{"title":"Coated Steel","description":"","products":[{"product_id":"copy-of-c-a-technologies-2-5-gallon-pressure-tank","title":"C.A. Technologies 2.5 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe 2.5 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-201) or dual regulators (51-202) and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease note that replacement liners are available under item number SS11-75. In addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-211 (single regulator) or 51-212 (dual regulators) for similar tank configurations in a bottom outlet tank.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_201-202-202SS-207_Part_Sheet.pdf?5069114379968699474\" style=\"color: #0000ff;\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003e2.5 Gallon Paint Pressure Tank (51-201 \u0026amp; 51-202) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-201)","offer_id":28358826761,"sku":"X00042696","price":650.83,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-202)","offer_id":28358826377,"sku":"X00008179","price":685.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/CA51-201-pressure-pot-2.5-gal-1r_a5efee6f-a31a-4769-a95a-ae3bf034ca98.jpg?v=1487806027"},{"product_id":"copy-of-c-a-technologies-2-5-gallon-pressure-tank-with-pneumatic-agitation-mixer-single-regulator","title":"C.A. Technologies 2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 2.5 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-203) or dual regulators (51-204) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003ePlease note that\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e replacement\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e liners are available under item number SS11-75.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-213 (single regulator) or 51-214 (dual regulators) for similar tank configurations in a bottom outlet tank.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_203-204_Part_Sheet_6edf9115-5dc8-4b19-a429-265b4241f323.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (51-203 \u0026amp; 51-204) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI','sans-serif';\"\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-203)","offer_id":28359270089,"sku":"X00042698","price":1196.87,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-204)","offer_id":28359490889,"sku":"X00042699","price":1257.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-203_8ff66245-4e56-4d72-a207-953ae7267836.JPG?v=1480620810"},{"product_id":"copy-of-c-a-technologies-5-gallon-pressure-tank-single-regulator","title":"C.A. Technologies 5 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe 5 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-507) or dual regulators (51-508) and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 5 gallon pails will fit inside the tank\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that rigid liners are available under item number PLB-1108 (These liners are the correct depth, but are 12” in diameter which is slightly undersized).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIf you would rather use a bag liner please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel pick-up tube is available under part number 7540-56SS.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-511 (single regulator) or 51-512 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_501-502-507-508_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff; text-decoration: underline;\" target=\"_blank\"\u003e5 Gallon Paint Pressure Tank (51-507 \u0026amp; 51-508) Part Sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-507)","offer_id":28360823689,"sku":"X00008311","price":1050.1,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-508)","offer_id":28360881225,"sku":"X00008314","price":1138.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-507_a22c38ea-316a-4f1b-882c-435bc0c53737.JPG?v=1487968702"},{"product_id":"copy-of-c-a-technologies-5-gallon-pressure-tank-with-pneumatic-agitation-mixer-dual-regulator","title":"C.A. Technologies 5 Gallon Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 5 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-503) or dual regulators (51-504) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 5 gallon pails will fit inside the tank\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for this agitated tank.  Please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel pick-up tube is available under part number 7540-56SS.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-514 (single regulator) or 51-515 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_503-504_Part_Sheet.pdf?14111898503301129628\" target=\"_blank\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003cspan class=\"s1\"\u003e5 Gallon Pressure Tank (51-503 \u0026amp; 51-504) Parts Sheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-503)","offer_id":28472468169,"sku":"X00008305","price":1745.57,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-504)","offer_id":28472485001,"sku":"X00008306","price":1763.