Enclosed Non-Pressurized Cross-Draft Spray Booths, Less than 16' in Working Depth
COL-MET Cross-Draft Booths comply with all OSHA and NFPA regulations.
The 18 gauge, slotted, galvanized panels are double flanged for added strength. The fans are tubeaxial, non-sparking and include a belt guard. The motors are Tri-Voltage 3-Phase, and are open drip proof (ODP). Optional single phase and explosion proof motors are available. The overhead light fixtures are mounted behind clear tempered class. and are UL Listed and, approved for their untended use and placement (at least 3'-0" from booth openings). The fixtures are 4' in length and use 32 watt forescent tubes which ARE NOT PROVIDED.
These booths come with the first set of fiber-glass exhaust filter media and OSHA required manometer. Installation instructions, fasteners, latches, and gray sealants are provided.
The CFM on these Cross-draft booths is rated for 1/2" of static pressure. The exhaust fan is 26" tall, and these enclosed booths will include the first set of intake filters. Double filtered product doors are standard.
Booth Options
N.C. air soleniod valve, AFS-1173 $263.44.
Control Panerls to operate the fan and lights. These panels are NEMA-12 and UL Listed, $1056.91
Duct Work
Single Phase, or Explosion Proof fan motors
Pressurized Booths
Air Make-Up Units
Downdraft Booths
Drive Thru Doors, or Reverse-Flow Exhaust
NO WAY CAN WE LIST ALL THE POSSIBLE BOOTH CONGIFURATIONS, SO PLEASE CALL US WITH YOUR REQUIREMENTS.
**NOTE: Our booths have pre-punched flanged panels with a fold-back and are assembled with Grad 5 nuts and bolts. Many competitor brands require assembly with Tek Screws. Not only is it difficult to get the Tek Screws to be uniform, incariably the panels will not hang square. this is a serious problem when it becomes time to hang booth doors. The combination of keeping Tek Screws uniform and panels square adds 50% to the assembly time.
