{"title":"3M PPS Disposable Liners \u0026 Lids - By Price: Highest to Lowest","description":"","products":[{"product_id":"c-a-technologies-by-pass-regulator-gauge-for-pressure-cups-1-10-psi-52-5r2","title":"C.A. Technologies By-Pass Regulator \u0026 Gauge for Pressure Cups (0-15 psi) – (52-5R2)","description":"\u003cp\u003eThe C.A. Technologies by-pass regulator and gauge (part # 52-5R2) is ideal for any pressure feed spray guns that do not have a “ported head” as a means of pressurizing the cup.  The regulator connects to the air inlet fitting on most pressure feed spray guns (bottom of spray gun handle) and will allow for air regulation to the pressure cup while also allowing air pressure to pass through unregulated to the spray gun for atomization. \u003cstrong\u003e \u003c\/strong\u003eWe recommend 3-5 psi for most pressure cups.  (Most pressure cups will have a 10 psi maximum pressure).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBy-pass regulator \u0026amp; gauge (0-15psi)\u003c\/li\u003e\n\u003cli\u003eTubing and a one-way check valve included (pressure flow should be from the regulator to the pressure cup)\u003c\/li\u003e\n\u003cli\u003eSafety relief valve included on regulator\u003c\/li\u003e\n\u003cli\u003e¼” NPS male \u0026amp; female fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003ePlease note that this regulator will work with any aluminum or stainless steel pressure cup as well as the 3M PPS H\/O pressure cups as a means of providing and controlling the air pressure supplied.  Most pressure cups are rated to a max of 10 psi.\u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":2020688396297,"sku":"X00008540","price":135.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/52-5R2.JPG?v=1518036126"},{"product_id":"3m-pps-850-ml-28-oz-disposable-liners-lids-200-micron-filter-25-pack-16024","title":"3M PPS 850 ml (28 fl oz) Large Disposable Liners \u0026 Lids (200 Micron Filter) – 25 Pack (16024)","description":"\u003cp\u003eThe 3M PPS 850 ml (28 fl oz) large disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e850 ml (28 oz.) size - large\u003c\/li\u003e\n\u003cli\u003e200 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the large 850 ml (28 oz.) hard cup \u0026amp; collar (3M part # 16023) as well as the large 850 ml (28 oz.) H\/O pressure feed cup (3M part # 16124)\u003c\/li\u003e\n\u003cli\u003ePart Number 16024, 3M Stock # 7000045489 (Previous 3M Stock # 60455050926), UPC 00051131160248\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25 Liners\u003c\/li\u003e\n\u003cli\u003e25 Lids with (200 micron pre-welded filter)\u003c\/li\u003e\n\u003cli\u003e10 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ (PDF, 706.8 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310.0 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":21821946789966,"sku":"X00005230","price":100.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16024.png?v=1554742063"},{"product_id":"copy-of-3m-pps-850-ml-28-oz-disposable-liners-lids-200-micron-filter-25-pack-16024","title":"3M PPS 850 ml (28 fl oz) Large Disposable Liners \u0026 Lids (125 Micron Filter) – 25 Pack (16325)","description":"\u003cp\u003eThe 3M PPS 850 ml (28 fl oz) large disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e850 ml (28 fl oz) size - large\u003c\/li\u003e\n\u003cli\u003e125 micron lid filter (pre-welded filter) - blue lid\u003c\/li\u003e\n\u003cli\u003eFor use with the large 850 ml (28 fl oz) hard cup \u0026amp; collar (3M part # 16023) as well as the large 850 ml (28 oz.) H\/O pressure feed cup (3M part # 16124)\u003c\/li\u003e\n\u003cli\u003ePart Number 16325, 3M Stock # \u003cspan\u003e7100003284\u003c\/span\u003e (Previous 3M Stock # \u003cspan\u003e60455050959\u003c\/span\u003e), UPC \u003cspan\u003e00051131163256\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25 Liners\u003c\/li\u003e\n\u003cli\u003e25 Lids with (125 micron pre-welded filter - blue lid)\u003c\/li\u003e\n\u003cli\u003e10 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ (PDF, 706.8 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310.0 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":27705771786318,"sku":"X00079472","price":100.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16325.png?v=1554740899"},{"product_id":"3m-pps-650-ml-22-oz-disposable-liners-lids-200-micron-filter-50-pack-16000","title":"3M PPS 650 ml (22 fl oz) Standard Disposable Liners \u0026 Lids (200 Micron Filter) – 50 Pack (16000)","description":"\u003cp\u003eThe 3M PPS 650 ml (22 fl oz) standard disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e650 ml (22 oz.) size - standard\u003c\/li\u003e\n\u003cli\u003e200 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the standard 650 ml (22 oz.) hard cup \u0026amp; collar (3M part # 16001)\u003c\/li\u003e\n\u003cli\u003ePart Number 16000, 3M Stock # 7010029840 (Previous 3M Stock # XA012051000), UPC 00051131160002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.\u003c\/strong\u003e  \u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":27706016235598,"sku":"X00005216","price":171.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16000.jpg?v=1554744237"},{"product_id":"copy-of-3m-pps-650-ml-22-oz-disposable-liners-lids-200-micron-filter-50-pack-16000","title":"3M PPS 650 ml (22 fl oz) Standard Disposable Liners \u0026 Lids (125 Micron Filter) – 50 Pack (16301)","description":"\u003cp\u003eThe 3M PPS 650 ml (22 fl oz) standard disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e650 ml (22 fl oz) size - standard\u003c\/li\u003e\n\u003cli\u003e125 micron lid filter (pre-welded filter) - blue lid\u003c\/li\u003e\n\u003cli\u003eFor use with the standard 650 ml (22 fl oz) hard cup \u0026amp; collar (3M part # 16001)\u003c\/li\u003e\n\u003cli\u003ePart Number 16301, 3M Stock # 7010029842 (Previous 3M Stock # XA012051026), UPC 00051131163010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (125 micron pre-welded filter - blue lid)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.\u003c\/strong\u003e  \u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":27706794115150,"sku":"X00042088","price":171.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16301.png?v=1554756007"},{"product_id":"3m-pps-850-ml-28-oz-h-o-pressure-cup-large-16124","title":"3M PPS 850 ml (28 fl oz) H\/O Pressure Cup - Large (16124)","description":"\u003cp\u003e3M™ PPS™ Type H\/O Pressure Cup is a pressurized (H\/O) hard cup and collar (cover) set that supports and holds 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. This product is intended for use in place of metal cups on most pressure spray guns. Available sizes include Mini - 6 oz. and Large - 28 oz. cups. (May require pressure regulator (52-5R2) to supply cup with air pressure depending on spray gun model).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e850 ml (28 oz.) cup size – large\u003c\/li\u003e\n\u003cli\u003eFor use with the 850ml (28 oz.) large liners \u0026amp; lids (3M part #’s 16024 \u0026amp; 16325)\u003c\/li\u003e\n\u003cli\u003ePressurized hard cup – High Output (H\/O)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16124, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000119668 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455029417), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131161245\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 850ml (28 oz.) H\/O pressure cup \u0026amp; cover\u003c\/li\u003e\n\u003cli\u003e(1) Piece of tubing used to pressurize the cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e*Mix ratio inserts sold separately.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressurized hard cups and collars use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eDesigned to efficiently spray thick, high viscosity liquids and increase work speed\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Type H\/O Pressure Cup is a component set for use with the 3M™ PPS™ (Legacy) paint preparation system. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials. These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. These pressurized cups are often used as replacements for metal cups commonly found on many automotive paint spray guns. Our reusable pressurized PPS™ Type H\/O Pressure Cups excel at applying high viscosity coatings. Type H\/O cups effectively work with thick liquid materials that require pressure assist in gravity-filled delivery systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ 850ml H\/O Pressure Cup may require a pressure regulator (52-5R2) to provide pressure to the cup when used with most pressure feed spray guns.  If the spray gun has a ported head this regulator will not be needed as the tubing will connect to an air stem on the spray gun to supply the cup with air pressure.\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003e)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":28009845293134,"sku":"X00005261","price":102.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16124.jpg?v=1555623842"},{"product_id":"3m-pps-180-ml-6-oz-h-o-pressure-cup-large-16121","title":"3M PPS 180 ml (6 oz.) H\/O Pressure Cup - Mini (16121)","description":"\u003cp\u003e3M™ PPS™ Type H\/O Pressure Cup is a pressurized (H\/O) hard cup and collar (cover) set that supports and holds 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. This product is intended for use in place of metal cups on most pressure spray guns. Available sizes include Mini - 6 oz. and Large - 28 oz. cups. (May require pressure regulator (52-5R2) to supply cup with air pressure depending on spray gun model).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180 ml (6 oz.) cup size – mini\u003c\/li\u003e\n\u003cli\u003eFor use with 180ml (6 oz.) mini liners \u0026amp; lids (3M part #’s 16114 \u0026amp; 16314)\u003c\/li\u003e\n\u003cli\u003ePressurized hard cup – High Output (H\/O)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16121, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000119727 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455034680), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131161214\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 180ml (6 oz.) H\/O pressure cup \u0026amp; cover\u003c\/li\u003e\n\u003cli\u003e(1) Piece of tubing used to pressurize the cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e*Mix ratio inserts sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressurized hard cups and collars use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eDesigned to efficiently spray thick, high viscosity liquids and increase work speed\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Type H\/O Pressure Cup is a component set for use with the 3M™ PPS™ (Legacy) paint preparation system. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials. These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. These pressurized cups are often used as replacements for metal cups commonly found on many automotive paint spray guns. Our reusable pressurized PPS™ Type H\/O Pressure Cups excel at applying high viscosity coatings. Type H\/O cups effectively work with thick liquid materials that require pressure assist in gravity-filled delivery systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ 850ml H\/O Pressure Cup may require a pressure regulator (52-5R2) to provide pressure to the cup when used with most pressure feed spray guns.  If the spray gun has a ported head this regulator will not be needed as the tubing will connect to an air stem on the spray gun to supply the cup with air pressure.\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003e)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":28044677906510,"sku":"X00037562","price":60.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16121.jpg?v=1555962290"},{"product_id":"3m-pps-series-2-0-spray-cup-system-kit-large-850-ml-28-oz-disposable-liners-lids-200-micron-filter-case-of-50-26024","title":"3M PPS Series 2.0 Spray Cup System Kit – Large 850 ml (28 oz.) Disposable Liners \u0026 Lids (200 Micron Filter) – Case of 50 (26024)","description":"\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing\/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The 850 ml (28 oz.) disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS) Series 2.0.  All kits contain disposable domed lids with integrated collars and full diameter micron filters, liners, sealing plugs and a reusable hard cup.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for 3M PPS™ Series 2.0 cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e850 ml (28 oz.) size - large\u003c\/li\u003e\n\u003cli\u003e200 micron full diameter lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the large 850 ml (28 oz.) cup (26023) as well as the large 850 ml (28 oz.) H\/O pressure feed cup (26124)\u003c\/li\u003e\n\u003cli\u003ePart Number 26024, 3M Stock # 7100135961 (Previous 3M Stock # 60455090617), UPC # \u003cspan\u003e00051131260245\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)\u003c\/li\u003e\n\u003cli\u003e32 sealing plugs\u003c\/li\u003e\n\u003cli\u003e1 reusable hard cup (26023) – gravity, non-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*H\/O pressure feed reusable hard cup (26024) for use with pressure feed spray guns sold separately.  When using the H\/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H\/O cup cover.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003eNew quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading\u003c\/li\u003e\n\u003cli\u003eRedesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications\u003c\/li\u003e\n\u003cli\u003eDomed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter\u003c\/li\u003e\n\u003cli\u003eFull-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow\u003c\/li\u003e\n\u003cli\u003eA new reusable hard cup is included in every lid\/liner kit\u003c\/li\u003e\n\u003cli\u003eMixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting\/refilling easier\u003c\/li\u003e\n\u003cli\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the 3M™ PPS™ Series 2.0 Lid \u0026amp; Liner Kits contain 50 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ Series 2.0 paint preparation system only. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.)\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31787566792782,"sku":"X00006538","price":187.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26024_-_60455003503Ver2_Frontside_O.jpg?v=1581375791"},{"product_id":"3m-pps-series-2-0-spray-cup-system-kit-midi-400-ml-13-5-oz-disposable-liners-lids-200-micron-filter-case-of-50-26112","title":"3M PPS Series 2.0 Spray Cup System Kit – Midi 400 ml (13.5 oz.) Disposable Liners \u0026 Lids (200 Micron Filter) – Case of 50 (26112)","description":"\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing\/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The 400 ml (13.5 oz.) disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS) Series 2.0.  All kits contain disposable domed lids with integrated collars and full diameter micron filters, liners, sealing plugs and a reusable hard cup.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for 3M PPS™ Series 2.0 cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e400 ml (13.5 oz.) size - midi\u003c\/li\u003e\n\u003cli\u003e200 micron full diameter lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the midi 400 ml (13.5 oz.) gravity cup (26122) as well as the midi 400 ml (13.5 oz.) H\/O pressure feed cup (26121)\u003c\/li\u003e\n\u003cli\u003ePart Number 26112, 3M Stock # 7100169390 (Previous 3M Stock # 60455102305), UPC # 00051131261129\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)\u003c\/li\u003e\n\u003cli\u003e32 sealing plugs\u003c\/li\u003e\n\u003cli\u003e1 reusable hard cup (26122) – gravity, non-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*H\/O pressure feed reusable hard cup (26121) for use with pressure feed spray guns sold separately.  When using the H\/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H\/O cup cover.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003eNew quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading\u003c\/li\u003e\n\u003cli\u003eRedesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications\u003c\/li\u003e\n\u003cli\u003eDomed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter\u003c\/li\u003e\n\u003cli\u003eFull-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow\u003c\/li\u003e\n\u003cli\u003eA new reusable hard cup is included in every lid\/liner kit\u003c\/li\u003e\n\u003cli\u003eMixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting\/refilling easier\u003c\/li\u003e\n\u003cli\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 Lid \u0026amp; Liner Kits contain 50 disposable lids (Midi size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ Series 2.0 paint preparation system only. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31790349287502,"sku":"X00006546","price":138.