{"title":"Water Base - By Price: Highest to Lowest","description":"\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eH2O\u003c\/strong\u003e\u003cspan\u003e series of spray equipment from C.A.T. is designed for use with water-base coatings and also sprays solvent coatings equally as well. Within the H2O series are the H2O Bobcat Peak \u0026amp; H2O Cougar Peak 14:1 AAA pumps which have an output of .33 GPM and are for single gun use. The H2O equipment has been labeled for this application so customers will not confuse the solvent based and water based units in their shops. The H2O AAA units help reduce the sheering of materials, eliminating many of the problems associated with spraying waterborne coatings.\u003c\/span\u003e","products":[{"product_id":"c-a-technologies-h2o-bobcat-air-assist-airless-aaa-spray-gun","title":"C.A. Technologies H2O Bobcat Air Assist Airless (AAA) Spray Gun","description":"\u003cp\u003eThe C.A. Technologies H2O Bobcat Air Assist Airless (AAA) spray gun comes with a fine finish opti-tip that has a pre-orifice to help reduce the sheering of materials, eliminating many of the problems associated with spraying waterborne coatings.  It is designed for production wood and metal finishing. Features include lightweight design, stainless steel fluid passages and an integrated fluid filter. The handle is ergonomically designed to reduce fatigue and fit comfortably in any size hand. The trigger pull has been designed to be ultra-light resulting in less muscle strain and operator fatigue. An innovative trigger safety has also been integrated into the gun to provide optimum safety. The Bobcat's superior atomization is achieved with the precise geometry of the airless tip and HVLP air cap, giving you the finest finish possible.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 100 mesh inline filter\u003c\/li\u003e\n\u003cli\u003e1800 psi maximum working pressure\u003c\/li\u003e\n\u003cli\u003eAir Inlet – ¼” NPS (m)\u003c\/li\u003e\n\u003cli\u003eFluid Inlet – ¼”NPS (m)\u003c\/li\u003e\n\u003cli\u003eWeight – 17.1 oz.\u003c\/li\u003e\n\u003cli\u003eRequires 6 CFM\u003c\/li\u003e\n\u003cli\u003eThe standard tip is .011 X 40° angle, other tip sizes are available (available sizes from .007 to .013 with angles from 20° to 70°)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFine finish opti-tip that has a pre-orifice to help reduce the sheering of materials.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e100% stainless steel fluid passages, nozzle and needle makes this spray gun perfect for water based coatings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThis is an excellent atomizing spray gun that will provide a “class A” finish quality\u003c\/li\u003e\n\u003cli\u003eFast production speeds with +65% transfer efficiency making it a very efficient spray gun\u003c\/li\u003e\n\u003cli\u003eThe Bobcat provides better than 30% fan pattern width adjustment giving you added versatility on any project\u003c\/li\u003e\n\u003cli\u003eThe Bobcat is also very light weight providing you a great feel and balance in your hand\u003c\/li\u003e\n\u003cli\u003eWhen the spray gun inlet air pressure is under 24 psi the air pressure coming out of the HVLP air cap on the front of the spray gun is less than 10 psi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/Bobcat_Part_Sheet.pdf?8404596913017397840\" title=\"H2O Bobcat Air Assist Airless (AAA) - Part Sheet\" rel=\"noopener noreferrer\" style=\"color: rgb(43, 0, 255); text-decoration: underline;\" target=\"_blank\"\u003e\u003cstrong\u003eH2O Bobcat Air Assist Airless (AAA) - Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that general tip recommendations can be found in the chart below.  For safety reasons, only pair this spray gun with AAA Pumps that generate a maximum 1800 psi working pressure or less.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please review the part sheet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"409-F - (H20-B409F)","offer_id":18425941317,"sku":"H20-B409F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"511-F - (H20-B511F)","offer_id":18425941637,"sku":"H20-B511F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"611-F - (H20-B611F)","offer_id":18425941765,"sku":"X00000311","price":908.51,"currency_code":"USD","in_stock":true},{"title":"413-F - (H20-B413F)","offer_id":18425941829,"sku":"X00044319","price":908.51,"currency_code":"USD","in_stock":true},{"title":"513-F - (H20-B513F)","offer_id":18425941957,"sku":"H20-B513F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"613-F - (H20-B613F)","offer_id":18425942085,"sku":"H20-B613F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"411-F (standard) - (H20-B411F)","offer_id":18425942341,"sku":"X00043799","price":908.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/Bobcat_H2O.JPG?v=1618499524"},{"product_id":"c-a-technologies-h2o-cougar-air-assist-airless-aaa-spray-gun","title":"C.A. Technologies H2O Cougar Air Assist Airless (AAA) Spray Gun","description":"\u003cp\u003eThe C.A. Technologies H2O Cougar Air Assist Airless (AAA) spray gun comes with a fine finish opti-tip that has a pre-orifice to help reduce the sheering of materials, eliminating many of the problems associated with spraying waterborne coatings.  