2 mm fan pattern set-up for touch-ups.
Our Price
$320.00
Quantity
60-TJR-10 Soft Seal Repair Kit
Our Price
$17.00
Quantity



400 ML Aluminum Cup for Tjr For jobs requiring more capacity than standard Tjr 150 ml (5 oz.) cup. 400 ml equals 13 oz. P/N 51-408
Our Price
$28.15
Quantity



C.A. Technologies HVLP Pressure Feed, Non-Bleeder,Turbine Gun Standard orifice size is 1.3mm, other sizes are available from .5mm to 1.5mm. Includes 1 quart pressure cup with check valve and wrench. Works on standard 5/8" & 3/4" ID hose and quick disconnect body. You will notice the quality components in this non-bleeder gun.
Our Price
$158.00
Quantity



Universal C.A.T. Gun Wrench, for Techline, Tomcat, Jaguar, Lynx, SLP, CPR, Cougar, and Bobcat Guns.
Our Price
$9.95
Quantity



C.A. Technologies CPR Gravity Gun. - The CPR stands for C.A.T. Reduced Pressure, or Compliant Air Spray, also referred to as High Transfer Efficiency (HTE). What all this means is almost the same 65% transfer efficiency as HVLP, but with the speed and finish of conventional air spray. These CPR guns are designed with the ability to switch between Reduced Pressure and HVLP by just exchanging the air cap. Currently the CRP guns are just being sold as CPR Packs with 2 additional orifice sizes. Go to CPR Packs for variations in the 100% stainless steel fluid passage gun. Reduced pressure 11 CFM at 29 psi, and 13.5 CFM at 29 psi for HVLP.
CPR Gun
Click Here for
CAT Pack Prices





C.A. Technologies H2O CPR Gravity Gun. - Same features and benefits as the standard CPR gun shown above. The H2O designation assures you this gun is 100% compatible with waterbase coatings, and the atomizing design was based on just waterbase coatings.
H2O CPR Gun
Click Here for
CAT Pack Prices






Reduced Pressure
Air Cap 11 cfm
           
CPR-T3 Techline

           
HVLP Air Cap
13.5 cfm
C.A. Technologies CPR-T3 Techline Gravity Spray Gun CAT Pack The above Techline gun is modified to provide "reduced pressure" conventional air supply as well as "HVLP" by just changing the air cap. This package includes 1.3mm, 1.5mm, and 1.7mm setups. Requires 11 and 13.5 cfm.

Click Here for
CAT Pack Prices


$247.50
Quantity



C.A.T. Techline-1.3mm Gravity HVLP Spray Gun, need a mid price gravity gun for clear class A finish. Assembled in the U.S. with quality stainless components, forged aluminum body, 13 cfm at 45 psi, and air control. For both the hobbiest and professional. Standard set-up 1.3mm for automotive basecoats.

BLOWOUT Price
$193.00
Quantity



C.A.T. Techline-1.5mm Gravity HVLP Spray Gun, Same as above with Standard Set-up 1.5mm for automotive clears, laquers, varnish and waterbase wood clears. Price
$193.00
Quantity



C.A. Technologies CPR-T3 Techline Gravity Spray Gun CAT Pack

Reduced Pressure
Air Cap 11 cfm
           
CPR-T3 Techline

           
HVLP Air Cap
13.5 cfm
Package No. Description Our Price Qty  
CPR-T3 Entry level spray gun package for industrial and general purpose finishing. Provides reduced pressure and HVLP spray technology and includes 1.3mm, 1.5mm, and 1.7mm setps. $247.50


C.A.T. Techline-1.7mm Gravity HVLP Spray Gun, same as above with standard set-up 1.7mm for wood waterbase clears, lacquers, varnish and enamels. Price
$193.00
Quantity



C.A.T. Techline-2.2mm Gravity HVLP Spray Gun, same as above with standard set-up 2.2mm for industrial high solids and automotive epoxies, primers and fillers. Price
$193.00
Quantity



10-111 Tool Kit for Techline gun. Price
$18.95
Quantity



C.A.T. JAGUAR J100C Conventional gravity feed paint spray gun 40-70 psi with 750cc aluminum cup. Standard set-up 1.3 mm. Set-up range 0.6 to 2.8mm. To professionally apply automotive paint and industrial primers and sealers.