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26112_-_60455003545Ver2_Frontside_O.jpg?v=1581437589"},{"product_id":"3m-pps-series-2-0-spray-cup-system-kit-standard-650-ml-22-oz-disposable-liners-lids-200-micron-filter-case-of-50-26000","title":"3M PPS Series 2.0 Spray Cup System Kit – Standard 650 ml (22 oz.) Disposable Liners \u0026 Lids (200 Micron Filter) – Case of 50 (26000)","description":"\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing\/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The 650 ml (22 oz.) disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS) Series 2.0.  All kits contain disposable domed lids with integrated collars and full diameter micron filters, liners, sealing plugs and a reusable hard cup.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for 3M PPS™ Series 2.0 cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e650 ml (22 oz.) size - standard\u003c\/li\u003e\n\u003cli\u003e200 micron full diameter lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the standard 650 ml (22 oz.) gravity cup (26001) as well as the large 850 ml (28 oz.) H\/O pressure feed cup (26024)\u003c\/li\u003e\n\u003cli\u003ePart Number 26000, 3M Stock # 7100134641 (Previous 3M Stock # 60455003529), UPC # 00051131260009\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)\u003c\/li\u003e\n\u003cli\u003e32 sealing plugs\u003c\/li\u003e\n\u003cli\u003e1 reusable hard cup (26001) – gravity, non-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*H\/O pressure feed reusable hard cup (26024) for use with pressure feed spray guns sold separately.  When using the H\/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H\/O cup cover.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003eNew quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading\u003c\/li\u003e\n\u003cli\u003eRedesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications\u003c\/li\u003e\n\u003cli\u003eDomed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter\u003c\/li\u003e\n\u003cli\u003eFull-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow\u003c\/li\u003e\n\u003cli\u003eA new reusable hard cup is included in every lid\/liner kit\u003c\/li\u003e\n\u003cli\u003eMixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting\/refilling easier\u003c\/li\u003e\n\u003cli\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\n\u003cp\u003e\u003cem\u003e*(Please note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 Lid \u0026amp; Liner Kits contain 50 disposable lids (Standard size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ Series 2.0 paint preparation system only. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31790401388622,"sku":"X00006533","price":157.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26000_-_60455003529Ver2_Frontside_O.jpg?v=1581438087"},{"product_id":"3m-pps-series-2-0-spray-cup-system-kit-mini-200-ml-6-8-oz-disposable-liners-lids-200-micron-filter-case-of-50-26114","title":"3M PPS Series 2.0 Spray Cup System Kit – Mini 200 ml (6.8 oz.) Disposable Liners \u0026 Lids (200 Micron Filter) – Case of 50 (26114)","description":"\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing\/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The 200 ml (6.8 oz.) disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS) Series 2.0.  All kits contain disposable domed lids with integrated collars and full diameter micron filters, liners, sealing plugs and a reusable hard cup.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for 3M PPS™ Series 2.0 cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e200 ml (6.8 oz.) size - mini\u003c\/li\u003e\n\u003cli\u003e200 micron full diameter lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the standard 200 ml (6.8 oz.) gravity cup (26115) as well as the midi 400 ml (13.5 oz.) H\/O pressure feed cup (26121)\u003c\/li\u003e\n\u003cli\u003ePart Number 26114, 3M Stock # 7100135935 (Previous 3M Stock # 60455090658), UPC # 00051131261143\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)\u003c\/li\u003e\n\u003cli\u003e32 sealing plugs\u003c\/li\u003e\n\u003cli\u003e1 reusable hard cup (26115) – gravity, non-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*H\/O pressure feed reusable hard cup (26121) for use with pressure feed spray guns sold separately.  When using the H\/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H\/O cup cover.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003eNew quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading\u003c\/li\u003e\n\u003cli\u003eRedesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications\u003c\/li\u003e\n\u003cli\u003eDomed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter\u003c\/li\u003e\n\u003cli\u003eFull-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow\u003c\/li\u003e\n\u003cli\u003eA new reusable hard cup is included in every lid\/liner kit\u003c\/li\u003e\n\u003cli\u003eMixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting\/refilling easier\u003c\/li\u003e\n\u003cli\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/multimedia.3m.com\/mws\/media\/1441117O\/3m-pps-series-2-0-now-6-ways-better.mp4\" target=\"_blank\" title=\"3M™ PPS™ Series 2.0 Now 6 Ways Better \" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e3M™ PPS™ Series 2.0 Now 6 Ways Better \u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 Lid \u0026amp; Liner Kits contain 50 disposable lids (Mini size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ Series 2.0 paint preparation system only. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31790491926606,"sku":"X00006548","price":122.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26114_-_60455003560Ver2_Frontside_O.jpg?v=1581439863"},{"product_id":"3m-pps-series-2-0-spray-cup-system-kit-micro-90-ml-3-oz-disposable-liners-lids-200-micron-filter-case-of-50-26028","title":"3M PPS Series 2.0 Spray Cup System Kit – Micro 90 ml (3 oz.) Disposable Liners \u0026 Lids (200 Micron Filter) – Case of 50 (26028)","description":"\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing\/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The 90 ml (3 oz.) disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS) Series 2.0.  All kits contain disposable domed lids with integrated collars and full diameter micron filters, liners, sealing plugs and a reusable hard cup.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for 3M PPS™ Series 2.0 cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90 ml (3 oz.) size - micro\u003c\/li\u003e\n\u003cli\u003e200 micron full diameter lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the standard 200 ml (6.8 oz.) gravity cup (26115) as well as the midi 400 ml (13.5 oz.) H\/O pressure feed cup (26121)\u003c\/li\u003e\n\u003cli\u003ePart Number 26028, 3M Stock # \u003cspan\u003e7100134640\u003c\/span\u003e (Previous 3M Stock # \u003cspan\u003e60455003586\u003c\/span\u003e), UPC # 00051131260283\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)\u003c\/li\u003e\n\u003cli\u003e32 sealing plugs\u003c\/li\u003e\n\u003cli\u003e1 reusable hard cup (26115) – gravity, non-pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*H\/O pressure feed reusable hard cup (26121) for use with pressure feed spray guns sold separately.  When using the H\/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H\/O cup cover.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003eNew quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading\u003c\/li\u003e\n\u003cli\u003eRedesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications\u003c\/li\u003e\n\u003cli\u003eDomed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter\u003c\/li\u003e\n\u003cli\u003eFull-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow\u003c\/li\u003e\n\u003cli\u003eA new reusable hard cup is included in every lid\/liner kit\u003c\/li\u003e\n\u003cli\u003eMixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting\/refilling easier\u003c\/li\u003e\n\u003cli\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"3M™ PPS™ Series 2.0 Now 6 Ways Better\" href=\"https:\/\/multimedia.3m.com\/mws\/media\/1441117O\/3m-pps-series-2-0-now-6-ways-better.mp4\" target=\"_blank\"\u003e3M™ PPS™ Series 2.0 Now 6 Ways Better \u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 Lid \u0026amp; Liner Kits contain 50 disposable lids (Micro size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ Series 2.0 paint preparation system only. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31791011528782,"sku":"X00006539","price":102.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26028_-_60455003586Ver2_Frontside_O.jpg?v=1581453567"},{"product_id":"3m-pps-series-2-0-type-h-o-pressure-cup-large-standard-850-ml-650-ml-28-oz-22-oz-26124","title":"3M PPS Series 2.0 Type H\/O Pressure Cup - Large\/Standard (850 ml\/650 ml, 28 oz.\/22 oz.) – (26124)","description":"\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M Paint Preparation System (PPS) on the disposable spray cup market.  The 3M™ PPS™ Series 2.0 Type H\/O pressure cup is a pressurized (H\/O) hard cup and collar (cover) set that supports and holds the flexible liner used in the 3M™ PPS™ Series 2.0 paint preparation system. This product contains a pressurized hard cup, collar, shroud, and hose, and enables the user to efficiently spray thick, high viscosity liquids.  The H\/O pressure cup is intended for use in place of metal cups on most pressure spray guns. Available sizes include Midi – 13.5 oz. and Large - 28 oz. cups. (May require pressure regulator (52-5R2) to supply cup with air pressure depending on spray gun model).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e850 ml (28 oz.) cup size – large\u003c\/li\u003e\n\u003cli\u003eFor use with 850ml (28 oz.) large liners \u0026amp; lids (3M part #’s 26024 \u0026amp; 26325) as well as the 6\u003cspan\u003e50ml (22 oz.) \u003c\/span\u003estandard liners \u0026amp; lids (3M part #’s 26000 \u0026amp; 26301)\u003c\/li\u003e\n\u003cli\u003ePressurized hard cup – High Output (H\/O)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26124, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100191753 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455101901), \u003cstrong\u003eUPC \u003c\/strong\u003e 00051131261242\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 850ml (28 oz.) H\/O pressure hard cup, collar \u0026amp; shroud (cover)\u003c\/li\u003e\n\u003cli\u003e(1) Piece of tubing used to pressurize the cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*3M™ PPS™ Series 2.0 adapters, liners and lids are sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressurized hard cups and collars use with 3M™ PPS™ Series 2.0 spray system\u003c\/li\u003e\n\u003cli\u003eDesigned to efficiently spray thick, high viscosity liquids\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Type H\/O Pressure Cup is a component set for use with the 3M™ PPS™ (Legacy) paint preparation system. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials. These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. These pressurized cups are often used as replacements for metal cups commonly found on many automotive paint spray guns. Our reusable pressurized PPS™ Type H\/O Pressure Cups excel at applying high viscosity coatings. Type H\/O cups effectively work with thick liquid materials that require pressure assist in gravity-filled delivery systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 Type H\/O pressure cup\u003c\/em\u003e \u003cem\u003emay require a pressure regulator (52-5R2) to provide pressure to the cup when used with most pressure feed spray guns.  If the spray gun has a ported head this regulator will not be needed as the tubing will connect to an air stem on the spray gun to supply the cup with air pressure.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31791285436494,"sku":"X00006553","price":96.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/26124-_Frontside_O.2.png?v=1700153152"},{"product_id":"3m-pps-series-2-0-type-h-o-pressure-cup-midi-mini-micro-400-ml-200-ml-90ml-13-5-oz-6-8-oz-3-oz-26121","title":"3M PPS Series 2.0 Type H\/O Pressure Cup - Midi\/Mini\/Micro (400 ml\/200 ml\/90ml, 13.5 oz.\/6.8 oz.\/3 oz.) – (26121)","description":"\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M Paint Preparation System (PPS) on the disposable spray cup market.  The 3M™ PPS™ Series 2.0 Type H\/O pressure cup is a pressurized (H\/O) hard cup and collar (cover) set that supports and holds the flexible liner used in the 3M™ PPS™ Series 2.0 paint preparation system. This product contains a pressurized hard cup, collar, shroud, and hose, and enables the user to efficiently spray thick, high viscosity liquids.  The H\/O pressure cup is intended for use in place of metal cups on most pressure spray guns. Available sizes include Midi – 13.5 oz. and Large - 28 oz. cups. (May require pressure regulator (52-5R2) to supply cup with air pressure depending on spray gun model).\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e400 ml (13.5 oz.) cup size – midi\u003c\/li\u003e\n\u003cli\u003eFor use with 400 ml (13.5 oz.) Midi liners \u0026amp; lids (3M part #’s 26112 \u0026amp; 26312), 200 ml (6.8 oz.) Mini liners \u0026amp; lids (3M part #’s 26114 \u0026amp; 26314) as well as the 90 ml (3 oz.) micro liners \u0026amp; lids (3M part #’s 26028 \u0026amp; 26328)\u003c\/li\u003e\n\u003cli\u003ePressurized hard cup – High Output (H\/O)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26121, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100202755 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455108328), \u003cstrong\u003eUPC \u003c\/strong\u003e 00051131261211\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 400 ml (13.5 oz.) H\/O pressure hard cup, collar \u0026amp; shroud (cover)\u003c\/li\u003e\n\u003cli\u003e(1) Piece of tubing used to pressurize the cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e*\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e3M™ PPS™ Series 2.0 a\u003cstrong\u003edapters, liners and lids are sold separately.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressurized hard cups and collars use with 3M™ PPS™ Series 2.0 spray system\u003c\/li\u003e\n\u003cli\u003eDesigned to efficiently spray thick, high viscosity liquids\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Type H\/O Pressure Cup is a component set for use with the 3M™ PPS™ (Legacy) paint preparation system. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials. These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. These pressurized cups are often used as replacements for metal cups commonly found on many automotive paint spray guns. Our reusable pressurized PPS™ Type H\/O Pressure Cups excel at applying high viscosity coatings. Type H\/O cups effectively work with thick liquid materials that require pressure assist in gravity-filled delivery systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 Type H\/O pressure cup\u003c\/em\u003e \u003cem\u003emay require a pressure regulator (52-5R2) to provide pressure to the cup when used with most pressure feed spray guns.  If the spray gun has a ported head this regulator will not be needed as the tubing will connect to an air stem on the spray gun to supply the cup with air pressure.\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003e)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31798149644366,"sku":"X00042354","price":58.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26121_-_20MidiH_Ocup_Frontside_O.jpg?v=1581621690"},{"product_id":"3m-pps-series-2-0-adapter-type-s18-26054","title":"3M™ PPS™ Series 2.0 Adapter – Type S18 (26054)","description":"\u003cp\u003eThe 3M™ PPS™ Series 2.0 Adapter, Type S18 is for use with the 3M™ PPS™ Series 2.0 paint preparation system H\/O Pressure Cups (400 ml (13.5 oz.) and 850 ml (28 oz.).   This adapter is compatible with many pressure feed and siphon feed spray gun models allowing the use of the 3M™ PPS™ disposable cup system. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003ePlease see a comprehensive spray gun list below before ordering to ensure compatibility.