51-130 C.A. Technologies 2 Qt. Pressure Cup - 64 ounce aluminum cup, single regulator, maximum pressure 50 psi. Compare quality and price against other brand names. Polyurethane gasket material.
Our Price $130.53	Quantity

AFS-1102 C.A. Technologies Pressure Cup - Same as above with dual regulators.
Our Price $168.30	Quantity
51-140 Gasket for 51-130 & AFS-1102 2 qt. cups.
Our Price $3.66	Quantity

51-600 C.A. Technologies "Bandit" 2 Qt. Pressure Cup - The 2 qt Bandit from C.A.T. is far and away the best 2 qt. in the industry today at the right price. The band clamp offers 360° of sealing pressure with a turn on one knob. No threads to stick and no multiple lid clamps to turn. Comes with a rigid liner for quick color change and cleaning. The underside of the lid, fittings, and pick-up tube are all 300 series stainless steel and comes with a splash guard so you don't have to worry about waterborne materials or corrosion. The wide opening makes filling and refilling a snap. The standard fluid pressure set-up is 0-15 PSI which works well for all coatings except Latex, and with hose lengths under 15 feet. If you are using Latex or hoses over 15 feet, advise us so we can set-up with optional 0-50 PSI fluid pressure. The Bandit offers all the features you need in a 2 qt. It's a great all around value.
Our Price $268.19	Quantity
51-602 2 Qt. Pressure Cup - Same as above but with two air regulators.
Our Price $287.99	Quantity

C. A. Technologies "Bandit" 2 Qt. Pressure Cup with Pneumatic Agitation - same features and benefits as the 51-600 shown above, except with an adjustable air motor with S. S. propeller. Ideal for keeping coating which settle out in proper suspension, single regulator.
Our Price $718.16	Quantity

AFS-1059 2 Qt. Rigid Liners - 12 per carton.
This item Ships Separately.
Our Price $20.27	Quantity

      

Stand (Holder) for Bandit 2 Qt. Cup, or for other brands of 2 qt. cups. Inside diameter 6-1/8".
This item Ships Separately.
Our Price $62.65	Quantity

Economy Touch-up Cup - with standard 1/4" NPS female swivel fitting for siphon touch-up guns, 200 ml capacity, aluminum material.
Our Price $10.00	Quantity

ECONOMY Siphon Cup 1 qt. conventional, siphon style, dripless, aluminum quart cup with splash guard. Standard 3/8" NPS swivel fitting. Replaces P/N QS-68C1, 103-NC, 45-1235.
Our Price $13.12	Quantity

Teflon Cup Siphon Style , 1 qt. dripless aluminun with a quality Tefon finish inside and outside. A standard 3/8" NPS swivel fitting for any brand of siphon gun and includes splash guard.
Our Price $20.81	Quantity

1 Liter Aluminum Cup, for siphon cups with splash guard, and pick-up screen. Has standard 3/8" NPS swivel fitting on pick-up tube.
Our Price $11.88	Quantity

104-1 Nylon Cup With Lid Siphon style, 1 qt. cup to use with your existing bale type siphon. Cover for short term coating storage. The graduations on side of cup are in milliliters and ounces
Our Price $3.95	Quantity

51-303R ECONOMY Pressure feed 1 quart cup mounted on any brand pressure feed gun Aluminum cup with in-line regulator to adjust for proper fluid pressure. Absolutely the best way to spray medium to high solids coating from a 1 quart cup. Maximum cup pressure 10 psi. Lynx spray gun not included. Compare to QS32.
Our Price $106.03	Quantity

In-Line Check Valve, for pressure assist 1 qt. cups. (1/8") 4mm I.D. polyurethane tubing 10"long. Replaces Binks 54-4322, 54-4321 and 54-4326, C.A.T. 51-324.
Our Price $3.78	Quantity

In-Line Check Valve, same as above, but in a 3 pack. Replaces Accuspray 94-049/3.
Our Price $11.98	Quantity

ECONOMY 2 Liter Cup With die-cast aluminum lid with handle, regulator, and aluminum cup. Compare to QS-64A.
Our Price $86.21	Quantity
51-140 Gasket - for 2 Litre cup, compare to QS-64A28.
Our Price $3.66	Quantity

750cc Gravity cup - Aluminum Nominal size 600cc. The lid has a gasket and screws on and off with 1/8 turn. Fits gravity guns requiring a cup with female 16MM x 1.5MM threads, see note #1. Replaces PCG7M, 6601,1404,51-401, 157 and QS-600STC, QS-600ALC and RL80C.
Our Price $14.90	Quantity

1000cc (Liter) Gravity Cup - Aluminum The gasketed lid screws on and off with 1/8 turn. Fits gravity guns requiring a cup with female 16MM x 1.5MM threads, see note #1. Replaces PCG10M, 46631, 18503SE, 51-403, 159, QS-1000STC and RL1000CC.
Our Price $17.08	Quantity

750cc Gravity Cup - Nylon (Plastic) Nominal size 600cc. Fits gravity guns requiring a cup with female 16MM x 1.5MM threads, see note #1. Replaces PCG6M, 49379, 18500SE, 51-400, 158 and QS-600NYC.
Our Price $8.77	Quantity

Gravity Cup Strainer 1-5/8" long (.455 dia.). Replacement for Sata 3988-5 and 3988. Also replaces A.O.M. Asturo 304117 and Devilbiss KGP-5-K5 (our P/N AFS-1204). 10 per package.
Our Price $13.30	Quantity

125ml Nylon Gravity Cup, for mini touch-up guns. Replaces 51-407
Our Price $9.50	Quantity

125ml Aluminum Gravity Cup, for mini touch-up guns. Compare to QS-125ALC, replaces 51-406.
Our Price $11.25	Quantity

EZ LinersTM for Gravity Cups The DeVilbiss OMX-70-K48 is a universal cup liner kit. Includes 48 bags and an assortment of cup adapters to fit these model guns: Binks M1G, Sharpe (metal cup) platinum, Sata (metal cup) JET/B, NR-95-HVLP, JET 90, MCB-NVLP, Sata (plastaic cup) JET 90, MC-B, MCb-HVLP, Sharpe (plastic cup) Cobolt and Platinum, Iwata LPH-94 and LPH-100, and all DeVilbiss plastic and metal cups.
Our Price $39.25	Quantity