Our Price
$310.25
Quantity



C.A.T. JAGUAR J100C Same as above with. 1.8 mm Set-up.
Our Price
$310.25
Quantity



C.A.T. Gel-Coat Spray Gun, using the Jaguar J100C Conventional Gravity Feed Paint Spray Gun. 50-80 psi with 750cc aluminum cup. Standard set-up 2.8mm, to quickly atomize gel-coats, adhesives, and polyesters.
Our Price
$310.25
Quantity



C.A.T. JAGUAR J300C Conventional gravity feed paint spray gun 40-70 psi with 750cc aluminum cup. Standard set-up 1.3 mm, set-up range 1.3mm to 1.6mm. To professionally apply all automobile paints and primers resulting in a class A finish.

Our Price
$329.75
Quantity
J300C Gun
Click Here for
CAT Pack Prices


C.A.T. JAGUAR J100H HVLP gravity feed paint spray gun 18-60 psi with 750cc pint aluminum cup. Standard set-up 1.5 mm. Set-up range 0.5 to 1.7mm. To professionally apply most automobile paints and wood clears resulting in a class A finish. 10 cfm at 35 psi. Optional 8 cfm air cap for wood clears.

Our Price
$339.25
Quantity
J100H Gun
Click Here for
CAT Pack Prices


C.A.T. JAGUAR JSLP-1.3mm HVLP Gravity Spray Gun To professionally apply automotive and industrial paints resulting in a Class A finish. Featuring 12 point balanced plenum (see above). Only 29 psi. inlet pressure at 13.5 cfm, standard set-up 1.3mm, set-up range 1.0 to 2.2mm, 750cc aluminum cup, stainless steel wet parts, 2 piece nozzle, optional 1000cc aluminum cup up-grade is available for an additional $10.00.

Our Price
$412.00
Quantity
C.A.T. JAGUAR JSLP-1.5mm HVLP Gravity Spray Gun Same as above with standard 1.5mm set-up, for high solid automotive clears and waterbase wood coatings.
Our Price
$412.00
Quantity
C.A.T. JAGUAR JSLP-1.7mm HVLP Gravity Spray Gun Same as above with standard 1.7mm set-up, for fillers and high solid pigmented industrial coatings and waterbase wood clears.
Our Price
$412.00
Quantity



10-105 Jaguar & JSLP Spray Gun Repair Kit Major repair kit.
Our Price
$29.10
Quantity
JSLP Gun
Click Here for
CAT Pack Prices





Fine Excellence (FE-Line) Low CFM The FE-Line low cfm (FELCFM) is HVLP and is designed around the Lynx L100H providing good atomization for portable applications with compressor output of 6 to 10 cfm. This gun weights 15 ounces, operates at 20-35 psi gun inlet pressure, and has stainless steel wet parts. This gun does differ from the L100H in that it does not have the stainless steel sleeve inside the aluminum gun head. Which we feel is desirable with any water-base stain, coating, or adhesive.
C.A.T. FE-Line Low CFM Spray Gun, this pressure feed HVLP Gun uses a standard set-up of .8mm for stains at 6 CFM.
Our Price
$324.75
Quantity



C.A.T. FE-Line Low CFM Spray Gun, this pressure feed HVLP Gun uses a standard set-up of 1.0mm for coatings at 6 CFM.
Our Price
$324.75
Quantity



C.A.T. FE-Line Low CFM Spray Gun, this pressure feed HVLP Gun uses a standard set-up of 1.2mm for coatings at 10 CFM.
Our Price
$324.75
Quantity



C.A.T. FE-Line Low CFM Spray Gun, this pressure feed HVLP Gun uses a standard set-up of 1.3mm for coatings at 10 CFM.
Our Price
$324.75
Quantity
FE-Line LCFM Gun
Click Here for
CAT Pack Prices





C.A.T. FE-Line LCFM Repair Kit, P/N 10-140
Our Price
$24.25
Quantity



C.A.T. LYNX L100C Conventional pressure feed spray gun 40-70 psi. Standard set-up 1.2 mm. Set-up range 0.6 to 2.8mm. To apply industrial coatings, high solids, and adhesives from a pressurized cup or tank resulting in a near class A finish. A wide variety of external and internal atomization set-ups are available for this gun. Stainless steel wet parts. 13 cfm. 100% Stainless Steel Fluid Passage.