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M PPS Series 2.0 Adapter Type S18 - 3\/8” Female, 18 Thread (NPS)\u003c\/li\u003e\n\u003cli\u003eAdapter is made of stainless steel\u003c\/li\u003e\n\u003cli\u003eUsed for bottom feed (pressure feed) spray guns to connect either the 180 ml (6 oz.) or 850 ml (28 oz.) 3M H\/O Pressure Cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26054, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100135926 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455002943), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131260542\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Adapter, Type S18 (26054)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdapter converts virtually any cup spray guns into ones that work with 3M™ PPS™ Series 2.0, our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003eProvides a four-point lid-to-spray-gun connection and a wider 360° platform for stability and reliability\u003c\/li\u003e\n\u003cli\u003eStainless steel adapter offers exceptional durability and resistance to solvents\u003c\/li\u003e\n\u003cli\u003eWider bowl design makes adapter easy to clean\u003c\/li\u003e\n\u003cli\u003eAll-in-one disposable cup solution reduces chance of outside contamination, delivers consistent material transfer for improved quality and reduced paint consumption\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70%\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal\/plastic paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e3M™ PPS™ Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M™ PPS™ Series 2.0 Spray Cup System. Specifically designed adapters allow painters to use PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eCompatible Spray Gun Models for the Type S18 Adapter:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 545px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cstrong\u003eSpray Gun Manufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eAccuSpray\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eAccuSpray\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e12s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eAccuSpray\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eAccuSpray\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e19c\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eAirVerter\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eMF-3100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eAmerican Turbine\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e223xx series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eApollo\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eA5011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eApollo\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eA5125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eApollo\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eA5510\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eApollo\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eA5610\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eApollo\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eA7500 (Bottom Feed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eApollo\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eA7700 (Bottom Feed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eAsturo\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eECO\/SSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e95 SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e95 SLV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eMach 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eMach 1SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eMach 1 Featherlite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eModel 2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eModel 2001 SS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eModel 2001 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eModel 2100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eModel 7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eSV-100 Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eTrophy Series Bottom Feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eBinks\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eTrophy Touchup Series Bottom Feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCAT-Xpress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCPR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCPR-FE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L100H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eC.A. Technologies \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L200H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L300H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L100C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L200C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L300C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L100C (Multicolor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L100CM (Multicolor Touch-Up)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L100CVT (Abrasives)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLynx L100C X 1590 (Waterbourne)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eC.A.T. SLP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFE-Line Fine Finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFE-Line LCFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eC.A. Technologies\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003ePanther P100H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003ePanther P200H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003ePanther P100G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003ePanther P100G X 1590 (Waterbourne)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003ePanther P200Z (Zinc Rich)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003ePanther P200C (Corrosion Control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eTomcat T100C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\u003cspan\u003eC.A. Technologies\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eTomahawk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eMaxum Elite II Bottom Feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCS 3100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCS 5100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCS 8100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCS 9100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCS 9900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e3100H Siphon Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCAPspray \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e3100C Siphon Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCraftsman\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e9-15519\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eCraftsman\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e9-15535 Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCompact 506 siphon\/pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCompact 507\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eCompact 510 Trans Tech Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFinishline FLG4 siphon models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFinishline FLG-606\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFinishline FLG-626\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFinishline FLG-693\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFinishline FLG-694\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eGTi Millennium 620S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eJGA-510-57D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eJGA-510-57DE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eJGA-636\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eJGA-644\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eJGA-504\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eJGA-670 PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eTGHV530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eEXL 520S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eVTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\n\u003cstrong\u003eE\u003c\/strong\u003earlex\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eHV5000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eEclipse\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e8200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\n\u003cstrong\u003eF\u003c\/strong\u003euji\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eXT-2 Turbine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eGraco\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eAirPro Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eGraco\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eFinishPro HVLP Edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eHusky\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eHDS-650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eKobalt (Lowe's)\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eKC-599CS Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eLex-Aire\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003ePro Series RS bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eMechanics\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eM576DB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eMountain\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eMtn 4007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eMountain\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eMtn 4008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eOptima \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eOptima \u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e800i\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eSATA\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eLM 2000 H RP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eSATAjet\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eSharpe\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003e775 Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eSharpe\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eRazor Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eBF590 Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eBF595 Siphon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 307px;\"\u003e\n\u003cstrong\u003eW\u003c\/strong\u003eagner\u003c\/td\u003e\n\u003ctd style=\"width: 222px;\"\u003eNBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e The redesigned 3M™ PPS™ Series 2.0 Adapter converts leading commercial spray guns into ones that can use the 3M™ PPS™ Series 2.0 Spray Cup System. This  design provides four points of connection from lid-to-gun, offering improved stability and confidence during fast-paced, high-volume spraying.  3M™ PPS™ Series 2.0 is the next generation of the 3M™ PPS™ paint preparation system.  The 3M™ PPS™ system features disposable  lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0, Type S18 Adapter is for use with the 3M™ PPS™ Series 2.0 paint preparation system H\/O Pressure Cups, 400 ml (13.5 oz.) - 26121 and 850 ml (28 oz.) – 26124 for bottom feed spray guns and is compatible with the models found on the list above.  Also, the 3M™ PPS™ Series 2.0 liners and lids must be used for compatibility.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":32262134693966,"sku":"X00006541","price":30.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26054.4.jpg?v=1590604342"},{"product_id":"3m-pps-series-2-0-adapter-type-s34-26129","title":"3M™ PPS™ Series 2.0 Adapter – Type S34 (26129)","description":"\u003cp\u003eThe 3M™ PPS™ Series 2.0 Adapter, Type S34 is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups (90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.)) and the H\/O Pressure Cups (400 ml (13.5 oz.) and 850 ml (28 oz.).   This adapter is compatible with many gravity feed and spray gun models allowing the use of the 3M™ PPS™ disposable cup system. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003ePlease see a comprehensive spray gun list below before ordering to ensure compatibility.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M PPS Series 2.0 Adapter Type S34 - 3\/8” Female, 18 Thread (NPS)\u003c\/li\u003e\n\u003cli\u003eAdapter is made of stainless steel\u003c\/li\u003e\n\u003cli\u003eUsed for top feed (gravity or pressure feed) spray guns to connect either the 90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.) spray cups or the 400 ml (13.5 oz.) and 850 ml (28 oz.) 3M H\/O Pressure Cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26129, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100135938 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455003107), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131261297\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Adapter, Type S34 (26129)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdapter converts virtually any cup spray guns into ones that work with 3M™ PPS™ Series 2.0, our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003eProvides a four-point lid-to-spray-gun connection and a wider 360° platform for stability and reliability\u003c\/li\u003e\n\u003cli\u003eStainless steel adapter offers exceptional durability and resistance to solvents\u003c\/li\u003e\n\u003cli\u003eWider bowl design makes adapter easy to clean\u003c\/li\u003e\n\u003cli\u003eAll-in-one disposable cup solution reduces chance of outside contamination, delivers consistent material transfer for improved quality and reduced paint consumption\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70%\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal\/plastic paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e3M™ PPS™ Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M™ PPS™ Series 2.0 Spray Cup System. Specifically designed adapters allow painters to use PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eCompatible Spray Gun Models for the Type S34 Adapter:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"457\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"223\"\u003e\u003cstrong\u003eSpray Gun Manufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"234\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"223\"\u003eApollo\u003c\/td\u003e\n\u003ctd width=\"234\"\u003eA7500 (Top Feed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"223\"\u003eApollo\u003c\/td\u003e\n\u003ctd width=\"234\"\u003eA7700 (Top Feep)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"223\"\u003eApollo\u003c\/td\u003e\n\u003ctd width=\"234\"\u003eE7500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"223\"\u003eApollo\u003c\/td\u003e\n\u003ctd width=\"234\"\u003eE7700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"223\"\u003eJobsmart\u003c\/td\u003e\n\u003ctd width=\"234\"\u003eHVLP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e The redesigned 3M™ PPS™ Series 2.0 Adapter converts leading commercial spray guns into ones that can use the 3M™ PPS™ Series 2.0 Spray Cup System. This  design provides four points of connection from lid-to-gun, offering improved stability and confidence during fast-paced, high-volume spraying.  3M™ PPS™ Series 2.0 is the next generation of the 3M™ PPS™ paint preparation system.  The 3M™ PPS™ system features disposable  lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0, Type S34 Adapter is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups 90 ml (3 oz.) - 26115, 200 ml (6.8 oz.) - 26115, 400 ml (13.5 oz.) - 26122, 650 ml (22 oz.) - 26001 and 850 ml (28 oz.) - 26023 and the H\/O Pressure Cups, 400 ml (13.5 oz.) - 26121 and 850 ml (28 oz.) – 26124 for gravity feed (top feed) spray guns and is compatible with the models found on the list above.  Also, the 3M™ PPS™ Series 2.0 liners and lids must be used for compatibility.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":32263232290894,"sku":"X00042355","price":45.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26129-Ver2_Frontside.jpg?v=1590621433"},{"product_id":"3m-pps-series-2-0-cup-standard-650-ml-22-fl-oz-26001","title":"3M™ PPS™ Series 2.0 Cup - Standard 650 ml (22 fl oz) – Carton of 2 (26001)","description":"\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Cups are hard, reusable plastic cups designed for use with the PPS™ Series 2.0 Spray Cup System. Mixing ratios are built into each cup, eliminating the need for separate inserts. Cups are designed to work with PPS™ Series 2.0 Lids, featuring a quarter-turn locking system without the need for separate collars. A new hard cup is included in each PPS™ Series 2.0 Lid \u0026amp; Liner Kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e650 ml (22 fl oz) hard cup size – standard\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 cups per carton\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFor use with series 2.0 PPS 650ml (22 fl oz) standard liners \u0026amp; lids (3M part #’s 26000 \u0026amp; 26301)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard \u003cu data-mce-fragment=\"1\"\u003eNon-Pressurized\u003c\/u\u003e hard cup (gravity feed)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePart Number\u003c\/strong\u003e 26001, \u003cstrong data-mce-fragment=\"1\"\u003e3M Stock #\u003c\/strong\u003e 7100134653 (\u003cstrong data-mce-fragment=\"1\"\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455003651), \u003cstrong data-mce-fragment=\"1\"\u003eUPC \u003c\/strong\u003e 00051131260016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) - 650 ml (22 fl oz) standard size hard cups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHard cups designed specifically for 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExisting PPS™ red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix ratios built into every hard cup – no need for separate inserts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClear access window lets you firmly grasp the liner, making lid removal easier during tinting\/refilling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e‘Max Fill’ notation allows users to fit maximum amount of fluid in cup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOne new hard cup included in every PPS™ Series 2.0 Lid \u0026amp; Liner Kit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFull-diameter filters are built into every lid for the highest quality filtration; aides with fluid flow.