It is designed for production wood and metal finishing. Features include all stainless steel fluid passages, ergonomic design, integrated fluid filter and easy trigger pull.  Its superfine soft atomization is achieved with the precise geometry of the airless fluid tip and low volume air cap that mix at the locus of atomization which in turn will deliver the desired finishes at production speeds. The pump and gun system can be operated with only a small 1.5 hp compressor.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 100 mesh inline filter\u003c\/li\u003e\n\u003cli\u003e2500 psi maximum working pressure\u003c\/li\u003e\n\u003cli\u003eAir Inlet – ¼” NPS (m)\u003c\/li\u003e\n\u003cli\u003eFluid Inlet – ¼”NPS (m)\u003c\/li\u003e\n\u003cli\u003eWeight – 23 oz.\u003c\/li\u003e\n\u003cli\u003eRequires 6 CFM\u003c\/li\u003e\n\u003cli\u003eThe standard tip is .011 X 40° angle, other tip sizes are available (available sizes from .007 to .013 with angles from 20° to 70°)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% stainless steel fluid passages, nozzle and needle makes this spray gun perfect for water based coatings\u003c\/li\u003e\n\u003cli\u003eThis is an excellent atomizing spray gun that will provide a “class A” finish quality\u003c\/li\u003e\n\u003cli\u003eFast production speeds with +65% transfer efficiency making it a very efficient spray gun\u003c\/li\u003e\n\u003cli\u003eThe Cougar provides better than 30% fan pattern width adjustment giving you added versatility on any project\u003c\/li\u003e\n\u003cli\u003eThe Cougar has a very ergonomic handle design to fit comfortably in your hand\u003c\/li\u003e\n\u003cli\u003eWhen the spray gun inlet air pressure is under 24 psi the air pressure coming out of the HVLP air cap on the front of the spray gun is less than 10 psi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/Cougar_Part_Sheet.pdf?v=1618500410\" title=\"H2O Cougar Air Assist Airless (AAA) - Part Sheet\" rel=\"noopener noreferrer\" style=\"color: rgb(43, 0, 255);\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eH2O Cougar Air Assist Airless (AAA) - Part Sheet\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that general tip recommendations can be found in the chart below.  For safety reasons, only pair this spray gun with AAA Pumps that generate a maximum 2500 psi working pressure or less.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please review the part sheet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"409-F - (H20-C409F)","offer_id":18462340677,"sku":"H20-C409F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"511-F - (H20-C511F)","offer_id":18462340741,"sku":"H20-C511F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"611-F - (H20-C611F)","offer_id":18462340805,"sku":"H20-C611F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"413-F - (H20-C413F)","offer_id":18462340869,"sku":"X00037504","price":908.51,"currency_code":"USD","in_stock":true},{"title":"513-F - (H20-C513F)","offer_id":18462340933,"sku":"H20-C513F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"613-F - (H20-C613F)","offer_id":18462340997,"sku":"H20-C613F","price":908.51,"currency_code":"USD","in_stock":true},{"title":"411-F (standard) - (H20-C411F)","offer_id":18462341061,"sku":"X00043800","price":908.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/Cougar_H2O.JPG?v=1466543622"},{"product_id":"c-a-technologies-h2o-cpr-pressure-feed-spray-gun-cat-packs","title":"C.A. Technologies H2O CPR Pressure Feed Spray Gun","description":"\u003cp\u003eThe C.A. Technologies H2O CPR (CAT Pressure Reduced) pressure feed spray guns combine the transfer efficiency of HVLP with the speed and finish quality of conventional air spray. The spray gun comes equipped with an HVLP and Pressure Reduced (Compliant) air cap allowing the user to switch between the two spray technologies simply by changing the air cap, making it one of the most versatile spray guns on the market! The CPR spray gun is perfect for all general coating types as well as water-based coatings!\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003eThe CPR CAT Packs include the new CPR air cap and the HVLP air cap, along with 3 different needle and nozzle sizes (1.3 mm, 1.5 mm \u0026amp; 1.7 mm), multi-purpose wrench, nozzle wrench, cleaning brush and mini regulator. These kits will also have several pressure cup options including a 1 Qt. stainless steel cup, the popular 850 ml 3M PPS cup \u003cspan\u003e(liners and lids sold separately)\u003c\/span\u003e o\u003cspan\u003er no cup for use with an existing pressure pot or pressure tank.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003eAir Inlet - 1\/4” NPS (m)\u003c\/li\u003e\n\u003cli\u003eFluid Inlet - 3\/8 NPS (m)\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight – 20 oz.