Our Price
$251.25
Quantity



       

C.A.T. Lynx L100C Waterbase Adhesive Gun, Conventional Air Spray with Fly-Spec Atomizing Head. Some people call this set-up a tornado nozzle. Standard Orifice Size 1.8mm. This gun had 100% S.S. fluid passages and wet parts. This air cap and nozzle design works well with W/B Adhesives from Henkel and ITW-TACC, plus keeps the orifice from plugging up. 100% Stainless Steel Fluid Passage.

Our Price
$251.25
Quantity



C.A.T. LYNX L100H HVLP pressure feed spray gun 18-25 psi. Standard set-up 1.2 mm. Set-up range 0.5 to 1.7mm. To apply industrial, wood finishes and automotive paints from a pressurized cup or tank resulting in a class A finish. 8 cfm at 35 psi. Optional 6 cfm air cap for low viscosity coatings. 100% stainless steel fluid.

Our Price
$368.501
Quantity
C.A.T. LYNX L100H HVLP pressure feed spray gun 35-50 psi. Standard set-up 1.4 mm. Set-up range 0.5 to 1.7mm. To apply industrial, wood finishes and automotive paints from a pressurized cup or tank resulting in a class A finish. 22 cfm at 45 psi. 100% stainless steel fluid passage.

Our Price
$368.50
Quantity
C.A.T. LYNX L100H Waterbase Adhesive Gun, HVLP spray if required in your state. Standard Orifice Size 1.7mm. This gun has 100% S.S. Fluid passages and wet parts. This set-up works well with W/B adhesives from HENKEL and ITW-TACC, Plus the special needle in this gun help keeps the orifice from plugging up. 100% Stainless Steel Fluid Passage.
Our Price
$368.50
Quantity
C.A.T. LYNX MULTI-COLOR GUN, for spatter finishes using coating as Zolatone and Multispec. Conventional Internal Mix, continious bleeder gun. No fan control and has stainless steel passage, and wet parts. Includes a 1 quart pressure cup.
Our Price
$275.00
Quantity



10-106 Lynx and SLP Spray Gun Repair Kit Major repair kit.
Our Price
$29.10
Quantity



FINISH EXCELLANCE (FE-LINE) FINE FINISH

      

The FE-Line Fine Finish (FEFF) is HVLP and is designed around the CAT-SLP Gun, with the same 12 point air diffusion technology. Providing improved pattern coverage, uniformity, process capability and color consistency. NOt to forget the gun only weights 15 ounces. Operates at 29 psi, requiring 13.5 cfm inlet pressure, and has stainless stell wet parts. This gun differs from the SLP gun in that is does not have a stainless sleeve inside the aluminum gun head. We feel 100% stainless steel fluid passages is desirable with water-base stains, coatings, and adhesives.

C.A.T. FE-Line Fine Finish Spray Gun, this pressure feed HVLP spray gun uses a standard set-up of .8mm to apply stains for a class A finish.
Our Price
$354.00
Quantity



C.A.T. FE-Line Fine Finish Spray Gun, this pressure feed HVLP spray gun uses a standard set-up of 1.0mm to apply coatings for a class A finish.
Our Price
$354.00
Quantity



C.A.T. FE-Line Fine Finish Spray Gun, this pressure feed HVLP spray gun uses a standard set-up of 1.2mm to apply coatings for a class A finish.
Our Price
$354.00
Quantity



C.A.T. FE-Line Fine Finish Spray Gun, this pressure feed HVLP spray gun uses a standard set-up of 1.3mm to apply coatings for a class A finish.
Our Price
$354.00
Quantity