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down when sealing and protecting coatings not in use to keep filters wet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReusable Hard Cups for the 3M™ PPS™ Series 2.0 Spray Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Designed specifically for 3M™ PPS™ Series 2.0 the next generation of our highest performing disposable spray cup system – PPS™ Series 2.0 Cups are hard, reusable plastic cups that support PPS™ liners during paint and fluid delivery. Mix ratios are built into the cup, eliminating the need for separate inserts. Cups accept PPS™ Series 2.0 Lids with fast, efficient quarter-turn locking systems that allow you to lock the lid securely to the cup. A clear access window makes it easy to grasp the liner through the cup, making lid removal easier during tinting and refilling. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNext Generation of the 3M™ Paint Preparation System (PPS™)\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong data-mce-fragment=\"1\"\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePlease note that with PPS Series 2.0 the collar is built into each disposable lid eliminating the need for separate collars.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39430690439246,"sku":"X00006534","price":23.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26001.png?v=1625781966"},{"product_id":"3m-pps-series-2-0-cup-mini-200-ml-6-8-fl-oz-26115","title":"3M™ PPS™ Series 2.0 Cup - Mini 200 ml (6.8 fl oz) – Carton of 2 (26115)","description":"\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Cups are hard, reusable plastic cups designed for use with the PPS™ Series 2.0 Spray Cup System. Mixing ratios are built into each cup, eliminating the need for separate inserts. Cups are designed to work with PPS™ Series 2.0 Lids, featuring a quarter-turn locking system without the need for separate collars. A new hard cup is included in each PPS™ Series 2.0 Lid \u0026amp; Liner Kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e200 ml (6.8 fl oz) hard cup size – mini\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 cups per carton\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFor use with series 2.0 PPS 200ml (6.8 fl oz) mini liners \u0026amp; lids (3M part #’s 26114 \u0026amp; 26314) as well as the 90\u003cspan data-mce-fragment=\"1\"\u003eml (3 fl oz) micro liners \u0026amp; lids (3M part #’s 26028 \u0026amp; 26328) \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMini \u003cu data-mce-fragment=\"1\"\u003eNon-Pressurized\u003c\/u\u003e hard cup (gravity feed)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePart Number\u003c\/strong\u003e 26115, \u003cstrong data-mce-fragment=\"1\"\u003e3M Stock #\u003c\/strong\u003e 7100134643 (\u003cstrong data-mce-fragment=\"1\"\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455003677), \u003cstrong data-mce-fragment=\"1\"\u003eUPC \u003c\/strong\u003e 00051131261150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) - 200 ml (6.8 fl oz) mini size hard cups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHard cups designed specifically for 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExisting PPS™ red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix ratios built into every hard cup – no need for separate inserts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClear access window lets you firmly grasp the liner, making lid removal easier during tinting\/refilling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e‘Max Fill’ notation allows users to fit maximum amount of fluid in cup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOne new hard cup included in every PPS™ Series 2.0 Lid \u0026amp; Liner Kit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFull-diameter filters are built into every lid for the highest quality filtration; aides with fluid flow.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down when sealing and protecting coatings not in use to keep filters wet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReusable Hard Cups for the 3M™ PPS™ Series 2.0 Spray Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Designed specifically for 3M™ PPS™ Series 2.0 the next generation of our highest performing disposable spray cup system – PPS™ Series 2.0 Cups are hard, reusable plastic cups that support PPS™ liners during paint and fluid delivery. Mix ratios are built into the cup, eliminating the need for separate inserts. Cups accept PPS™ Series 2.0 Lids with fast, efficient quarter-turn locking systems that allow you to lock the lid securely to the cup. A clear access window makes it easy to grasp the liner through the cup, making lid removal easier during tinting and refilling. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNext Generation of the 3M™ Paint Preparation System (PPS™)\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong data-mce-fragment=\"1\"\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePlease note that with PPS Series 2.0 the collar is built into each disposable lid eliminating the need for separate collars.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39431300841550,"sku":"X00042353","price":18.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26115.png?v=1625853861"},{"product_id":"3m-pps-series-2-0-cup-midi-400-ml-13-5-fl-oz-26122","title":"3M™ PPS™ Series 2.0 Cup - Midi 400 ml (13.5 fl oz) – Carton of 2 (26122)","description":"\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Cups are hard, reusable plastic cups designed for use with the PPS™ Series 2.0 Spray Cup System. Mixing ratios are built into each cup, eliminating the need for separate inserts. Cups are designed to work with PPS™ Series 2.0 Lids, featuring a quarter-turn locking system without the need for separate collars. A new hard cup is included in each PPS™ Series 2.0 Lid \u0026amp; Liner Kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e400 ml (13.5 fl oz) hard cup size – midi\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 cups per carton\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFor use with series 2.0 PPS 400ml (13.5 fl oz) midi liners \u0026amp; lids (3M part #’s 26112 \u0026amp; 26312) \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMidi \u003cu data-mce-fragment=\"1\"\u003eNon-Pressurized\u003c\/u\u003e hard cup (gravity feed)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePart Number\u003c\/strong\u003e 26122, \u003cstrong data-mce-fragment=\"1\"\u003e3M Stock #\u003c\/strong\u003e 7100135960 (\u003cstrong data-mce-fragment=\"1\"\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455003669), \u003cstrong data-mce-fragment=\"1\"\u003eUPC \u003c\/strong\u003e 00051131261228\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) - 400 ml (13.5 fl oz) midi size hard cups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHard cups designed specifically for 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExisting PPS™ red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix ratios built into every hard cup – no need for separate inserts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClear access window lets you firmly grasp the liner, making lid removal easier during tinting\/refilling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e‘Max Fill’ notation allows users to fit maximum amount of fluid in cup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOne new hard cup included in every PPS™ Series 2.0 Lid \u0026amp; Liner Kit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFull-diameter filters are built into every lid for the highest quality filtration; aides with fluid flow.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down when sealing and protecting coatings not in use to keep filters wet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReusable Hard Cups for the 3M™ PPS™ Series 2.0 Spray Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Designed specifically for 3M™ PPS™ Series 2.0 the next generation of our highest performing disposable spray cup system – PPS™ Series 2.0 Cups are hard, reusable plastic cups that support PPS™ liners during paint and fluid delivery. Mix ratios are built into the cup, eliminating the need for separate inserts. Cups accept PPS™ Series 2.0 Lids with fast, efficient quarter-turn locking systems that allow you to lock the lid securely to the cup. A clear access window makes it easy to grasp the liner through the cup, making lid removal easier during tinting and refilling. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNext Generation of the 3M™ Paint Preparation System (PPS™)\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong data-mce-fragment=\"1\"\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePlease note that with PPS Series 2.0 the collar is built into each disposable lid eliminating the need for separate collars.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39431330627662,"sku":"X00006552","price":22.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26122.png?v=1625856593"},{"product_id":"3m-pps-series-2-0-cup-large-850-ml-28-fl-oz-carton-of-2-26023","title":"3M™ PPS™ Series 2.0 Cup - Large 850 ml (28 fl oz) – Carton of 2 (26023)","description":"\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Cups are hard, reusable plastic cups designed for use with the PPS™ Series 2.0 Spray Cup System. Mixing ratios are built into each cup, eliminating the need for separate inserts. Cups are designed to work with PPS™ Series 2.0 Lids, featuring a quarter-turn locking system without the need for separate collars. A new hard cup is included in each PPS™ Series 2.0 Lid \u0026amp; Liner Kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e850 ml (28 fl oz) hard cup size – large\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 cups per carton\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFor use with series 2.0 PPS 850ml (28 fl oz) large liners \u0026amp; lids (3M part #’s 26024 \u0026amp; 26325) \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLarge \u003cu data-mce-fragment=\"1\"\u003eNon-Pressurized\u003c\/u\u003e hard cup (gravity feed)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePart Number\u003c\/strong\u003e 26023, \u003cstrong data-mce-fragment=\"1\"\u003e3M Stock #\u003c\/strong\u003e 7100134651 (\u003cstrong data-mce-fragment=\"1\"\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455003644), \u003cstrong data-mce-fragment=\"1\"\u003eUPC \u003c\/strong\u003e 00051131260238\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) - 850 ml (28 fl oz) midi size hard cups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHard cups designed specifically for 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExisting PPS™ red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix ratios built into every hard cup – no need for separate inserts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClear access window lets you firmly grasp the liner, making lid removal easier during tinting\/refilling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e‘Max Fill’ notation allows users to fit maximum amount of fluid in cup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOne new hard cup included in every PPS™ Series 2.0 Lid \u0026amp; Liner Kit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFull-diameter filters are built into every lid for the highest quality filtration; aides with fluid flow.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down when sealing and protecting coatings not in use to keep filters wet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReusable Hard Cups for the 3M™ PPS™ Series 2.0 Spray Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Designed specifically for 3M™ PPS™ Series 2.0 the next generation of our highest performing disposable spray cup system – PPS™ Series 2.0 Cups are hard, reusable plastic cups that support PPS™ liners during paint and fluid delivery. Mix ratios are built into the cup, eliminating the need for separate inserts. Cups accept PPS™ Series 2.0 Lids with fast, efficient quarter-turn locking systems that allow you to lock the lid securely to the cup. A clear access window makes it easy to grasp the liner through the cup, making lid removal easier during tinting and refilling. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNext Generation of the 3M™ Paint Preparation System (PPS™)\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong data-mce-fragment=\"1\"\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePlease note that with PPS Series 2.0 the collar is built into each disposable lid eliminating the need for separate collars.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39431368048718,"sku":"X00006537","price":30.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26023.png?v=1625859136"},{"product_id":"3m-pps-cup-collar-mini-180-ml-6-fl-oz-carton-of-2-16115","title":"3M™ PPS™ Cup \u0026 Collar - Mini 180 ml (6 fl oz) – Carton of 2 (16115)","description":"\u003cp\u003e3M™ PPS™ Cup \u0026amp; Collar is a hard cup and collar set that supports the 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. Sets are available in a variety of sizes including Mini - 6 oz., Midi - 13.5 oz., Standard - 22 oz. and Large - 28 oz. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180 ml (6 fl oz) hard cup size – mini\u003c\/li\u003e\n\u003cli\u003e2 cups and collars per carton\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 180ml (6 fl oz) mini liners \u0026amp; lids (3M part #’s 16114 \u0026amp; 16314) as well as the 90ml (3 fl oz) micro liners \u0026amp; lids (3M part #’s 16028 \u0026amp; 16328)\u003c\/li\u003e\n\u003cli\u003eMini \u003cu\u003eNon-Pressurized\u003c\/u\u003e hard cup and collar (gravity feed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16115, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000028417 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60980107662), \u003cstrong\u003eUPC \u003c\/strong\u003e  00051131161153\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) - 180 ml (6 fl oz) mini size hard cups and collars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard cups and collars support liners for the 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption.\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Cup \u0026amp; Collar is a component set used with the 3M™ PPS™ (Legacy) paint preparation system..These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. Our cups and collars are available in various sizes to match your needs for your paint sprayer. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\" title=\"3M PPS – Brochure\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS disposable cup system the collar is separate and only works in conjunction with the original PPS liners and lids.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39433994338382,"sku":"X00042080","price":39.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16115.png?v=1626193975"},{"product_id":"3m-pps-cup-collar-midi-400-ml-13-5-fl-oz-carton-of-2-16122","title":"3M™ PPS™ Cup \u0026 Collar - Midi 400 ml (13.5 fl oz) – Carton of 2 (16122)","description":"\u003cp\u003e3M™ PPS™ Cup \u0026amp; Collar is a hard cup and collar set that supports the 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. Sets are available in a variety of sizes including Mini - 6 oz., Midi - 13.5 oz., Standard - 22 oz. and Large - 28 oz. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e400 ml (13.5 fl oz) hard cup size – midi\u003c\/li\u003e\n\u003cli\u003e2 cups and collars per carton\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 400ml (13.5 fl oz) midi liners \u0026amp; lids (3M part #’s 16112 \u0026amp; 16312) \u003c\/li\u003e\n\u003cli\u003eMidi \u003cu\u003eNon-Pressurized\u003c\/u\u003e hard cup and collar (gravity feed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16122, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000144576 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455058382), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131161221\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) - 400 ml (13.5 fl oz) midi size hard cups and collars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard cups and collars support liners for the 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption.\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Cup \u0026amp; Collar is a component set used with the 3M™ PPS™ (Legacy) paint preparation system..These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. Our cups and collars are available in various sizes to match your needs for your paint sprayer. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS disposable cup system the collar is separate and only works in conjunction with the original PPS liners and lids.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39434070196302,"sku":"16122","price":48.