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-503_ddc27fc9-f894-48cb-8aab-3b27418eb100.JPG?v=1488571371"},{"product_id":"copy-of-c-a-technologies-resin-casting-5-gallon-pressure-tank","title":"C.A. Technologies Resin Casting 5 Gallon Pressure Tank","description":"\u003cp\u003eThe non-ASME, resin casting (mold) pressure tank from C.A. Technologies comes configured with a single air pressure regulator and No pickup tube. The pressure pot is available in 2.5, 5, 10, 15 and 20 gallon sizes and is constructed of a heavy gauge steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 gallon tank (inside diameter is 12.5” and inside depth is 15.5”)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003eTop outlet tank\u003c\/li\u003e\n\u003cli\u003eSingle air pressure regulator\u003c\/li\u003e\n\u003cli\u003eNo pickup tube (pickup tube has been removed for casting applications)\u003c\/li\u003e\n\u003cli\u003eIncludes casters for the tank\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003e3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003cli\u003eFlat bottom tank\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet-up Information: \u003c\/strong\u003eWhen installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12\" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_501-502-507-508_Part_Sheet.pdf?14111898503301129628\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan class=\"s1\"\u003e5 Gallon Resin Casting Pressure Tank (51-507C) Part Sheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":28472592009,"sku":"X00012186","price":1059.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-507_5af2f2ac-5bad-421e-9a4d-786bd41786d7.JPG?v=1521149649"},{"product_id":"copy-of-c-a-technologies-resin-casting-10-gallon-pressure-tank","title":"C.A. Technologies Resin Casting 10 Gallon Pressure Tank","description":"\u003cp\u003eThe non-ASME, resin casting (mold) pressure tank from C.A. Technologies comes configured with a single air pressure regulator and No pickup tube. The pressure pot is available in 2.5, 5, 10, 15 and 20 gallon sizes and is constructed of a heavy gauge steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 gallon tank (inside diameter is 12.5” and inside depth is 21.5”)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003eTop outlet tank\u003c\/li\u003e\n\u003cli\u003eSingle air pressure regulator\u003c\/li\u003e\n\u003cli\u003eNo pickup tube (pickup tube has been removed for casting applications)\u003c\/li\u003e\n\u003cli\u003eIncludes casters for the tank\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003e3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003cli\u003eFlat bottom tank\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet-up Information: \u003c\/strong\u003eWhen installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12\" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_551-552-557-558_Part_Sheet.pdf?4083755064736531275\" style=\"color: #0000ff; text-decoration: underline;\" target=\"_blank\"\u003e\u003cspan class=\"s1\"\u003e10 Gallon Resin Casting Pressure Tank (51-551C) Part Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":30946384329,"sku":"X00012187","price":1286.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-551_19ca9599-0814-4d8e-9945-3390b8539150.JPG?v=1521149731"},{"product_id":"copy-of-c-a-technologies-resin-casting-15-gallon-pressure-tank","title":"C.A. Technologies Resin Casting 15 Gallon Pressure Tank","description":"\u003cp\u003eThe non-ASME, resin casting (mold) pressure tank from C.A. Technologies comes configured with a single air pressure regulator and No pickup tube. The pressure pot is available in 2.5, 5, 10, 15 and 20 gallon sizes and is constructed of a heavy gauge steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 gallon tank (inside diameter is 14.5” and inside depth is 21.5”)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003eTop outlet tank\u003c\/li\u003e\n\u003cli\u003eSingle air pressure regulator\u003c\/li\u003e\n\u003cli\u003eNo pickup tube (pickup tube has been removed for casting applications)\u003c\/li\u003e\n\u003cli\u003eIncludes casters for the tank\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003e3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003cli\u003eFlat bottom tank\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet-up Information: \u003c\/strong\u003eWhen installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12\" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_701-702_Part_Sheet.pdf?15462122130066186484\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003cstrong\u003e\u003cspan class=\"s1\" style=\"color: #0000ff;\"\u003e15 Gallon Resin Casting Pressure Tank (51-701C) Part Sheet\u003c\/span\u003e\u003c\/strong\u003e \u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":30946408329,"sku":"X00012203","price":1671.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-701_b5fab9c6-759e-467c-913b-d912eefadebf.JPG?v=1481124874"},{"product_id":"c-a-technologies-2-5-gallon-paint-pressure-tank-bottom-outlet","title":"C.A. Technologies 2.5 Gallon Paint Pressure Tank - Bottom Outlet","description":"\u003cp\u003eThe 2.5 gallon, non-ASME, bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-211) or dual regulators (51-212) and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet pressure tanks are available. Please refer to item numbers 51-201 (single regulator) or 51-202 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_210-211-212_Part_Sheet_f8ad0786-ff44-49b5-ac02-0d848d5ea39c.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e2.5 Gallon Paint Pressure Tank – Bottom Outlet (51-211 \u0026amp; 51-212) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-211)","offer_id":29464928073,"sku":"X00042700","price":777.17,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-212)","offer_id":29464928137,"sku":"51-212","price":829.