Economy Pressure Pots

NOTICE: We want to make prospective pressure pot customers aware of corrosion issues using water base coatings, and especially water solutions in Teflon coated pressure tanks, or aluminum 2 quart cups.

Coatings and solutions contained in these closed Teflon tanks can develop rust where the film is broken around the gasket ring welds. Plated steel fittings, which penetrate the lid will also rust from the humidity contained in a closed tank. When every day coatings and solutions contain water we recommend stainless steel pressure tanks.

Aluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.

2 Qt. Pressure Cup, Aluminum cup and lid, brass pick-up tube. Single diaphragm regulator. 1/4" NPS air, and 3/8" NPS standard fluid fittings. Replaces QS-64A and A4200.
Our Price
$93.46
Quantity



2 Qt. Pressure Cup, same as above with dual regulators. Replaces QS-64AD
Our Price
$145.68
Quantity



Gasket, Lid, 2 Qt. Pressure Cup For above single & dual regulator pressure cups.
Our Price
$6.35
Quantity



Regulator, 2 Qt. Pressure Cup For above single & dual regulator pressure cups.
Our Price
$38.88
Quantity



  
AOM-Spray-Asturo Wide Mouth 2 Qt. Cup Aluminum tank and lid, stainless pick-up tube, 6" diameter with 4 1/4" opening. Rated to 50 psi. Sale Ends 7-30-13.
Reg Price
$148.25
Sale Price
$140.84
Quantity



ECONOMY 2.5 gal. Pressure Pot Baked coating on steel tank and lid. Non-ASME, 80 psi maximum pressure. Dual regulator, mounted on wheels with galvanized pickup tube with screen. Replaces A.O.M.-Asturo 65-911 and 65-912, Turbinaire FDS-2010, same as A4166 and QS-288D with our optional S.S. pick-up tube.
Our Price
$291.92
Quantity




          

ECONOMY 2.5 GAL. PRESSURE POT, baked coating on steel tank and lid. Pneumatic Agitation, dual regulators, Non-ASME, 80 psi maximum pressure. Mounted on wheels, stainless steel liner, with galvanized pick-up tube with screen. Replaces Turbinaire FDS-2010A, same as QS-288DA with our optional S.S. pick-up tube.
Our Price
$553.00
Quantity




51-220 Gasket 2.5 gal. pots, same as QS-28884.  
Our Price
$27.15
Quantity
 



 
Formed Polyethylene Liners - For 2.5 Gallon pots. 12 per carton. Same as 65-913-10
Our Price
$33.55
Quantity
Formed Polyethylene Liners - For 2.5 Gallon pots, 30 per carton.
Our Price
$71.60
Quantity
Formed Polyethylene Liners - For 2.5 gallon pots. 60 per carton. Same as 65-913-60

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
1 Ctn/60 Pk
Our Price
$106.70
Ctn Qty
2 Ctns/60 Pk
Our Price
$98.25
Ctn Qty



Stainless Steel Pickup Tube For 2.5 gallon pressure pot. P/N 7535-11. Converts a tank to a stainless fitted pick-up tube.
Our Price
$18.95
Quantity
 



Dual Regulator Set which fits 2.5, 5, 10, and 15 gallon Economy Pressure Tanks. this unit will work on any brand of tank with a 1/4" NPT port in the lid. P/N AFS-1355.
Our Price
$91.80
Quantity
 



ECONOMY 5 Gallon Pressure Tank, dual regulators and mounted on wheels. Non-ASME rated to 80 psi tank pressure. Baked finish inside and out. Galvanized pick-up tube
Our Price
$493.94
Quantity



ECONOMY 5 Gallon Pressure Pot, dual regulators, stainless steel removeable liner hand agitation and mounted on wheels. Non-ASME, rated to 80 psi tank pressure. Baked finish inside and out, galvanized pick-up tube. Same as Turbinaire FDS-2020M.
Our Price
$557.78
Quantity



      
ECONOMY 5 Gallon Pressure Pot, single regulator, stainless steel fitted with stainless steel removeable liner and stainless steel fitted mounted on wheels. NON-ASME rated to 80psi tank pressure. Baked on teflon finish.
Reg Price
$570.00
Quantity
ECONOMY 5 Gallon Stainless Steel Fitted Pressure Pot, same as above with dual regulators.
Reg Price
$641.25
Quantity