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16122.png?v=1626200519"},{"product_id":"3m-pps-cup-collar-standard-650-ml-22-fl-oz-carton-of-2-16001","title":"3M™ PPS™ Cup \u0026 Collar - Standard 650 ml (22 fl oz) – Carton of 2 (16001)","description":"\u003cp\u003e3M™ PPS™ Cup \u0026amp; Collar is a hard cup and collar set that supports the 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. Sets are available in a variety of sizes including Mini - 6 oz., Midi - 13.5 oz., Standard - 22 oz. and Large - 28 oz. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e650 ml (22 fl oz) hard cup size – standard\u003c\/li\u003e\n\u003cli\u003e2 cups and collars per carton\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 650ml (22 fl oz) standard liners \u0026amp; lids (3M part #’s 16000 \u0026amp; 16301\/16300) \u003c\/li\u003e\n\u003cli\u003eStandard \u003cu\u003eNon-Pressurized\u003c\/u\u003e hard cup and collar (gravity feed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16001, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100003286 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60980108850), \u003cstrong\u003e\u003cstrong\u003eUPC \u003c\/strong\u003e\u003c\/strong\u003e00051131160019\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) - 650 ml (22 fl oz) standard size hard cups and collars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard cups and collars support liners for the 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption.\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Cup \u0026amp; Collar is a component set used with the 3M™ PPS™ (Legacy) paint preparation system..These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. Our cups and collars are available in various sizes to match your needs for your paint sprayer. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS disposable cup system the collar is separate and only works in conjunction with the original PPS liners and lids.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39434092904526,"sku":"X00042064","price":51.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16001.jpg?v=1626202132"},{"product_id":"3m-pps-cup-collar-large-850-ml-28-fl-oz-carton-of-1-16024","title":"3M™ PPS™ Cup \u0026 Collar - Large 850 ml (28 fl oz) – Carton of 1 (16023)","description":"\u003cp\u003e3M™ PPS™ Cup \u0026amp; Collar is a hard cup and collar set that supports the 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. Sets are available in a variety of sizes including Mini - 6 oz., Midi - 13.5 oz., Standard - 22 oz. and Large - 28 oz. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e850 ml (28 fl oz) hard cup size – large\u003c\/li\u003e\n\u003cli\u003e2 cups and collars per carton\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 850ml (28 fl oz) large liners \u0026amp; lids (3M part #’s 16024 \u0026amp; 16324\/16325) \u003c\/li\u003e\n\u003cli\u003eLarge \u003cu\u003eNon-Pressurized\u003c\/u\u003e hard cup and collar (gravity feed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16023, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000000642 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60980108868), \u003cstrong\u003e\u003cstrong\u003eUPC \u003c\/strong\u003e\u003c\/strong\u003e00051131160231\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) - 850 ml (28 fl oz) large size hard cup and collar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard cups and collars support liners for the 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption.\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eCup and Collars Support Liners\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Cup \u0026amp; Collar is a component set used with the 3M™ PPS™ (Legacy) paint preparation system..These items are hard plastic cups and collars that provide support for 3M™ PPS™ flexible liners. Our cups and collars are available in various sizes to match your needs for your paint sprayer. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS disposable cup system the collar is separate and only works in conjunction with the original PPS liners and lids.  Other size hard cups available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39434151264334,"sku":"X00042069","price":32.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16023.png?v=1626204128"},{"product_id":"3m-pps-series-2-0-universal-shaker-core-26458","title":"3M™ PPS™ Series 2.0 Universal Shaker Core – (26458)","description":"\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Universal Shaker Core fits on top of the domed 3M™ PPS™ 2.0 Lid and fits into the ¼-turn lid locking system, creating a stable, durable and even surface for clamping PPS™ 2.0 hard cups tightly into paint shakers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-sided design works with all PPS™ Series 2.0 hard cup sizes\u003c\/li\u003e\n\u003cli\u003eExcellent for shops where paint shakers are used\u003c\/li\u003e\n\u003cli\u003eForms durable clamping surface when placing PPS™ Series 2.0 hard cups in paint shakers\u003c\/li\u003e\n\u003cli\u003eFits with ¼-turn lid locking system for tight, reliable hold\u003c\/li\u003e\n\u003cli\u003eAbsorbs and distributes force from shaker for longer equipment life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26458, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100161512 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455091425), \u003cstrong\u003eUPC\u003c\/strong\u003e 00051131264588\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) - 3M™ PPS™ Series 2.0 Universal Shaker Core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eDesigned for Using 3M™ PPS™ Series 2.0 Hard Cups in Paint Shakers\u003c\/strong\u003e\u003cbr\u003e Excellent for using 3M™ PPS™ Series 2.0 in shops where mixing in paint shakers is common, our 3M™ PPS™ Series 2.0 Universal Shaker Core is designed specifically to work with PPS™ 2.0 Lids and reusable hard cups. Shaker cores are designed to fit on top of domed lids and to fit into the ¼-turn lid locking system, forming a tight fit to the cup and a reliable hold during the shaking process. The double-sided design works with all sizes of 3M™ PPS™ Series 2.0 hard cups. When the paint shaker is activated, the shaker core absorbs and distributes the force from the shaker through the clamps. Each side of the core makes an even and very reliable surface for clamping, and to help prevent the cup from tipping during temporary sealing and protection of paint materials.\u003cbr\u003eThis simple tool provides extra peace of mind during paint shaking and can result in longer life for reusable PPS™ Series 2.0 hard paint cups.\u003cbr\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ system has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5L1GeAfiIcw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the universal shaker core fits all 3M PPS Series 2.0 hard cups.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39434200907854,"sku":"X00042359","price":5.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26458.png?v=1626208452"},{"product_id":"3m-pps-mix-ratio-inserts-standard-650-ml-22-fl-oz-10-pack-16065","title":"3M™ PPS™ Mix Ratio Inserts - Standard 650 ml (22 fl oz) – 10 pack (16065)","description":"\u003cp\u003e3M™ PPS™ Mix Ratio Inserts help mix paint according to manufacturer guidelines for the 3M™ PPS™ (Legacy) paint preparation system. Mix ratio inserts are available for various cup sizes and manufacturers. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e650 ml (22 fl oz) mix ratio insert size – standard\u003c\/li\u003e\n\u003cli\u003e10 mix ratio inserts per pack\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 650ml (22 fl oz) standard hard cup and collar (3M part # 16001) as well as the liners \u0026amp; lids (3M part #’s 16000 \u0026amp; 16301\/16300)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16065, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000120485 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60980044246), \u003cstrong\u003eUPC\u003c\/strong\u003e 50051131160656\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(10) - 650 ml (22 fl oz) standard size mix ratio inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMix ratio inserts assist in the measuring process with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eAccurate Paint Measurement Made Faster and Easier\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Mix Ratio Inserts make it easy to mix the appropriate amount of paint for use with the 3M™ PPS™ (Legacy) paint preparation system. Mix ratios printed on the film insert take all the guesswork out of how much to use. With the insert in the cup, the measuring process is much like using a metal mix stick. You look down into the cup as ingredients are poured, making it simple to see exactly what you need. We offer a wide variety of ratio inserts customized to specific cup sizes and manufacturers.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS mix ratio inserts they go in between the hard cup and the disposable liner.  Other mix ratio inserts sizes are available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39437368950862,"sku":"X00042072","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16065.png?v=1626386109"},{"product_id":"3m-pps-mix-ratio-inserts-mini-180-ml-6-fl-oz-10-pack-16066","title":"3M™ PPS™ Mix Ratio Inserts - Mini 180 ml (6 fl oz) – 10 pack (16066)","description":"\u003cp\u003e3M™ PPS™ Mix Ratio Inserts help mix paint according to manufacturer guidelines for the 3M™ PPS™ (Legacy) paint preparation system. Mix ratio inserts are available for various cup sizes and manufacturers. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180 ml (6 fl oz) mix ratio insert size – mini\u003c\/li\u003e\n\u003cli\u003e10 mix ratio inserts per pack\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 180ml (6 fl oz) mini hard cup and collar (3M part # 16115) as well as the liners \u0026amp; lids (3M part #’s 16114 \u0026amp; 16314)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16066, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000120511 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60980107670), \u003cstrong\u003eUPC\u003c\/strong\u003e 50051131160663\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(10) - 180 ml (6 fl oz) mini size mix ratio inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMix ratio inserts assist in the measuring process with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eAccurate Paint Measurement Made Faster and Easier\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Mix Ratio Inserts make it easy to mix the appropriate amount of paint for use with the 3M™ PPS™ (Legacy) paint preparation system. Mix ratios printed on the film insert take all the guesswork out of how much to use. With the insert in the cup, the measuring process is much like using a metal mix stick. You look down into the cup as ingredients are poured, making it simple to see exactly what you need. We offer a wide variety of ratio inserts customized to specific cup sizes and manufacturers.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS mix ratio inserts they go in between the hard cup and the disposable liner.  Other mix ratio inserts sizes are available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39445078736974,"sku":"X00042073","price":6.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16066.png?v=1627075421"},{"product_id":"3m-pps-mix-ratio-inserts-midi-400-ml-13-5-fl-oz-10-pack-16155","title":"3M™ PPS™ Mix Ratio Inserts - Midi 400 ml (13.5 fl oz) – 10 pack (16155)","description":"\u003cp\u003e3M™ PPS™ Mix Ratio Inserts help mix paint according to manufacturer guidelines for the 3M™ PPS™ (Legacy) paint preparation system. Mix ratio inserts are available for various cup sizes and manufacturers. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e400 ml (13.5 fl oz) mix ratio insert size – midi\u003c\/li\u003e\n\u003cli\u003e10 mix ratio inserts per pack\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 400ml (13.5 fl oz) midi hard cup and collar (3M part # 16122) as well as the liners \u0026amp; lids (3M part #’s 16112 \u0026amp; 16312)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16155, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000045578 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455070890), \u003cstrong\u003eUPC\u003c\/strong\u003e 00051131161559\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(10) - 400 ml (13.5 fl oz) midi size mix ratio inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMix ratio inserts assist in the measuring process with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccurate Paint Measurement Made Faster and Easier\u003c\/strong\u003e\u003cbr\u003e3M™ PPS™ Mix Ratio Inserts make it easy to mix the appropriate amount of paint for use with the 3M™ PPS™ (Legacy) paint preparation system. Mix ratios printed on the film insert take all the guesswork out of how much to use. With the insert in the cup, the measuring process is much like using a metal mix stick. You look down into the cup as ingredients are poured, making it simple to see exactly what you need. We offer a wide variety of ratio inserts customized to specific cup sizes and manufacturers.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003eUnlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003ePPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003eAfter spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003eSpecifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003eBecause the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS mix ratio inserts they go in between the hard cup and the disposable liner.  Other mix ratio inserts sizes are available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39446909648974,"sku":"X00042086","price":5.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16155.png?v=1627319321"},{"product_id":"3m-pps-mix-ratio-inserts-large-850-ml-28-fl-oz-10-pack-16091","title":"3M™ PPS™ Mix Ratio Inserts - Large 850 ml (28 fl oz) – 10 pack (16091)","description":"\u003cp\u003e3M™ PPS™ Mix Ratio Inserts help mix paint according to manufacturer guidelines for the 3M™ PPS™ (Legacy) paint preparation system. Mix ratio inserts are available for various cup sizes and manufacturers. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e850 ml (28 fl oz) mix ratio insert size – large\u003c\/li\u003e\n\u003cli\u003e10 mix ratio inserts per pack\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 850ml (28 fl oz) large hard cup and collar (3M part # 16023) as well as the liners \u0026amp; lids (3M part #’s 16024 \u0026amp; 16324\/16325)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16091, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000028411 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60980045102), \u003cstrong\u003eUPC\u003c\/strong\u003e 50051131160915\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(10) - 850 ml (28 fl oz) large size mix ratio inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMix ratio inserts assist in the measuring process with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eAccurate Paint Measurement Made Faster and Easier\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Mix Ratio Inserts make it easy to mix the appropriate amount of paint for use with the 3M™ PPS™ (Legacy) paint preparation system. Mix ratios printed on the film insert take all the guesswork out of how much to use. With the insert in the cup, the measuring process is much like using a metal mix stick. You look down into the cup as ingredients are poured, making it simple to see exactly what you need. We offer a wide variety of ratio inserts customized to specific cup sizes and manufacturers.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS mix ratio inserts they go in between the hard cup and the disposable liner.  Other mix ratio inserts sizes are available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39446918398030,"sku":"X00042075","price":7.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16091.png?v=1627320356"},{"product_id":"3m-pps-mix-ratio-inserts-micro-90-ml-3-fl-oz-10-pack-16067","title":"3M™ PPS™ Mix Ratio Inserts - Micro 90 ml (3 fl oz) – 10 pack (16067)","description":"\u003cp\u003e3M™ PPS™ Mix Ratio Inserts help mix paint according to manufacturer guidelines for the 3M™ PPS™ (Legacy) paint preparation system. Mix ratio inserts are available for various cup sizes and manufacturers. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90 ml (3 fl oz) mix ratio insert size – micro\u003c\/li\u003e\n\u003cli\u003e10 mix ratio inserts per pack\u003c\/li\u003e\n\u003cli\u003eFor use with PPS 180ml (6 fl oz) mini hard cup and collar (3M part # 16115) as well as the liners \u0026amp; lids (3M part #’s 16028 \u0026amp; 16328)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16067, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7000119840 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455050173), \u003cstrong\u003eUPC\u003c\/strong\u003e 00051131160675\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Box) Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(10) - 90 ml (3 fl oz) micro size mix ratio inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMix ratio inserts assist in the measuring process with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eAccurate Paint Measurement Made Faster and Easier\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Mix Ratio Inserts make it easy to mix the appropriate amount of paint for use with the 3M™ PPS™ (Legacy) paint preparation system. Mix ratios printed on the film insert take all the guesswork out of how much to use. With the insert in the cup, the measuring process is much like using a metal mix stick. You look down into the cup as ingredients are poured, making it simple to see exactly what you need. We offer a wide variety of ratio inserts customized to specific cup sizes and manufacturers.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAdvantages of the 3M™ PPS™System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that with the original PPS mix ratio inserts they go in between the hard cup and the disposable liner.  Other mix ratio inserts sizes are available and sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39446923739214,"sku":"X00042074","price":5.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16067.png?v=1627321258"},{"product_id":"3m-pps-400-ml-13-5-oz-midi-disposable-liners-lids-200-micron-filter-50-pack-16112","title":"3M PPS 400 ml (13.5 fl oz) Midi Disposable Liners \u0026 Lids (200 Micron Filter) – 50 Pack (16112)","description":"\u003cp\u003eThe 3M PPS 400 ml (13.5 fl oz) midi disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e400 ml (13.5 fl oz) size - midi\u003c\/li\u003e\n\u003cli\u003e200 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the midi 400 ml (22 fl oz) hard cup \u0026amp; collar (3M part # 16122)\u003c\/li\u003e\n\u003cli\u003ePart Number 16112, 3M Stock # 7100020094 (Previous 3M Stock # 60455067581), UPC 00051131161122\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.\u003c\/strong\u003e  \u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39447630086222,"sku":"X00005252","price":148.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16112.jpg?v=1627392446"},{"product_id":"3m-pps-180-ml-6-fl-oz-mini-disposable-liners-lids-200-micron-filter-50-pack-16114","title":"3M PPS 180 ml (6 fl oz) Mini Disposable Liners \u0026 Lids (200 Micron Filter) – 50 Pack (16114)","description":"\u003cp\u003eThe 3M PPS 180 ml (6 fl oz) mini disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180 ml (6 fl oz) size - mini\u003c\/li\u003e\n\u003cli\u003e200 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the mini 180 ml (6 fl oz) hard cup \u0026amp; collar (3M part # 16115)\u003c\/li\u003e\n\u003cli\u003ePart Number 16114, 3M Stock # 7100054606 (Previous 3M Stock # 60455050884), UPC 00051131161146\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.\u003c\/strong\u003e  \u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39447644536910,"sku":"X00042079","price":131.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16114.png?v=1627394729"},{"product_id":"3m-pps-90-ml-3-fl-oz-micro-disposable-liners-lids-200-micron-filter-50-pack-16028","title":"3M PPS 90 ml (3 fl oz) Micro Disposable Liners \u0026 Lids (200 Micron Filter) – 50 Pack (16028)","description":"\u003cp\u003eThe 3M PPS 90 ml (3 fl oz) micro disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90 ml (3 fl oz) size - micro\u003c\/li\u003e\n\u003cli\u003e200 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the mini 180 ml (6 fl oz) hard cup \u0026amp; collar (3M part # 16115) as well as the mini 180 ml (6 fl oz) H\/O pressure feed cup (3M part # 16121)\u003c\/li\u003e\n\u003cli\u003ePart Number 16028, 3M Stock # 7000045465 (Previous 3M Stock # 60455044515), UPC 00051131160286\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (200 micron pre-welded filter)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" title=\"3M PPS – Brochure\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.\u003c\/strong\u003e  \u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39447661772878,"sku":"X00042070","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16028.png?v=1627397103"},{"product_id":"3m-pps-400-ml-13-5-fl-oz-midi-disposable-liners-lids-125-micron-filter-50-pack-16312","title":"3M PPS 400 ml (13.5 fl oz) Midi Disposable Liners \u0026 Lids (125 Micron Filter) – 50 Pack (16312)","description":"\u003cp\u003eThe 3M PPS 400 ml (13.5 fl oz) midi disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e400 ml (13.5 fl oz) size - midi\u003c\/li\u003e\n\u003cli\u003e125 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the midi 400 ml (13.5 fl oz) hard cup \u0026amp; collar (3M part # 16122)\u003c\/li\u003e\n\u003cli\u003ePart Number 16312, 3M Stock # 7100018936 (Previous 3M Stock # 60455067599), UPC 00051131163126\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (125 micron pre-welded filter - blue lid)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.\u003c\/strong\u003e  \u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39447684022350,"sku":"16312","price":148.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16312.1.png?v=1627418034"},{"product_id":"3m-pps-180-ml-6-fl-oz-mini-disposable-liners-lids-125-micron-filter-50-pack-16314","title":"3M PPS 180 ml (6 fl oz) Mini Disposable Liners \u0026 Lids (125 Micron Filter) – 50 Pack (16314)","description":"\u003cp\u003eThe 3M PPS 180 ml (6 fl oz) mini disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180 ml (6 fl oz) size - mini\u003c\/li\u003e\n\u003cli\u003e125 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the mini 180 ml (6 fl oz) hard cup \u0026amp; collar (3M part # 16115) as well as the mini 180 ml (6 fl oz) H\/O pressure feed cup (3M part # 16121)\u003c\/li\u003e\n\u003cli\u003ePart Number 16314, 3M Stock # 7000045487 (Previous 3M Stock # 60455050892), UPC 00051131163140\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (125 micron pre-welded filter)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ (PDF, 706.8 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310.0 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39447746412622,"sku":"X00005294","price":131.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16314.png?v=1627405059"},{"product_id":"3m-pps-90-ml-3-fl-oz-micro-disposable-liners-lids-125-micron-filter-50-pack-16328","title":"3M PPS 90 ml (3 fl oz) Micro Disposable Liners \u0026 Lids (125 Micron Filter) – 50 Pack (16328)","description":"\u003cp\u003eThe 3M PPS 90 ml (3 fl oz) mini disposable liner \u0026amp; lid kits are designed for use with the 3M Paint Preparation System (PPS).  All kits contain disposable lids with micron filters, liners and sealing plugs.  These kits allow the end user to stock PPS lids \u0026amp; liners efficiently and cost-effectively.  The liner \u0026amp; lid kits are available for PPS™ Cups in five sizes ranging from 90 ml – 850 ml (3 fl. oz. – 28 fl. oz.) depending on use with either the standard cup \u0026amp; collar or the H\/O Pressure Feed Cups.  With a variety of size options offered, the finisher can tackle jobs ranging from spot repairs to 4-panel repairs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90 ml (3 fl oz) size - micro\u003c\/li\u003e\n\u003cli\u003e125 micron lid filter (pre-welded filter)\u003c\/li\u003e\n\u003cli\u003eFor use with the mini 180 ml (6 fl oz) hard cup \u0026amp; collar (3M part # 16115) as well as the mini 180 ml (6 fl oz) H\/O pressure feed cup (3M part # 16121)\u003c\/li\u003e\n\u003cli\u003ePart Number 16328, 3M Stock # 7000045482 (Previous 3M Stock # 60455050108), UPC 00051131163287\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Liners\u003c\/li\u003e\n\u003cli\u003e50 Lids with (125 micron pre-welded filter)\u003c\/li\u003e\n\u003cli\u003e20 Sealing Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 3M™ PPS™ (Legacy) paint preparation system\u003c\/li\u003e\n\u003cli\u003eKits contain disposable lids with micron filters, liners and sealing plugs\u003c\/li\u003e\n\u003cli\u003eStock PPS™ Lids \u0026amp; Liners efficiently and cost-effectively\u003c\/li\u003e\n\u003cli\u003eAvailable for PPS™ Cups \u0026amp; Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs\u003c\/li\u003e\n\u003cli\u003ePPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eReduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption\u003c\/li\u003e\n\u003cli\u003ePPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eSealing plugs allow for temporary sealing and protection of non-catalyzed paint materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits for Added Efficiency with 3M™ PPS™\u003c\/strong\u003e\u003cbr\u003e Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid \u0026amp; Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for automotive waterborne paint materials; or 200 micron filters for traditional solvent-based or industrial water-base paint materials. \u003cstrong\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/strong\u003e Always reference your paint manufacturer to ensure the recommended filter to strain the material.\u003cbr\u003e \u003cbr\u003e Lids and liners are sized specifically for the range of 3M™ PPS™ Cups \u0026amp; Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Micro Size— 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups \u0026amp; Collars, ideal for spot repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Mini Size— 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups \u0026amp; Collars, excellent for 1-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Midi Size— 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups \u0026amp; Collars, great for 2-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Standard Size— 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups \u0026amp; Collars, excellent for 3-panel repairs\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ Lid \u0026amp; Liner Kit Large Size— 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups \u0026amp; Collars, ideal for 4-panel repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 3M™ PPS™ UV Standard Lid \u0026amp; Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAdvantages of the 3M™ PPS™ System\u003c\/strong\u003e\u003cbr\u003e Unlike conventional paint cup systems, our 3M™ PPS™ (PDF, 706.8 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down!\u003c\/strong\u003e\u003cbr\u003e PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up is a Breeze and Uses Less Solvent\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eA Versatile System that Works with Most Spray Guns\u003c\/strong\u003e\u003cbr\u003e Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310.0 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ is the Paint \u0026amp; Coatings Spray System of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3M PPS – Brochure\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Brochure.pdf?v=1626198658\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M PPS – Brochure\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Lid \u0026amp; Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small\u003cstrong\u003e.  \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39447763714126,"sku":"X00042089","price":111.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16328.png?v=1627408106"},{"product_id":"3m-pps-series-2-0-adapter-type-s27-26119","title":"3M™ PPS™ Series 2.0 Adapter – Type S27 (26119)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe 3M™ PPS™ Series 2.0 Adapter, Type S27 is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups (90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.)) and the H\/O Pressure Cups (400 ml (13.5 oz.) and 850 ml (28 oz.).   This adapter is compatible with many gravity feed spray gun models allowing the use of the 3M™ PPS™ disposable cup system. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease see a comprehensive spray gun list below before ordering to ensure compatibility.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M PPS Series 2.0 Adapter Type S27 – 16 mm Male (M), 1.5 mm Thread\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdapter is made of stainless steel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUsed for top feed (gravity or gravity pressure feed) spray guns to connect either the 90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.) spray cups or the 400 ml (13.5 oz.) and 850 ml (28 oz.) 3M H\/O Pressure Cups\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePart Number\u003c\/strong\u003e 26119, \u003cstrong data-mce-fragment=\"1\"\u003e3M Stock #\u003c\/strong\u003e 7100135925 (\u003cstrong data-mce-fragment=\"1\"\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455003032), \u003cstrong data-mce-fragment=\"1\"\u003eUPC \u003c\/strong\u003e00051131261198\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) Adapter, Type S27 (26119)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdapter converts virtually any cup spray guns into ones that work with 3M™ PPS™ Series 2.0, our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides a four-point lid-to-spray-gun connection and a wider 360° platform for stability and reliability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel adapter offers exceptional durability and resistance to solvents\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWider bowl design makes adapter easy to clean\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll-in-one disposable cup solution reduces chance of outside contamination, delivers consistent material transfer for improved quality and reduced paint consumption\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal\/plastic paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M™ PPS™ Series 2.0 Spray Cup System. Specifically designed adapters allow painters to use PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible Spray Gun Models for the Type S27 Adapter:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"457\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpray Gun Manufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eAstro\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eEuro Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eBinks\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eBHV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eBinks\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eSV-50 Pro Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eCAT-X Gravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eCentral Pneumatic\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eProfessional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eFinishLine Master Kit Std.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eDeVilbiss\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eStartingLine Std.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eMatco\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eMTHVLP 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eMatco\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eMTHVLP14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSharpe (Graco)\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eFinex FX1000 Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSharpe (Graco)\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eFinex FX2000 Conventional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSharpe (Graco)\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eFinex FX3000 HVLP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eBlue Point BLP10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eBlue Point BLP13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eBlue Point BLP14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eBlue Point BLP15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eBlue Point BLP16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eSnap-On\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003eBlue Point BLP18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eTranStar\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003e7713\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eTranStar\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003e7714\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"223\" data-mce-fragment=\"1\"\u003eTranStar\u003c\/td\u003e\n\u003ctd width=\"234\" data-mce-fragment=\"1\"\u003e7718\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDesigned for 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The redesigned 3M™ PPS™ Series 2.0 Adapter converts leading commercial spray guns into ones that can use the 3M™ PPS™ Series 2.0 Spray Cup System. This  design provides four points of connection from lid-to-gun, offering improved stability and confidence during fast-paced, high-volume spraying.  3M™ PPS™ Series 2.0 is the next generation of the 3M™ PPS™ paint preparation system.  The 3M™ PPS™ system features disposable  lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePlease note that the \u003c\/em\u003e\u003cem data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0, Type S27 Adapter is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups 90 ml (3 oz.) - 26115, 200 ml (6.8 oz.) - 26115, 400 ml (13.5 oz.) - 26122, 650 ml (22 oz.) - 26001 and 850 ml (28 oz.) - 26023 and the H\/O Pressure Cups, 400 ml (13.5 oz.) - 26121 and 850 ml (28 oz.) – 26124 for gravity feed (top feed) spray guns and is compatible with the models found on the list above.  