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-211.JPG?v=1484677060"},{"product_id":"c-a-technologies-2-5-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer-bottom-outlet","title":"C.A. Technologies 2.5 Gallon Paint Pressure Tank - Bottom Outlet with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 2.5 gallon, non-ASME, bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-213) or dual regulators (51-214) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of a heavy gage steel \u003c\/span\u003ewith a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet pressure tanks are available. Please refer to item numbers 51-203 (single regulator) or 51-204 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_213-214-215_Part_Sheet_1b9a632a-b22f-48f9-9c3f-f0a0bdbfc95f.pdf?5509982547428107213\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003cstrong style=\"color: #0000ff; text-decoration: underline;\"\u003e2.5 Gallon Paint Pressure Tank – Bottom Outlet with Pneumatic Agitation (51-213 \u0026amp; 51-214) Part Sheet\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"#temp_created_link\"\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e \u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-213)","offer_id":29464985033,"sku":"X00044527","price":1414.98,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-214)","offer_id":29464985097,"sku":"X00042701","price":1435.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-213.JPG?v=1484677379"},{"product_id":"c-a-technologies-5-gallon-paint-pressure-tank-bottom-outlet","title":"C.A. Technologies 5 Gallon Paint Pressure Tank – Bottom Outlet","description":"\u003cp\u003eThe 5 gallon, non-ASME, bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-511) or dual regulators (51-512) and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  5 Gallon Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet pressure tanks are available. Please refer to item numbers 51-507 (single regulator) or 51-508 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_510-511-512_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e5 Gallon Paint Pressure Tank – Bottom Outlet (51-511 \u0026amp; 51-512) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-511)","offer_id":29795038089,"sku":"X00042746","price":1202.09,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-512)","offer_id":29795038153,"sku":"51-512","price":1204.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-511.JPG?v=1485376900"},{"product_id":"c-a-technologies-5-gallon-paint-pressure-tank-bottom-outlet-1","title":"C.A. Technologies 5 Gallon Paint Pressure Tank - Bottom Outlet with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 5 gallon, non-ASME, bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-514) or dual regulators (51-515) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of a heavy gage steel \u003c\/span\u003ewith a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  5 Gallon Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet pressure tanks are available. Please refer to item numbers 51-503 (single regulator) or 51-504 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_513-514-515_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e5 Gallon Paint Pressure Tank – Bottom Outlet with Pneumatic Agitation (51-514 \u0026amp; 51-515) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-514)","offer_id":29798602441,"sku":"X00044549","price":1825.32,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-515-P)","offer_id":29798602505,"sku":"X00044511","price":1944.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-514.JPG?v=1485384263"},{"product_id":"c-a-technologies-10-gallon-paint-pressure-tank","title":"C.A. Technologies 10 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe 10 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-551) or dual regulators (51-552) and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for the 10 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel inner liner (part number 51-539SS) and stainless steel pick-up tube (part number 7550-56SS) are also available.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-561 (single regulator) or 51-562 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_551-552-557-558_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e10 Gallon Paint Pressure Tank (51-561 \u0026amp; 51-562) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-551)","offer_id":29899591305,"sku":"X00042760","price":1358.36,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-552)","offer_id":29899591369,"sku":"X00042762","price":1438.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-551_002eca02-787c-4a50-8674-16f7277bfda6.JPG?v=1485543144"},{"product_id":"c-a-technologies-10-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"C.A. Technologies 10 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 10 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-553) or dual regulators (51-554) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for the 10 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel inner liner (part number 51-539SS) and stainless steel pick-up tube (part number 7550-56SS) are also available.