\u003c\/li\u003e\n\u003cli\u003eHVLP Air Cap (Red 23-1301) Requires 13.5 cfm @ 29 psi\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompliant Pressure Reduced Air Cap (Green 23-2101) Requires 11 cfm @ 29 psi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\"H2O\" designation on the side of the spray gun for easy identification in larger shops\u003c\/li\u003e\n\u003cli\u003eCombines HVLP transfer efficiency with the fine finish quality and speed of a conventional spray gun making for excellent atomization and a “class A” finish\u003c\/li\u003e\n\u003cli\u003e100% stainless steel fluid passages, nozzle and needle makes this spray gun perfect for water based coatings\u003c\/li\u003e\n\u003cli\u003eThe CPR spray gun has the ability to switch between HVLP and Pressure Reduced (Compliant) spray technologies simply by changing the air cap, making it one of the most versatile spray guns on the market for a wide array of coatings!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/H2O-CPR_Part_Sheet.pdf?v=1679586332\" title=\"H2O-CPR - Part Sheet\" rel=\"noopener\" style=\"color: rgb(43, 0, 255); text-decoration: underline;\" target=\"_blank\"\u003e\u003cstrong\u003eH2O-CPR - Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the repair kit for the CPR is part # 10-106.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please review the part sheet.\u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"No Cup - (H20-CPR)","offer_id":18610240261,"sku":"X00043801","price":633.35,"currency_code":"USD","in_stock":true},{"title":"1 Qt. Stainless Steel Cup - (H20-CPR-303SS-R2)","offer_id":18610240389,"sku":"X00058749","price":937.34,"currency_code":"USD","in_stock":true},{"title":"850 ml 3M PPS Cup - (H20-CPR-PPS-R2)","offer_id":18610240453,"sku":"H20-CPR-PPS-R2","price":1003.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/H2O-CPR_2012.JPG?v=1475776444"},{"product_id":"c-a-technologies-h2o-cpr-gravity-feed-reduced-pressure-rp-spray-gun","title":"C.A. Technologies H2O CPR Gravity Feed Reduced Pressure (RP) Spray Gun","description":"\u003cp\u003eThe C.A. Technologies H2O CPR (CAT Pressure Reduced) gravity feed spray guns combine the transfer efficiency of HVLP with the speed and finish quality of conventional air spray. The spray gun comes equipped with an HVLP and Pressure Reduced (Compliant) air cap allowing the user to switch between the two spray technologies simply by changing the air cap, making it one of the most versatile spray guns on the market! The CPR spray gun is available in two different kits, one for the automotive industry and one for the woodworking industry.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003eThe standard \u003cstrong\u003eCPR CAT Packs\u003c\/strong\u003e include the new CPR air cap and the HVLP air cap, along with several different needle and nozzle sizes (1.3 mm, 1.5 mm \u0026amp; 1.7 mm), multi-purpose wrench, nozzle wrench, cleaning brush, spray gun hook, and mini-regulator all contained in a handy carrying case. The kit will also have two cup options including a 700 ml aluminum cup or the popular 650 ml 3M PPS cup system \u003cspan\u003e(liners and lids sold separately).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003eAir Inlet - 1\/4” NPS (m)\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFluid Inlet – 16mm x 1.5mm (m)\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight – 20 oz.\u003c\/li\u003e\n\u003cli\u003eHVLP Air Cap (Red 23-1301) Requires 13.5 cfm @ 29 psi\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompliant Pressure Reduced Air Cap (Green 23-2101) Requires 11 cfm @ 29 psi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe spray gun will come with a “H2O” designation to help shops identify which spray guns may be in use for water base coatings\u003c\/li\u003e\n\u003cli\u003eThis H2O CPR CAT Pack will include the 1.5 mm nozzle set which is a very common setup to spray water base coatings effectively\u003c\/li\u003e\n\u003cli\u003eCombines HVLP transfer efficiency with the fine finish quality and speed of a conventional spray gun making for excellent atomization and a “class A” finish\u003c\/li\u003e\n\u003cli\u003e100% stainless steel fluid passages, nozzle and needle makes this spray gun perfect for water based coatings\u003c\/li\u003e\n\u003cli\u003eThe CPR spray gun has the ability to switch between HVLP and Pressure Reduced (Compliant) spray technologies simply by changing the air cap, making it one of the most versatile spray guns on the market for a wide array of coatings!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/H2O-CPR-G_Part_Sheet.pdf?v=1679586332\" target=\"_blank\" title=\"H2O CPR Gravity Feed (H20-CPR-G) - Part Sheet\" rel=\"noopener\"\u003eH2O CPR Gravity Feed (H20-CPR-G) - Part Sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the repair kit for the CPR is part # 10-105.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please review the part sheet.\u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"700 ml Aluminum Gravity Feed Cup - (H20-CPR-G)","offer_id":19445345861,"sku":"H20-CPR-G","price":742.62,"currency_code":"USD","in_stock":true},{"title":"650 ml 3M Gravity Feed PPS Cup - (H20-CPR-G-PPS)","offer_id":19445345925,"sku":"X00043802","price":785.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/H2O-CPR-G_w-401_2012.JPG?v=1470089543"},{"product_id":"c-a-technologies-2-5-gallon-stainless-steel-paint-pressure-tank","title":"C.A. Technologies 2.5 Gallon Stainless Steel Paint Pressure Tank","description":"\u003cp\u003eThe 2.5 gallon, stainless steel, non-ASME pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-801) or dual regulators (51-802) and No pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease note that replacement liners are available under item number SS11-75 . In addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-911 (single regulator) or 51-912 (dual regulators) for similar tank configurations in a bottom outlet tank.