C.A.T. FE-Line Fine Finish Spray Gun, this pressure feed HVLP spray gun uses a standard set-up of 1.4mm to apply coatings for a class A finish.
Our Price
$354.00
Quantity
FE-Line Gun
Click Here for
CAT Pack Prices





FE-Line Fine Finish Repair Kit, P/N 10-140
Our Price
$24.25
Quantity



C.A. Technologies CPR-FE Pressure Feed Finish Excellence Gun. - The CPR stands for C.A.T. Reduced Pressure, or Compliant Air Spray, also referred to as High Transfer Efficiency (HTE). What all this means is almost the same 65% transfer efficiency as HVLP, but with the speed and finish of conventional air spray. These CPR guns are designed with the ability to switch between Reduced Pressure and HVLP by just exchanging the air cap. Currently the CRP guns are just being sold as CPR Packs with 2 additional orifice sizes. Go to CPR Packs for variations in the small body 15 ounce gun. Reduced pressure 11 CFM at 29 psi, and 13.5 CFM at 29 psi for HVLP.
CPR FE Gun
Click Here for
CAT Pack Prices





Think Outside the Other Stain Spray Gun
Outstanding Atomization of Wood Coatings

The new C.A.T. SLP-HVLP spray gun from C. A. Technologies applies a Class A stain and top coat finish. Already the SLP is recieving great reviews from woodworking finishers when spraying NGR dyes, stains, and toners to reduce mottling and haloing. Applies top coats with a smoke like atomization, and consistent color matching applications.

The SLP's even and fine atomization uses C. A. Technologies 12 point balanced plenum at 29 psi inlet pressure at 13.5 CFM resulting in 10 psi at the air cap. The C.A.T. SLP gun is 100% stainless steel (17.4 Ph heat treated) throughout the gun head. Set-up range 1.0mm to 2.2mm with built-in air control. For all wood, industrial and automotive coatings a built in air control is standard.

C.A.T. SLP-HVLP pressure feed spray gun. You will notice a softer spray with the 29 psi inlet pressure using 13.5 CFM. Standard Set-up 1.0mm, set-up range 1.0mm to 2.2mm. To apply industrial, wood, and automotive coatings for a Class A finish.
Our Price
$397.50
Quantity



C.A.T. SLP-HVLP pressure feed spray gun. You will notice a softer spray with the 29 psi inlet pressure using 13.5 CFM. Standard Set-up 1.2mm, set-up range 1.0mm to 2.2mm. To apply industrial, wood, and automotive coatings for a Class A finish.
Our Price
$397.50
Quantity



C.A.T. SLP-HVLP same as above, but with 1.3mm Set-up.
Our Price
$397.50
Quantity



C.A.T. SLP-HVLP same as above, but with 1.4mm Set-up.
Our Price
$397.50
Quantity
CSLP Gun
Click Here for
CAT Pack Prices





10-106 Lynx and SLP Spray Gun Repair Kit Major repair kit.
Our Price
$29.10
Quantity



C.A. Technologies CPR Pressure Feed Gun. - The CPR stands for C.A.T. Reduced Pressure, or Compliant Air Spray, also referred to as High Transfer Efficiency (HTE). What all this means is almost the same 65% transfer efficiency as HVLP, but with the speed and finish of conventional air spray. These CPR guns are designed with the ability to switch between Reduced Pressure and HVLP by just exchanging the air cap. Currently the CRP guns are just being sold as CPR Packs with 2 additional orifice sizes. Go to CPR Packs for variations in this 100% stainless steel fluid passage gun. Reduced pressure 11 CFM at 29 psi, and 13.5 CFM at 29 psi for HVLP.
CPR Gun
Click Here for
CAT Pack Prices





C.A. Technologies H2O CPR Pressure Feed Gun. - Same features and benefits as the standard CPR gun shown above. The H2O designation assures you this gun is 100% compatible with waterbase coatings, and the air atomizing design was based on just waterbase coatings.
H2O CPR Gun
Click Here for
CAT Pack Prices





Think Outside the Binks 2001 Air Spray Gun and use the TOMCAT for your General Purpose Industrial and Adhesive Spray Applications

The TOMCAT can be configured with over 30 pressure feed set-ups in traditional external mix, or internal mix, as well as sipon feed. Anodized forged aluminum body, stainless 2 piece nozzle and needle, 5 to 16 cfm. Listed below are several popular coating and adhesive spray gun set-ups.