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-564 (single regulator) or 51-565 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_553-554_Part_Sheet.pdf?11486506702566867862\" style=\"color: #0000ff;\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e10 Gallon Paint Pressure Tank (51-553 \u0026amp; 51-554) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-553)","offer_id":29900756105,"sku":"X00042763","price":2081.22,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-554)","offer_id":29900756169,"sku":"51-554","price":2121.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-553_b60f16a3-c198-4982-9c0e-f9aa870f4cde.JPG?v=1488571414"},{"product_id":"c-a-technologies-10-gallon-paint-pressure-tank-bottom-outlet","title":"C.A. Technologies 10 Gallon Paint Pressure Tank – Bottom Outlet","description":"\u003cp\u003eThe 10 gallon, non-ASME, bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-561) or dual regulators (51-562) and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet pressure tanks are available. Please refer to item numbers 51-551 (single regulator) or 51-552 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_560-561-562_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff; text-decoration: underline;\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e10 Gallon Paint Pressure Tank – Bottom Outlet (51-561 \u0026amp; 51-562) Part Sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-561)","offer_id":29901658633,"sku":"51-561","price":1549.55,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-562)","offer_id":29901658697,"sku":"51-562","price":1594.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-561.JPG?v=1485547518"},{"product_id":"c-a-technologies-10-gallon-paint-pressure-tank-bottom-outlet-with-pneumatic-agitation-mixer","title":"C.A. Technologies 10 Gallon Paint Pressure Tank - Bottom Outlet with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 10 gallon, non-ASME, bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-564) or dual regulators (51-565) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of a heavy gage steel \u003c\/span\u003ewith a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet pressure tanks are available. Please refer to item numbers 51-553 (single regulator) or 51-554 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_563-564-565_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff;\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003e5 Gallon Paint Pressure Tank – Bottom Outlet with Pneumatic Agitation (51-564 \u0026amp; 51-565) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-564)","offer_id":29901924425,"sku":"51-564","price":2190.7,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-565)","offer_id":29901924489,"sku":"51-565","price":2238.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-564.JPG?v=1485548060"},{"product_id":"c-a-technologies-15-gallon-paint-pressure-tank","title":"C.A. Technologies 15 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe 15 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies comes configured with either single (51-701) or dual regulators (51-702) and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for the 15 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack). An optional stainless steel liner (part number 51-739SS) and stainless steel pick-up tube (part number 7550-56SS) are also available).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_701-702_Part_Sheet.pdf?11486506702566867862\" style=\"color: #0000ff;\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e15 Gallon Paint Pressure Tank (51-701 \u0026amp; 51-702) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-701-P)","offer_id":30111279241,"sku":"X00042781","price":1721.24,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-702)","offer_id":30111279305,"sku":"51-702","price":1781.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-701_e1241bd0-99d6-4217-89e1-f7867f918ff9.JPG?v=1485966436"},{"product_id":"c-a-technologies-15-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"C.A. Technologies 15 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 15 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-703) or dual regulators (51-704) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for the 15 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack). An optional stainless steel liner (part number 51-739SS) and stainless steel pick-up tube (part number 7550-56SS) are also available).   \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_703-704_Part_Sheet.pdf?11486506702566867862\" style=\"color: #0000ff;\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e15 Gallon Paint Pressure Tank (51-703 \u0026amp; 51-704) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-703)","offer_id":30111598409,"sku":"51-703","price":2553.69,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-704)","offer_id":30111598473,"sku":"51-704","price":2643.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-703_11a7b607-a69c-4578-a10e-d2bd162a2cb8.JPG?v=1488571461"},{"product_id":"performance-series-2-5-gallon-paint-pressure-tank","title":"Performance Series 2.5 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe Performance Series 2.5 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that rigid liners are available under item number PLB-1175 (These liners are the correct depth, but are 12” in diameter which is slightly undersized).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel pick-up tube is available under part number 7540-56SS.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cem\u003e Please feel free to contact us for any repair parts.