      
ECONOMY 5 Gallon Pressure Pot, dual regulators, stainless steel removeable liner pneumatic agitation, and mounted on wheels. Non-ASME, rated to 80 psi tank pressure. Baked finish inside and out, galvanized pick-up tube. Replaces Turbinaire FDS-2020A. Same as QS-640AD with optional S.S. pick-up tube.
Our Price
$798.84
Quantity
7540-56SS Pick-up Tube Stainless, for Economy 5 gallon Pressure Pot. converts a tank to a stainless fitted pick-up tube.
  Our Price
$42.45
Quantity
51-520 Gasket, for Economy 5 gallon Pressure Pot. Same as 65-0616.
  Our Price
$30.55
Quantity
51-543-10 Bags, 4 mil, for 5 & 10 Gallon Pressure Pots, 10 per package. Same as 65-51543-10
  Our Price
$92.10
Quantity



PLB1108-12 Liner 5 Gallon - These Formed Polyethelene Anti-static Liners are the closest in size that we have for the C.A.T. 5 gallon tanks. These liners are the correct depth, but are 12" in diameter rather than 12-1/2" in diameter. 12 liners per carton
Our Price
$47.60
Quantity



ECONOMY 10 Gallon Pressure Pot, with built-in hand crank agitation, dual pressure regulators, stainless steel removable liner and mounted on wheels. Non-ASME, rated to 80 psi tank pressure. Baked finish inside and out galvanized pick-up tube. Replaces Turbinaire FDS-2040M.
Our Price
$797.87
Quantity



      
ECONOMY 10 Gallon Pressure Pot, with dual regulators and pneumatic agitation. Has a stainless steel removeable liner and mounted on wheels. Non-ASME, rated to 80 psi tank pressure. Baked on finish inside and out, galvanized pick-up tube. Contact us for a set-up with gun and hose set. Replaces Turbinaire FDS-2040A and A.O.M.-Asturo 65-742.
Our Price
$1068.75
Quantity
ECONOMY 10 Gallon Pressure Pot, with dual regulators and without agitation. Has a stainless steel removeable liner and mounted on wheels. Non-ASME, rated to 80 psi tank pressure. Baked on finish inside and out, galvanized pick-up tube. Contact us for a set-up with gun and hose set. Replaces Turbinaire FDS-2040A and A.O.M.-Asturo 65-744.
Our Price
$709.20
Quantity
7550-56SS Stainless Pickup Tube, for Economy 10 gallon Pressure Pot.
  Our Price
$52.62
Quantity
51-520 Gasket, for Economy 10 gallon Pressure Pot. Same as 65-0616.
  Our Price
$30.55
Quantity
51-543-10 Bags, 4 mil, for 5 & 10 Gallon Pressure Pots, 10 per package. Same as 65-51543.10.
  Our Price
$92.10
Quantity



ECONOMY 15 Gallon Pressure Pot, with dual regulators and pneumatic agitation. Has a stainless steel removeable liner and mounted on wheels. Non-ASME, rated to 80 psi tank pressure. Baked on finish inside and out, and looks like 10 gallon tank above but is 2.5" wider, galvanized pick-up tube. Contact us for set-up with gun gun and hose set. Replaces Turbinaire FDS-2060A and A.O.M.-Asturo 65-844. This 15 gallon tank does not qualify for free freight.

This item Ships Separately.
This item DOES NOT qualify for Free Freight and may require shipment by truck.
            Our Price
$1221.73
Quantity
ECONOMY 15 Gallon Pressure Pot, with dual regulators and without agitation. Has a stainless steel removeable liner and mounted on wheels. Non-ASME, rated to 80 psi tank pressure. Baked on finish inside and out, and looks like 10 gallon tank above but is 2.5" wider, galvanized pick-up tube. Contact us for set-up with gun gun and hose set. Same as A.O.M.-Asturo 65-844. This 15 gallon tank does not qualify for free freight.

This item Ships Separately.
This item DOES NOT qualify for Free Freight and may require shipment by truck.
            Our Price
$887.40
Quantity
51-720 Gasket, for Economy 15 gallon tank.
  Our Price
$38.80
Quantity
Stainless Steel Pick-up Tube, for Economy 15 gallon Pressure Pot. Converts a tank to a stainless stell pick-up tube.
  Our Price
$49.39
Quantity



    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Pumps | Supplies | AAA | Spray Booths
Clearance | Setups | Air Purification | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.