Also, the 3M™ PPS™ Series 2.0 liners and lids must be used for compatibility.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":39483369947214,"sku":"X00023449","price":30.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26119.1.png?v=1631030881"},{"product_id":"3m-pps-series-2-0-adapter-type-s2c-26003","title":"3M™ PPS™ Series 2.0 Adapter – Type S2c (26003)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe 3M™ PPS™ Series 2.0 Adapter, Type S2c is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups (90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.)) and the H\/O Pressure Cups (400 ml (13.5 oz.) and 850 ml (28 oz.).   This adapter is compatible with many gravity feed spray gun models allowing the use of the 3M™ PPS™ disposable cup system. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease see a comprehensive spray gun list below before ordering to ensure compatibility.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M PPS Series 2.0 Adapter Type S2c – 16 mm Male (M), 1.5 mm Thread\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdapter is made of stainless steel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUsed for top feed (gravity or gravity pressure feed) spray guns to connect either the 90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.) spray cups or the 400 ml (13.5 oz.) and 850 ml (28 oz.) 3M H\/O Pressure Cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26003, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100135338 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455002802), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131260030\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) Adapter, Type S2c (26003)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdapter converts virtually any cup spray guns into ones that work with 3M™ PPS™ Series 2.0, our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides a four-point lid-to-spray-gun connection and a wider 360° platform for stability and reliability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel adapter offers exceptional durability and resistance to solvents\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWider bowl design makes adapter easy to clean\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll-in-one disposable cup solution reduces chance of outside contamination, delivers consistent material transfer for improved quality and reduced paint consumption\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal\/plastic paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M™ PPS™ Series 2.0 Spray Cup System. Specifically designed adapters allow painters to use PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible Spray Gun Models for the Type S2c Adapter:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable data-mce-fragment=\"1\" width=\"457\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpray Gun Manufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eADIR\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAdvantage\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e90115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAES\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAirVerter\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGG-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAmPro\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eAR6025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAstro\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eM-Star\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAstro\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eQuantum Ultra Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAstro\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eStar QUL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAsturo\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eECO\/SX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAsturo\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eECO\/S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eAsturo\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eXtreme\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eATD\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e6900 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eATD\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 258.141px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd style=\"width: 270.859px;\"\u003eCPR - Gravity Feed (Red)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eJaguar J100H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eJaguar SLP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eJaguar 100C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eJaguar 300C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eC.A. Technologies\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eTechline T3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCampbell Hausfeld\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eDH-6500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCampbell Hausfeld\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eDH-7800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCampbell Hausfeld\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eDH-7900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCAPspray\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e3100 Gravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCarQuest\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eProValue 2304-PV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCarQuest\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eProValue 2305-PV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCar Repair Solutions\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eCRS KR-808\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCentral Pneumatic\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCornwell\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003ePSG-1400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eCraftsman\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e9-15531\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eDart Products\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eAB17G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eDart Products\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eH827A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eDart Products\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eH881A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eDura-Block\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e007 Extreme Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eDura-Block\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eAF900K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eEvercraft (NAPA)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eBK7703758\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eFuji\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eT75G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eFuji\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eMPX-30 Gravity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eFuji\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLX-20 Gravity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eGoni\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e321\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eGraco\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLT200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eGraco\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLT300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eGrip\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eH827W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eGrizzly\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eH7669\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eHusky\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eHDS-780\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eHusky\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eHDS-790\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eHusky\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eHDS-890 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIngersol Rand\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e210G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIngersol Rand\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e270G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLPA-94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLPH-400 LV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLPH-400 LVB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLPH-400 LVX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eLPH-440 Primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eVX929\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eVXL949 Primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eW400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eW400LV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eIwata\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eWR-400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eJafe (Spain)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eActiva 5500G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eJet\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eJat-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eJonnesway\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eJA-6111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eKobalt (Lowe’s)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eKC-566CG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eKobalt (Lowe’s)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eKC-577HG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eKobalt (Lowe’s)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eSGY-AIR86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eKobalt (Lowe’s)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eSGY-AIR88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eMac\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eEconocoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eMac\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eSG1250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eMac\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eSG1300 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eMark I\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eAF7003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eMatco\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eMax Air\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eW98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eMSB\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eM-Star\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eNAPA (Evercraft)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e#BK7703758\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eNESCO\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e840\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eNESCO\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e868\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eNESCO\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e870\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eNikota\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eHVLP-G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003ePorter-Cable\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003ePSH-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003ePorter-Cable\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003ePSH-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003ePowerfist\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003ePR100 HVLP Gravity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003ePRO-TEK (Performance Series)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e2600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003ePRO-TEK (Performance Series)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e4000GH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003ePRO-TEK (Performance Series)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e4500XRP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003ePRO-TEK (Performance Series)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e764x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eProValue (Carquest)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e2304-PV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eProValue (Carquest)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e2305-PV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSATAjet\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSATAjet\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eB NR-92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSATAjet\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eNR-95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSharpe (Graco)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eFX-200 Conventional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSharpe (Graco)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eFX-300 HVLP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSmart (Finishmaster)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eSpray Gun Kit (Std)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSpectrum\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eProfessional SP-THE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSpectrum\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eProfessional SP-HVLP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSpitznagel\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eW2000A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSpray-It\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eStar\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSunex\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e9002A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eSunex\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e9004A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eTitan\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eVaper 1.4mm Base\/Clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eTitan\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eVaper 1.7mm Primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eTranStar\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e6613\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eTranStar\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e6614\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eTranStar\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e6617\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eTrem Pro\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eGravity Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eU-Pol\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eMaximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eWarwick\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e861-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eWarwick\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e863\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eWarwick\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e881H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eWarwick\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003e904H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 258.141px;\"\u003eWarwick\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 270.859px;\"\u003eH881W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDesigned for 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe redesigned 3M™ PPS™ Series 2.0 Adapter converts leading commercial spray guns into ones that can use the 3M™ PPS™ Series 2.0 Spray Cup System. This  design provides four points of connection from lid-to-gun, offering improved stability and confidence during fast-paced, high-volume spraying.  3M™ PPS™ Series 2.0 is the next generation of the 3M™ PPS™ paint preparation system.  The 3M™ PPS™ system features disposable  lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eA new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAfter spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBecause PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBecause the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePlease note that the \u003c\/em\u003e\u003cem data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0, Type S2c Adapter is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups 90 ml (3 oz.) - 26115, 200 ml (6.8 oz.) - 26115, 400 ml (13.5 oz.) - 26122, 650 ml (22 oz.) - 26001 and 850 ml (28 oz.) - 26023 and the H\/O Pressure Cups, 400 ml (13.5 oz.) - 26121 and 850 ml (28 oz.) – 26124 for gravity feed (top feed) spray guns and is compatible with the models found on the list above.  