C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed, Standard Set-up 1.3mm 15 to 35 seconds #2 Zahn cup otherwise same as above.
Our Price
$218.25
Quantity



C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed, Standard Set-up 1.8mm 20 to 50 seconds #2 Zahn cup otherwise same as above.
Our Price
$218.25
Quantity



C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed, Standard Set-up 2.2mm 30 to 60 seconds #2 Zahn cup, also used with zinc coatings, otherwise same as above.
Our Price
$218.25
Quantity



C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed, Standard Set-up 2.8mm over 60 seconds #2 Zahn cup, also used with zinc coatings, otherwise same as above.
Our Price
$218.25
Quantity



C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed, Solvent Adhesives, Standard Set-up 1.8mm otherwise same specifications as above, 16cfm.
Our Price
$218.25
Quantity
Glue (Adhesive) Presssure Pot Set-Up



C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed for low viscosity Solvent Adhesives, Standard Set-up 1.2mm otherwise same specifications as above, 16cfm.
Our Price
$218.25
Quantity



C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed with Internal Mix Standard Set-up 1.8mm otherwise same specifications as above, 5cfm. Ideal for multi-colors, texture coatings, undercoatings, block fillers, epoxies and others exceeding 60 seconds #2 Zahn cup.
Our Price
$218.25
Quantity



C.A.T. TOMCAT Model T100C Conventional Air Spray Pressure feed with Internal Mix Standard Set-up 2.8mm otherwise same specifications as above, 7cfm, ideal for multi-colors, texture coatings, undercoatings, block fillers, epoxies, and others exceeding 60 seconds #2 Zahn cup.
Our Price
$218.25
Quantity



In-Line Filter and Tube for Tomcat Gun. Keeps fluid hose at same length as air hose and results in a more compact gun. The In-Line filter is 100 Mesh. Note: This unit will also fit the Lynx, Panther, and SLP HVLP guns with the removal of the air micrometer on the gun handle.
Our Price
$82.92
Quantity



Screen 60 Mesh optional for above. Replaces Sata 12260.
Our Price
$4.58
Quantity



Screen 100 mesh standard for above. Replaces Sata 12278. Replaces 66-125 and 302091.
Our Price
$4.68
Quantity



C.A.T. TOMCAT Model T100C Conventional Air Spray Siphon feed gun with teflon coated 1 quart cup, 30-65psi, Standard Set-up 1.8mm To apply industrial, wood, and automotive coatings for a near Class A Finish 15 cfm at 50psi, stainless needle and nozzle, self adjusting needle packing, 15-50 seconds #2 Zahn cup.
Our Price
227.00
Quantity
10-112 TOMCAT Spray Gun Repair Kit
Our Price
$29.10
Quantity



TOMAHAWK

       
The TOMAHAWK does not replace the Tomcat, it provides the same results in a 5 ounce lighter gun body, which still can be configured into over 12 nozzle and air cap set-ups. Maximum orifice size 1.8mm. Anodized forged aluminum body. Stainless 2 piece nozzle and needle, 5 to 16 CFM. Listed below are several popular coating and adhesive spray gun set-ups.
     
