COL-MET Bench Booths comply with all OSHA and NFPA regulations.
The 18 gauge, slotted, galvanized panels are double flanged for added strength. The fans are tubeaxial, non-sparking and include a belt guard. The motors are 3-phase, and are open drip proof (ODP). Optional three phase and explosion proof motors are available. The overhead light fixtures are UL Listed and rated at Class 1, Division 2 sealed and gasketed. The fixtures are 4' in length and use 32 watt forescent tubes which ARE NOT PROVIDED.
These booths come with the first set of fiber-glass exhaust filter media and OSHA required manometer. Installation instructions, fasteners, latches, and gray sealants are provided.
The bench booth fan CFM is rated for 1/2" of static pressure. The exhaust fan is 20" tall, and can be either mounted on the top or back of booth.
**NOTE: Our booths have pre-punched flanged panels with a fold-back and are assembled with Grad 5 nuts and bolts. Many competitor brands require assembly with Tek Screws. Not only is it difficult to get the Tek Screws to be uniform, invariably the panels will not hang square. This is a serious problem when it becomes time to hang booth doors. The combination of keeping Tek Screws uniform and panels square adds 50% to the assembly time.