Also, the 3M™ PPS™ Series 2.0 liners and lids must be used for compatibility.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":44382928044336,"sku":"X00006535","price":30.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26003.png?v=1675102731"},{"product_id":"3m-pps-series-2-0-adapter-type-s40-trapezoidal-thread-26135","title":"3M™ PPS™ Series 2.0 Adapter – Type S40, Trapezoidal Thread (26135)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe 3M™ PPS™ Series 2.0 Adapter, Type S40, Trapezoidal Thread, is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups (90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.)) and the H\/O Pressure Cups (400 ml (13.5 oz.) and 850 ml (28 oz.).   This adapter is compatible with many gravity feed spray gun models allowing the use of the 3M™ PPS™ disposable cup system. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease see a comprehensive spray gun list below before ordering to ensure compatibility.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M PPS Series 2.0 Adapter Type S40 – Trapezoidal Thread\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdapter is made of stainless steel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUsed for top feed (gravity or gravity pressure feed) spray guns to connect either the 90 ml (3 oz.), 200 ml (6.8 oz.), 400 ml (13.5 oz.), 650 ml (22 oz.) and 850 ml (28 oz.) spray cups or the 400 ml (13.5 oz.) and 850 ml (28 oz.) 3M H\/O Pressure Cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26135, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100135335 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455003131), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131261358\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage (Box) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) Adapter, Type S40, Trapezoidal Thread (26135)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdapter converts virtually any cup spray guns into ones that work with 3M™ PPS™ Series 2.0, our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides a four-point lid-to-spray-gun connection and a wider 360° platform for stability and reliability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel adapter offers exceptional durability and resistance to solvents\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWider bowl design makes adapter easy to clean\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll-in-one disposable cup solution reduces chance of outside contamination, delivers consistent material transfer for improved quality and reduced paint consumption\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3M™ PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal\/plastic paint cup systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M™ PPS™ Series 2.0 Spray Cup System. Specifically designed adapters allow painters to use PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible Spray Gun Models for the Type S40, Trapezoidal Adapter:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"457\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 258.141px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpray Gun Manufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 270.859px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 258.141px;\" data-mce-fragment=\"1\"\u003eSATA\u003c\/td\u003e\n\u003ctd style=\"width: 270.859px;\" data-mce-fragment=\"1\"\u003e3000 (Series with QCC - Quick Cup Connection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 258.141px;\" data-mce-fragment=\"1\"\u003eSATA\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 270.859px;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e4000 (Series with QCC - Quick Cup Connection)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 258.141px;\" data-mce-fragment=\"1\"\u003eSATA\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 270.859px;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e5000 (Series with QCC - Quick Cup Connection)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDesigned for 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The redesigned 3M™ PPS™ Series 2.0 Adapter converts leading commercial spray guns into ones that can use the 3M™ PPS™ Series 2.0 Spray Cup System. This  design provides four points of connection from lid-to-gun, offering improved stability and confidence during fast-paced, high-volume spraying.  3M™ PPS™ Series 2.0 is the next generation of the 3M™ PPS™ paint preparation system.  The 3M™ PPS™ system features disposable  lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Material Waste by Mixing in the Cup\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003ePlease note that the \u003c\/em\u003e\u003cem data-mce-fragment=\"1\"\u003e3M™ PPS™ Series 2.0, Type S40, Trapezoidal Adapter is for use with the 3M™ PPS™ Series 2.0 paint preparation system Spray Cups 90 ml (3 oz.) - 26115, 200 ml (6.8 oz.) - 26115, 400 ml (13.5 oz.) - 26122, 650 ml (22 oz.) - 26001 and 850 ml (28 oz.) - 26023 and the H\/O Pressure Cups, 400 ml (13.5 oz.) - 26121 and 850 ml (28 oz.) – 26124 for gravity feed (top feed) spray guns and is compatible with the models found on the list above.  Also, the 3M™ PPS™ Series 2.0 liners and lids must be used for compatibility.\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":44694680011056,"sku":"X00006555","price":30.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26135.jpg?v=1678380125"},{"product_id":"3m-pps-series-2-0-h-o-pressure-cup-system-starter-kit-large-850-ml-28-oz-disposable-liners-lids-200-micron-filter-afs-1646","title":"3M PPS Series 2.0 H\/O Pressure Cup System Starter Kit – Large 850 ml (28 oz) Disposable Liners \u0026 Lids (200 Micron Filter) – (AFS-1646)","description":"\u003cp\u003eThe 3M™ PPS™ Series 2.0 H\/O Pressure Cup System Starter Kit is the next generation, highest performing disposable pressure feed spray cup system for mixing\/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The H\/O pressure cup starter kit is for use with any make or model pressure feed spray gun and proper 3M PPS adapter (sold separately).  The starter kit provides ten 850 ml (28 oz) size disposable liners \u0026amp; lids and six sealing plugs to help get any project started.  All kits contain disposable domed lids with full diameter micron filters, liners, sealing plugs and a reusable H\/O pressure hard cup with air tubing. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e3M PPS spray gun adapters and pass through cup regulators (52-5R2) are sold separately.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH\/O Pressure Cup - 850 ml (28 oz) size - large (clear hard plastic)\u003c\/li\u003e\n\u003cli\u003eFlexible air tubing\u003c\/li\u003e\n\u003cli\u003eLiners - 850 ml (28 oz) size - large\u003c\/li\u003e\n\u003cli\u003e200 micron full diameter lid filter (pre-welded filter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) - H\/O Pressure Cup (850 ml\/28 oz) with tubing - (26124)\u003c\/li\u003e\n\u003cli\u003e(10) - Liners (850 ml\/28 oz)\u003c\/li\u003e\n\u003cli\u003e(10) - Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar) – \u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003ecollars are only used with non-pressure PPS cups and can be removed for use with H\/O pressure cup\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(6) - Sealing plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*When using the H\/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H\/O cup cover.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eRedesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications\u003c\/li\u003e\n\u003cli\u003ePressurized hard cups and collars for use with 3M™ PPS™ Series 2.0 spray system\u003c\/li\u003e\n\u003cli\u003eDesigned to efficiently spray thick, high viscosity liquids\u003c\/li\u003e\n\u003cli\u003eDomed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter\u003c\/li\u003e\n\u003cli\u003eFull-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow\u003c\/li\u003e\n\u003cli\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M Paint Preparation System (PPS) on the disposable spray cup market.\u003c\/p\u003e\n\u003cp\u003eThis product contains a pressurized hard cup, collar, shroud, and hose, and enables the user to efficiently spray thick, high viscosity liquids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: disposable lids with integrated collars and full diameter filters, disposable liners, H\/O pressure feed hard cup option and sealing plugs. The 3M™ PPS™ H\/O pressure feed system features disposable lids, liners and hard plastic cups in 2 sizes: 13.5oz (400mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 H\/O Pressure Feed Spray Cup System is available in 2 sizes: 13.5 oz (400mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Series_2.0_HO_Pressure_Cup_-_Instruction_Manual.pdf?v=1700169357\" title=\"3M™ PPS™ Series 2.0 H\/O Pressure Cup - Instruction Manual\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e3M™ PPS™ Series 2.0 \u003c\/span\u003eH\/O Pressure Cup - Instruction Manual\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Series_2.0_Adapter_-_Reference_List_Spray_Gun_Manufacturer_Model_1a994fa3-450e-4c4b-99eb-c4a9c86e368c.pdf?v=1700168799\" title=\"3M™ PPS™ Series 2.0 Adapter - Reference List (Spray Gun Manufacturer \u0026amp; Model)\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e3M™ PPS™ Series 2.0\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eAdapter - Reference List (Spray Gun Manufacturer \u0026amp; Model)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 H\/O Pressure Cup Starter Kits do not include the 3M PPS 2.0 adapter or pass through cup regulator (52-5R2) which are sold separately.  Please identify the correct PPS adapter for your spray gun make and model and confirm that your pressure feed spray gun needs a special pass-through cup regulator to pressurize the cup.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":47131129905456,"sku":"X00012198","price":136.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/AFS-1646.png?v=1700165657"},{"product_id":"3m-pps-series-2-0-h-o-pressure-cup-system-starter-kit-midi-400-ml-13-5-oz-disposable-liners-lids-200-micron-filter-afs-1644","title":"3M PPS Series 2.0 H\/O Pressure Cup System Starter Kit – Midi 400 ml (13.5 oz) Disposable Liners \u0026 Lids (200 Micron Filter) – (AFS-1644)","description":"\u003cp\u003eThe 3M™ PPS™ Series 2.0 H\/O Pressure Cup System Starter Kit is the next generation, highest performing disposable pressure feed spray cup system for mixing\/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The H\/O pressure cup starter kit is for use with any make or model pressure feed spray gun and proper 3M PPS adapter (sold separately).  The starter kit provides ten 400 ml (13.5 oz) size disposable liners \u0026amp; lids and six sealing plugs to help get any project started.  All kits contain disposable domed lids with full diameter micron filters, liners, sealing plugs and a reusable H\/O pressure hard cup with air tubing. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e3M PPS spray gun adapters and pass through cup regulators (52-5R2) are sold separately.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH\/O Pressure Cup - 400 ml (13.5 oz) size - large (clear hard plastic)\u003c\/li\u003e\n\u003cli\u003eFlexible air tubing\u003c\/li\u003e\n\u003cli\u003eLiners - 400 ml (13.5 oz) size - large\u003c\/li\u003e\n\u003cli\u003e200 micron full diameter lid filter (pre-welded filter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage (Kit) includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) - H\/O Pressure Cup (400 ml\/13.5 oz) with tubing - (26121)\u003c\/li\u003e\n\u003cli\u003e(10) - Liners (400 ml\/13.5 oz)\u003c\/li\u003e\n\u003cli\u003e(10) - Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar) – \u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003ecollars are only used with non-pressure PPS cups and can be removed for use with H\/O pressure cup\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(6) - Sealing plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*When using the H\/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H\/O cup cover.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials\u003c\/li\u003e\n\u003cli\u003eSystem enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)\u003c\/li\u003e\n\u003cli\u003eRedesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications\u003c\/li\u003e\n\u003cli\u003ePressurized hard cups and collars for use with 3M™ PPS™ Series 2.0 spray system\u003c\/li\u003e\n\u003cli\u003eDesigned to efficiently spray thick, high viscosity liquids\u003c\/li\u003e\n\u003cli\u003eDomed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter\u003c\/li\u003e\n\u003cli\u003eFull-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow\u003c\/li\u003e\n\u003cli\u003eEnlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0\u003c\/li\u003e\n\u003cli\u003e3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems\u003c\/li\u003e\n\u003cli\u003eThe all-in-one solution reduces the chance of outside contamination and reduces paint consumption\u003c\/li\u003e\n\u003cli\u003eSystem delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M Paint Preparation System (PPS) on the disposable spray cup market.\u003c\/p\u003e\n\u003cp\u003eThis product contains a pressurized hard cup, collar, shroud, and hose, and enables the user to efficiently spray thick, high viscosity liquids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eThe Heart of 3M™ PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003e 3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: disposable lids with integrated collars and full diameter filters, disposable liners, H\/O pressure feed hard cup option and sealing plugs. The 3M™ PPS™ H\/O pressure feed system features disposable lids, liners and hard plastic cups in 2 sizes: 13.5oz (400mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eNext Generation of the 3M™ PPS™ Paint Preparation System\u003c\/strong\u003e\u003cbr\u003e The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing\/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCleanest Disposable Cup System\u003c\/strong\u003e\u003cbr\u003e Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eImproved Fluid Flow for More Consistent Paint Application\u003c\/strong\u003e\u003cbr\u003e Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMore Confidence in the Connection to Your Gun\u003c\/strong\u003e\u003cbr\u003e A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA System for Both Solvent-Based and Waterborne Products\u003c\/strong\u003e\u003cbr\u003e Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eUse the Right Size Cup for Every Repair\u003c\/strong\u003e\u003cbr\u003e Our PPS™ 2.0 H\/O Pressure Feed Spray Cup System is available in 2 sizes: 13.5 oz (400mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eReduce Solvent Usage by up to 70%\u003c\/strong\u003e\u003cbr\u003e After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eYour Spray Gun Functions at any Angle, Even Upside Down\u003c\/strong\u003e\u003cbr\u003e Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eReduces the Chance of Contamination Between Jobs\u003c\/strong\u003e\u003cbr\u003e Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThe Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice\u003c\/strong\u003e\u003cbr\u003e 3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Series_2.0_HO_Pressure_Cup_-_Instruction_Manual.pdf?v=1700169357\" title=\"3M™ PPS™ Series 2.0 H\/O Pressure Cup - Instruction Manual\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e3M™ PPS™ Series 2.0 \u003c\/span\u003eH\/O Pressure Cup - Instruction Manual\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_PPS_Series_2.0_Adapter_-_Reference_List_Spray_Gun_Manufacturer_Model_1a994fa3-450e-4c4b-99eb-c4a9c86e368c.pdf?v=1700168799\" title=\"3M™ PPS™ Series 2.0 Adapter - Reference List (Spray Gun Manufacturer \u0026amp; Model)\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e3M™ PPS™ Series 2.0\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eAdapter - Reference List (Spray Gun Manufacturer \u0026amp; Model)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the \u003c\/em\u003e\u003cem\u003e3M™ PPS™ Series 2.0 H\/O Pressure Cup Starter Kits do not include the 3M PPS 2.0 adapter or pass through cup regulator (52-5R2) which are sold separately.  Please identify the correct PPS adapter for your spray gun make and model and confirm that your pressure feed spray gun needs a special pass-through cup regulator to pressurize the cup.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eIMPORTANT: The 125 micron filtration liners \u0026amp; lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":47134820598064,"sku":"X00024120","price":88.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/AFS-1644.png?v=1700231686"}],"url":"https:\/\/www.finishsystems.com\/collections\/price-desc-3m-pps-disposabl\/c-a-technologies.oembed","provider":"Finish Systems","version":"1.0","type":"link"}