C.A.T. TOMAHAWK Model T100C Conventional Air Spray Pressure feed, Standard Set-up 1.3mm 15 to 35 seconds #2 Zahn cup. Requires 13CFM.
Our Price
$213.25
Quantity



C.A.T. TOMAHAWK Model T100C Conventional Air Spray Pressure feed, Standard Set-up 1.8mm 20 to 50 seconds #2 Zahn cup. Requires 13CFM.
Our Price
$213.25
Quantity



C.A.T. TOMAHAWK Model T100C Conventional Air Spray Pressure feed, Standard Set-up 1.2mm 15 to 35 seconds #2 Zahn cup. Requires 13 CFM.
Our Price
$213.25
Quantity



C.A.T. TOMAHAWK Model T100C Conventional Air Spray Pressure feed, Solvent Adhesives, Standard Set-up 1.8mm, Requires 16CFM.
Our Price
$213.25
Quantity
10-140 Tomahawk Repair Kit
Our Price
$24.25
Quantity
Glue (Adhesive) Presssure Pot Set-Up



C.A.T. AUTOCAT A100C-1.2MM Conventional automatic spray gun 40-60 psi. Standard set-up 1.2 mm. Set-up range 0.6 to 2.8mm. Long lasting cartridge needle packing, versatile mounting positions, stainless wet parts. To apply industrial coatings, medium to high solids, and adhesives from a pressurized tank or pump resulting in a near class A finish. A wide variety of external and internal atomization set-ups are available for this gun. 9-12 cfm.
Our Price
$465.25
Quantity



C.A.T. AUTOCAT A100H-1.2MM HVLP Automatic spray gun 18-60 psi. Standard set-up 1.2 mm. Set-up range 0.5 to 1.7mm. Long lasting cartridge needle packing, versatile mounting positions, stainless wet parts. To apply industrial, wood finishes and automotive paints from a pressurized tank or pump resulting in a class A finish. 8-22 cfm.
Our Price
$557.50
Quantity



C.A.T. AUTOCAT A300H-1.0MM HVLP automatic spray gun, 13.5 cfm at 43 psi. Standard set-up 1.0 mm. Set-up range 1.0 to 2.2mm. Long lasting cartridge needle packing, versatile mounting positions, stainless wet parts. To apply industrial, wood finishes and automotive paints from a pressurized tank or pump resulting in a class A finish.
Our Price
$610.75
Quantity



C.A.T. AUTOCAT A300H-1.3MM HVLP automatic spray gun, 13.5 cfm at 43 psi. Same as above for high solids coatings exceeding 40 seconds in a #2 Zahn cup, Standard set-up 1.3 mm.
Our Price
$610.75
Quantity
10-107 Autocat Spray Gun Repair Kit Major repair kit.
Our Price
$29.10
Quantity



C. A. Technologies Automatic Gun Mount Aluminum assembly for light weight, 24' long, 5/8' rod. Mounts to 1' post and has standard 1/2' gun hole. P/N 60-624.
Our Price
$116.35
Quantity



C.A.T. PANTHER P200Z Conventional spray gun pressure feed style, 22 cfm at 50 psi. Designed for spraying zinc coatings. Standard setup 2.2mm, heavy duty spring, leather adjustable needle packings, stainless steel wet parts, Delrin nozzle orifice to prevent packing Setup range 1.8, 2.2, 2.8mm. Teflon coated air cap and gun body for easy cleanup. Built in air adjustment.

Our Price
$354.00
Quantity
10-108 Repair Kit for Panther P200Z Gun
Our Price
$36.85
Quantity
CSLP Gun
Click Here for
CAT Pack Prices





C.A.T. PANTHER P100G Conventional pressure feed spray gun designed. For contact cement, adhesives and glues. Standard set-up 1.8mm, teflon coated body and air cap for easy clean up. Built in air adjustment, stainless steel wet parts and fluid passages and heavy duty spring for better shut off.
Our Price
$290.00
Quantity
10-110 Spray Gun Repair Kit for Panther P100G and other Panther Guns.
Our Price
$29.10
Quantity



 
C.A.T. LYNX L100H One Qt. Pressure Cup Outfit For use with compressor output of 8 cfm at 20 psi. HVLP Technology, stainless wet parts, air control. Standard set-up 1.2 mm. The diaphram regulator adjusts the cup pressure enabling softer atomization with small compressors. For use with lacquers, waterbase clears, basecoats, enamels and high sold coatings. AFS-1141.
Our Price
$483.75
Quantity



    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30
Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com



Content Copyright © 1997-2014 by  Finish Systems.