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30120745353,"sku":"X00043133","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7535W.4.jpg?v=1488572446"},{"product_id":"performance-series-2-5-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"Performance Series 2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 2.5 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eIncludes removable aluminum tank liner\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that rigid liners are available under item number PLB-1175 (These liners are the correct depth, but are 12” in diameter which is slightly undersized).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel pick-up tube is available under part number 7540-56SS.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cem\u003e Please feel free to contact us for any repair parts.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30167680585,"sku":"X00043124","price":922.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7535A.1.jpg?v=1488572768"},{"product_id":"performance-series-5-gallon-paint-pressure-tank","title":"Performance Series 5 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe Performance Series 5 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 5 gallon pails will fit inside the tank\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that rigid liners are available under item number PLB-1108 (These liners are the correct depth, but are 12” in diameter which is slightly undersized).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIf you would rather use a bag liner please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel pick-up tube is available under part number 7540-56SS.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30172516937,"sku":"X00043134","price":835.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7540.15.jpg?v=1488571537"},{"product_id":"performance-series-5-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"Performance Series 5 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 5 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 5 gallon pails will fit inside the tank\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for this agitated tank.  Please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel pick-up tube is available under part number 7540-56SS.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30174671241,"sku":"X00043136","price":1387.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7540A.1_f6a99ac5-fde7-4b9e-aff7-f012439d9a22.jpg?v=1488818296"},{"product_id":"performance-series-5-gallon-paint-pressure-tank-with-manual-agitation-mixer","title":"Performance Series 5 Gallon Paint Pressure Tank with Manual Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 5 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and manual agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e                   \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 5 gallon pails will fit inside the tank\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eManual agitation (hand agitation mixer)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for this agitated tank.  Please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eAn optional stainless steel pick-up tube is available under part number 7540-56SS.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30175212553,"sku":"7540M","price":1018.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7540.10_0eb66b7d-5baa-42c0-9896-9ac496837542.jpg?v=1488572207"},{"product_id":"performance-series-10-gallon-paint-pressure-tank","title":"Performance Series 10 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe Performance Series 10 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eDual regulators \u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for the 10 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).  Additional stainless steel inner liners (part number 51-539SS) are available as well as a stainless steel pick-up tube (part number 7550-56SS)).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30182315401,"sku":"X00043139","price":1045.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7550.1.jpg?v=1488818555"},{"product_id":"performance-series-10-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"Performance Series 10 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 10 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eDual mixing blades\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for the 10 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).  Additional stainless steel inner liners (part number 51-539SS) are available as well as a stainless steel pick-up tube (part number 7550-56SS)).  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30182563209,"sku":"7550A","price":1561.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7550A.2.jpg?v=1488818703"},{"product_id":"performance-series-10-gallon-paint-pressure-tank-with-manual-agitation-mixer","title":"Performance Series 10 Gallon Paint Pressure Tank with Manual Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 10 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and manual agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e                   \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003eManual agitation (hand agitation mixer)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003ePlease note that bag liners are available for the 10 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).  