C.A.Technologies
Top Outlet Stainless Steel Paint Pressure Pots
Paint Pressure Tanks


If your preferred Pot (Tank) requirements are not listed please call us.

NOTICE: We want to make prospective pressure pot customers aware of corrosion issues using water base coatings, and especially water solutions in Teflon coated pressure tanks, or aluminum 2 quart cups.

Water-base coatings and solutions contained in closed Teflon tanks can develop rust where the film is broken around the gasket ring welds. Plated steel fittings, which penetrate the lid will also rust from the humidity contained in a closed tank. When every day coatings and solutions contain water we recommend stainless steel pressure tanks.

Aluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.

1 Quart Stainless Steel Cup - For corrosive coatings. Thick wall stainless cup with robust bail and cup horns. Includes relief valve and AFS-1202 check valve. Compare to ISC-400, TSC-591, 80-500, and 80-510.
Our Price
$169.75
Quantity




1 Quart Stainless Steel Cup - For corrosive coatings. Thick wall stainless cup with robust bail snd cup horns. Includes special pass-thru regulator, relief valve and AFS-1202 check valve. Compare to 80-511, and 98-1141.
Our Price
$232.75
Quantity




C.A. Technologies 60 Gallon Bottom or Top Outlet Stainless Steel Pressure Tank (Pot) - This CE labeled, Non-ASME tank is rated to 60 psi with: pneumatic agitation, single air regulator, 1 1/4" fill port, pressure gauge, and safety relief valve. The polished 304 stainless steel tank is mounted on wheels with a concave bottom outlet with 1" stainless pipe and ball valve. The 5:1 reducer is driven by a 1/3 H.P. pneumatic motor with twin stainless agitation blades. Inside dimensions: 22" diameter by 43" deep. Estimated shipping weight is 330 lbs. This 60 gallon tank DOES NOT qualify for free freight, and ships via Common Carrier.
Our Price
$9406.00
Quantity

C.A. Technologies 60 Gallon Bottom or Top Outlet Stainless Steel Pressure Tank (Pot) - This CE labeled Non-ASME tank is rated to 60 psi without pneumatic agitation, includes: single air regulator, 1 1/4" fill port, pressure gauge, and safety relief valve. The polished 304 stainless steel tank is mounted on wheels with a concave bottom outlet with 1" stainless pipe and ball valve. Inside dimensions: 22" diameter by 43" deep. Estimated shipping weight of 330 lbs. This 60 gallon tank DOES NOT qualify for free freight, and ships via Commom Carrier.
Our Price
$7171.00
Quantity

2.5 Gallon Stainless Steel Pressure Pot (Tank) - All stainless with wheels and single regulator, non-ASME. Includes one ball valve, pick-up tube has screen. Maximum pressure 80 psi.
Our Price
$1026.00
Quantity

2.5 Gallon Stainless Steel Pressure Pot (Tank) - Same as above with dual regulators.
Our Price
$1049.00
Quantity




2.5 Gallon Stainless Steel Pressure Pot (Tank) - Same as above with dual regulators, and Pneumatic Agitation. See Note #1.
Our Price
$1341.00
Quantity




51-220 Gasket - For 2.5 Gallon Stainless Steel Pot (Tank).
Our Price
$31.10
Quantity




           
Formed Rigid 2.5 Gallon Pressure Pot Liners for 2.5 gallon tanks; part numbers 51-201, 51-202, 51-203, and 51-204. Replaces liner part numbers 51-261-12, 65-913F-12, 671012, 671060, 63-913G-23, 94-808, 94-808/12. These anti-static liners are packed 12 per carton. They also fit 2.5 gallon tanks by AOM-Asturo, Accuspray, CapSpray, Sata, and Turbinaire, which are 10-3/8" inside diameter and 8-3/4" deep. Same as 65-913-10 and 65-913-60.

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
1 Ctn/12 Pk
Our Price
$56.25
Ctn Qty
1 Ctn/30 Pk
Our Price
$134.10
Ctn Qty
1 Ctn/60 Pk
Our Price
$245.50
Ctn Qty
2 Ctns/60 Pk
Our Price
$240.59
Ctn Qty



51-231-10 Bags 2.5 Gallon Pot (Tank) - 10 poly bags per carton.
Our Price
$40.10
Quantity




5 Gallon Stainless Steel Pressure Pot (Tank) - All stainless with wheels and single regulator, non-ASME. Includes one ball valve, and pick-up tube has screen. Maximum pressure 80 psi.
Our Price
$1445.00
Quantity




5 Gallon Stainless Steel Pressure Pot (Tank) - Same as above with dual regulators.
Our Price
$1481.00
Quantity




5 Gallon Stainless Steel Pressure Pot (Tank) - Same as above with single regulator, and Pneumatic Agitation. See Note #1.
Our Price
$1737.00
Quantity




5 Gallon Stainless Steel Pressure Pot (Tank) Single Regulator - Non-ASME rated to a maximum of 80 psi, 3/4" bottom outlet ending with a 3/4" SS ball valvle, non-agitated, mounted on wheels.
Our Price
$1617.00
Quantity




51-543-10 4 mil bags - For 5 & 10 gal. pressure pots. 10 per package
Our Price
$93.60
Quantity




51-520 Gasket - For 5 Gallon Stainless Steel Pot (Tank)
Our Price
$35.90
Quantity




12.5 Gallon Stainless Steel Pressure Pot (Tank) - with single regulator and pneumatic agitation mounted on wheels. NON-ASME rated and includes two ball valves and pick-up tube has a screen. Maximum pressure 80 psi. See Note #1 an optional second regulator can be added. P/N 51-883.

This item DOES NOT qualify for Free Freight and may require shipment by truck.
Our Price
$2075.00
Quantity




12.5 Gallon Stainless Steel Pressure Pot - same as above without pneumatic agitation, and single regulator. An optional second regulator can be added. P/N 51-881

This item DOES NOT qualify for Free Freight and may require shipment by truck.
Our Price
$1962.00
Quantity




12.5 Gallon Stainless Steel Pressure Pot - Single regulator without pneumatic agitation. Non-ASME rated to 80 psi. 3/4" SS Conical bottom outlet ending with a 3/4" SS ball valve, mounted on wheels.

This item DOES NOT qualify for Free Freight and may require shipment by truck.
Our Price
$2205.00
Quantity




12.5 Gallon Stainless Steel Pressure Pot - Single regulator with pneumatic agitation. Non-ASME rated to 80 psi. 3/4" SS Conical bottom outlet ending with a 3/4" SS ball valve, mounted on wheels.

This item DOES NOT qualify for Free Freight and may require shipment by truck.
Our Price
$2575.00
Quantity




51-543-10 4 mil bags - For 5 & 10 gal. pressure pots. 10 per package
Our Price
$93.60
Quantity



Note #1 - We recommend adding one drop of oil per day to the agitation motor, or attach a mini lubricator (by others) for automatic lubrication.

    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.