Paint Shakers
Paint Agitation
Paint Mixing (Mixers)

Within these pages are paint shakers to initially put coatings back into proper dispersion prior to use, and agitation (mixing) units to keep coatings from settling during use.

Listed below are both pneumatic and electrical paint shakers. The Pneumatic Models are ideal for use in hazardous solvent areas such as: spray booths, paint kitchens, and mix rooms. The H-5 Electrical Model can be equipped with explosion-proof components.

 
A97 Pneumatic Paint Shaker Shakes pints, quarts, gallons, 4 liter cans including rectangular cans and aerosols, A383 aluminum housing, 5 CFM @ 70-175 psi. Grease fitting for bearing, made in USA. Includes regulator and lubricator. 2 year warranty.
Our Price
$637.33
Quantity

 
A97P Paint Shaker Floor Stand 30" floor stand for A97 paint shaker.

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Our Price
$80.40
Quantity

   
Pneumatic Paint Shaker Shakes pints, aerosols, quarts, and gallons. Aluminum Housing, 6 CFM at 20-175 psi. Grease fitting on bearing. Includes: lubricator, ball valve, and speed control with rubber coated jaws. Made off-shore with 1 year limited warranty.
Our Price
$164.80
Quantity

   
Paint Shaker Floor Stand, For above model shaker, 30" high.

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Our Price
$68.54
Quantity


Model H-5 Five-Gallon Mixer/Shaker, 120V/60Hz. F.O.B. Shipping Point

H-5 Five-Gallon Mixer/Shaker When reliability, safety, and ease of use are your primary requirements, the H-5 Five Gallon Mixer is a great solution for High Volume Paint Stores, Home Center paint departments, and Independent Paint and Decorating Dealers. Verify your pail will fit inside 11.250" diameter tub. Not to be used with solvent coatings.

High Speed Using an agressive dual rotation mixing action, the H-5 mixes paint and coatings quickly and quietly. The non-slip gear drive ensures that paint and colorants are thoroughly blended. The H-5 mixes a typical pastel-tinted five-gallon container in less than two minutes and a typical deep-tone colored five-gallon container in less than three minutes.

Rugged, reliable and energy effiecient The H-5 Five-Gallon Mixer features heavy-duty rugged components. The non-slip gear drive is designed for years of maintenance free reliable operation. The H-5 utilizes a high efficiency Wattrimmer® motor to reduce electrical power consumption and help hold down operating costs. The slow start, split phase motor, v-belt design extends the life of key components while eliminating the need for expensive gear boxes, speed reducers, and soft start modules. The energy efficient motor is totally enclosed and permanently lubricated. End the frustration of inaccurate and broken mechanical timers with our unique digital touch pad.

Easy to use The H-5 Five-Gallon Mixer has an ergonomically designed cabinet. The low lift height allows for easy drop-in of five-fallon containers over the center of the machine. The design allows workers to get close to the mixer, reducing fatigue and increasing productivity. The press of just one button starts the mixer. Three pre-set mix times for light, medium and dark colors take the guesswork out of paint mixing. The run time and cycle count digital indicator gives mixer status at a glance and facilitates rotation of multiple units. Rear mounted rollers allow the machine to be easily moved into position.

Safe to operate The H-5 was designed with employee and customer safety as a primary objective. The mixer has a fully enclosed cabinet with a safety interlock that prevents operation when the door is open. The H-5 is built to the exacting safety standards of an internationally recognized testing laboratory.

Purchase decision criteria:

  • Not to be used with solvent coatings.
  • Inside diameter for 5 gallon tub is 11.250"
  • Safe to operate
  • Long life gear drive
  • Energy efficient, enclosed, permanently lubricated motor
  • One step loading (no bail holder)
  • One touch pre-programmed accurate digital timer
  • Self-leveling, rear rollers, easy to install
  • Also mixes gallons with adapter
  • Two-year warranty backed by a solid national service organization
Height 40" (102 cm), Width 24" (61 cm) and Depth 32" (81 cm). $4223.00 F.O.B. Shipping Point. Call to place your order. All 5 gallon shakers are subject to State and Local tax.

 
Optional 1 Gallon Adaptor for H-5
Our Price
$108.00
Quantity

If you need an Explosion-Proof 5 gallon pail mixer, we can provide one with Gyro Rotation (360 degrees) in single or three phase $7750.00 F.O.B. Shipping Point. Call to place your order.
 

Paint Agitation
Paint Mixing (Mixers)

Listed below are various configurations of pneumatic paint and coating agitation units.

Pneumatic Hand Agitation, 5 Gallon Pails quickly mix-up coatings which have settled out. Variable speed control of 6-1/2" three blade propellor, attached to a 21-1/2" long stainless steel shaft. See note #1. Same as QS-HA1.
Our Price
$323.35
Quantity

 
Pneumatic Pail Agitation, 5 Gallon Pails Continuely mixes coatings with variable speed control so they do not settle. Stainless steel pail cover. Direct drive air motor with stainless steel shaft and 4" blade. The cover is without a siphon hole and can be pre-drilled for an additional $45.00. See note #1.
Our Price
$568.69
Quantity

 
Pneumatic Drum Agitation, 55 Gallon Drum Continuely mixes coatings with variable speed control so coatings are in proper suspension and do not settle. Stainless steel drum cover. Direct drive air motor with stainless steel shaft, dual 6-1/2" blades. See note #1, similar to 31-129. The cover is without a siphon hole and can be pre-drilled for an additional $45.00.
Our Price
$825.09
Quantity

The photos above show the 55 gallon Pneumatic Drum Agitation Unit and Cover with optional Pneumatic Cover Elevator, and a 10 GPM Stainless Steel Diaphrigm Pump for multiple spray gun operation.

Note #1 - We recommend adding one drop of oil per day to the agitation motor, or attach a mini lubricator (by others) for automatic lubrication.

    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Pumps | Supplies | AAA | Spray Booths
Clearance | Setups | Air Purification | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Site designed © 2000-2009, & maintained by  Oak Hill Internet Design.    
Content Copyright © 2000-2009 by  Finish Systems.