Additional stainless steel inner liners (part number 51-539SS) are available as well as a stainless steel pick-up tube (part number 7550-56SS).  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30183917257,"sku":"X00043142","price":1334.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/7550M_Pro-TekLogo.jpg?v=1687186346"},{"product_id":"performance-series-15-gallon-paint-pressure-tank","title":"Performance Series 15 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe Performance Series 15 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e                                                \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for the 15 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack). Additional stainless steel liners are available (part number 51-739SS) as well as a stainless steel pick-up tube (part number 7550-56SS)).  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30184755593,"sku":"X00043143","price":1413.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7560.1.jpg?v=1489511120"},{"product_id":"c-a-technologies-15-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer-1","title":"Performance Series 15 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 15 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e                \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 21.5”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eDual mixing blades\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that bag liners are available for the 15 gallon tanks, please reference 51-543-10 (10 pack) or 51-543-100 (100 pack). Additional stainless steel liners are available (part number 51-739SS) as well as a stainless steel pick-up tube (part number 7550-56SS)).  \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30184877257,"sku":"X00079377","price":2198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7560A.1.jpg?v=1491926848"},{"product_id":"performance-series-20-gallon-paint-pressure-tank","title":"Performance Series 20 Gallon Paint Pressure Tank","description":"\u003cp\u003eThe Performance Series 20 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and No pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 25.5”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca style=\"text-decoration: underline;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/7570_20_Gallon_Performance_Series_Pressure_Tak_Part_Sheet.pdf?v=1725892805\" title=\"20 Gallon Paint Pressure Tank (7570) - Part Sheet\" rel=\"noopener\" target=\"_blank\"\u003e20 Gallon Paint Pressure Tank (7570) - Part Sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003ePlease note that an optional stainless steel pick-up tube (part number 7570-56SS) is available.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30403155081,"sku":"X00043146","price":2535.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7560.1_616a5fbb-e6e7-4c02-9563-84cb11678f96.jpg?v=1574786216"},{"product_id":"performance-series-20-gallon-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"Performance Series 20 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 20 gallon, non-ASME, pressure tank (pressure pot) comes configured with dual regulators and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003eThe tank is constructed of \u003c\/span\u003eheavy gage steel with a baked on enamel finish \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 25.5”\u003c\/li\u003e\n\u003cli\u003eDual regulators\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eDual mixing blades\u003c\/li\u003e\n\u003cli\u003eGalvanized steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener\" title=\"20 Gallon Paint Pressure Tank (7570A) - Part Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/7570_20_Gallon_Performance_Series_Pressure_Tak_Part_Sheet.pdf?v=1725892805\" target=\"_blank\"\u003e\u003cstrong style=\"color: rgb(43, 0, 255); text-decoration: underline;\"\u003e20 Gallon Paint Pressure Tank (7570A) - Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003ePlease note that an optional stainless steel pick-up tube (part number 7570-56SS) is also available.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.\u003c\/p\u003e\n\u003cp\u003eCoatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid.  When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.\u003c\/p\u003e\n\u003cp\u003eAluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30403257993,"sku":"X00043148","price":2895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7560A.1_9c6514a4-0bce-47bf-9dbf-91f56d6846fe.jpg?v=1574786365"},{"product_id":"performance-series-resin-casting-20-gallon-pressure-tank","title":"Performance Series Resin Casting 20 Gallon Pressure Tank","description":"\u003cp\u003eThe Performance Series non-ASME, resin casting (mold) pressure tank comes configured with a single air pressure regulator and No pickup tube. The pressure pot is available in 2.5, 5, 10, 15 and 20 gallon sizes and is constructed of a heavy gauge steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20 gallon tank (inside diameter is 14.5” and inside depth is 25.5”)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003eTop outlet tank\u003c\/li\u003e\n\u003cli\u003eSingle air pressure regulator\u003c\/li\u003e\n\u003cli\u003eNo pickup tube (pickup tube has been removed for casting applications)\u003c\/li\u003e\n\u003cli\u003eIncludes removable stainless steel tank liner\u003c\/li\u003e\n\u003cli\u003eIncludes casters for the tank\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003e3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003cli\u003eFlat bottom tank\u003c\/li\u003e\n\u003cli\u003eQuick disconnects and caps are included\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSet-up Information - When installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12\" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.\u003c\/p\u003e\n\u003cp\u003e*(Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30945673353,"sku":"X00012179","price":2167.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/AFS-1617.1.jpg?v=1489511767"},{"product_id":"performance-series-resin-casting-15-gallon-pressure-tank","title":"Performance Series Resin Casting 15 Gallon Pressure Tank","description":"\u003cp\u003eThe Performance Series non-ASME, resin casting (mold) pressure tank comes configured with a single air pressure regulator and No pickup tube. The pressure pot is available in 2.5, 5, 10, 15 and 20 gallon sizes and is constructed of a heavy gauge steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 gallon tank (inside diameter is 14.5” and inside depth is 21.5”)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003eTop outlet tank\u003c\/li\u003e\n\u003cli\u003eSingle air pressure regulator\u003c\/li\u003e\n\u003cli\u003eNo pickup tube (pickup tube has been removed for casting applications)\u003c\/li\u003e\n\u003cli\u003eIncludes casters for the tank\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003e3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003cli\u003eFlat bottom tank\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick disconnects and caps are included\u003c\/span\u003e\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet-up Information: \u003c\/strong\u003eWhen installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12\" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Default Title","offer_id":30946242761,"sku":"X00012178","price":1664.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/AFS-1616.1.jpg?v=1489511736"},{"product_id":"copy-of-c-a-technologies-resin-casting-2-5-gallon-pressure-tank","title":"C.A. Technologies Resin Casting 2.5 Gallon Pressure Tank","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCheck out the \u003cspan style=\"text-decoration: underline;\"\u003eNEW\u003c\/span\u003e Finish Systems Exclusive 2.5 gallon resin casting (mold) pressure tank from C.A. Technologies!\u003c\/span\u003e \u003c\/strong\u003eThe tank lid has been reconfigured for a simple and sleek design that has less clutter and is more tailored to a resin casting application.  All unneeded fittings have been removed for a straight forward, simple approach to using the pressure tank which is perfect for beginners and veterans to resin casting.  This non-ASME pressure tank comes configured with a single air pressure regulator with ball valve below and the pickup tube and fluid outlet fittings have been removed. The resin pressure pot is constructed of a heavy gauge steel with wheels for maneuverability or optional stationary feet.  \u003cspan\u003e(Replaces previous tank versions 51-201C and AFS-1630).  \u003c\/span\u003eOther resin casting tanks \u003cspan\u003eavailable in 5, 10, 15 and 20 gallon sizes. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.5 gallon tank (inside diameter is 10.5” and inside depth is 8.75”)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.5 gallon size\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum pressure rating of 80 psi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExclusive resin casting pressure tank configuration\u003c\/li\u003e\n\u003cli\u003eTop outlet style tank\u003c\/li\u003e\n\u003cli\u003eSingle air pressure regulator (ball valve included)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNo pickup tube and fluid outlet fitting (they have been removed for casting applications)\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003cli\u003eFlat bottom tank\u003c\/li\u003e\n\u003cli\u003eNon-ASME rated pressure tank\u003c\/li\u003e\n\u003cli\u003eIncludes wheels or casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eIncludes wrench for tightening the wing nuts when securing the tank lid\u003c\/li\u003e\n\u003cli\u003eReplaces 51-201C and AFS-1630 pressure tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet-up Information:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eWhen installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12\" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_201-202-202SS-207_Part_Sheet.pdf?268345925728001618\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003e2.5 Gallon Resin Casting Pressure Tank (51-201C) Part Sheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593. In addition, if you are looking for a way to make cleanup easy consider a 12 pack of rigid pressure tank liners, item number 51-261-12, for your tank interior.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":32521037480014,"sku":"X00043575","price":484.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-201C-Front.jpg?v=1596631473"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/collections\/51-508_628521a6-4968-4546-93a4-50acf93da406.JPG?v=1487602681","url":"https:\/\/www.finishsystems.com\/collections\/coated-steel\/c-a-technologies.oembed","provider":"Finish Systems","version":"1.0","type":"link"}