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_801-802_Part_Sheet_5fb8f736-309a-4e60-9d91-961f69758ea5.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e2.5 Gallon Stainless Steel Paint Pressure Tank (51-801 \u0026amp; 51-802) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-801)","offer_id":29443141641,"sku":"X00042785","price":2070.54,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-802)","offer_id":29443181577,"sku":"X00008450","price":2112.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-801.JPG?v=1491859230"},{"product_id":"c-a-technologies-2-5-gallon-stainless-steel-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"C.A. Technologies 2.5 Gallon Stainless Steel Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe 2.5 gallon stainless steel, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-803) or dual regulators (51-804) and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003eThe tank is constructed of 304 grade stainless steel \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003ePlease note that\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e replacement\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e liners are available under item number SS11-75.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-913 (single regulator) or 51-914 (dual regulators) for similar tank configurations in a bottom outlet tank.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_803-804_Part_Sheet_56ce2ea9-6dd6-4df7-bce8-b12b96d15b71.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (51-803 \u0026amp; 51-804) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-803)","offer_id":29443306057,"sku":"X00042786","price":2722.06,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-804)","offer_id":29443306185,"sku":"51-804","price":2900.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-803.JPG?v=1484606721"},{"product_id":"c-a-technologies-2-5-gallon-stainless-steel-paint-pressure-tank-bottom-outlet","title":"C.A. Technologies 2.5 Gallon Stainless Steel Paint Pressure Tank - Bottom Outlet","description":"\u003cp\u003eThe 2.5 gallon, non-ASME, stainless steel bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-911) or dual regulators (51-912). No pneumatic agitation (mixer) included with the tank. The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003cstrong style=\"font-size: 1.4em;\"\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet stainless steel pressure tanks are available. Please refer to item numbers 51-801 (single regulator) or 51-802 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_910-911-912_Part_Sheet_875f1a99-735e-44f9-a43e-e8d5185a5241.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e2.5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet (51-911 \u0026amp; 51-912) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-911)","offer_id":29464448073,"sku":"X00042792","price":2633.03,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-912)","offer_id":29464448137,"sku":"51-912","price":2693.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-911.JPG?v=1484675945"},{"product_id":"c-a-technologies-2-5-gallon-stainless-steel-paint-pressure-tank-with-pneumatic-agitation-mixer-bottom-outlet","title":"C.A. Technologies 2.5 Gallon Stainless Steel Paint Pressure Tank - Bottom Outlet with Pneumatic Agitation (mixer)","description":"\u003cp\u003eThe 2.5 gallon, non-ASME, stainless steel bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-913) or dual regulators (51-914) and\u003cspan\u003e pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003eThe tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet stainless steel pressure tanks are available. Please refer to item numbers 51-801 (single regulator) or 51-802 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_913-914-915_Part_Sheet_58ff7044-cad6-4694-a3fc-dcd2ed1c80cb.pdf?5509982547428107213\" target=\"_blank\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003e2.5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet (51-913 \u0026amp; 51-914) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-913)","offer_id":29464876809,"sku":"X00042793","price":3157.0,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-914)","offer_id":29464876873,"sku":"51-914","price":3243.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-913.JPG?v=1484676824"},{"product_id":"c-a-technologies-5-gallon-stainless-steel-paint-pressure-tank","title":"C.A. Technologies 5 Gallon Stainless Steel Paint Pressure Tank","description":"\u003cp\u003e\u003cstrong\u003eC.A. Technologies 5 Gallon Stainless Steel Paint Pressure Tank\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 5 gallon, stainless steel, non-ASME pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-851) or dual regulators (51-852) and No pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that rigid liners are available under item number PLB-1108 (These liners are the correct depth, but are 12” in diameter which is slightly undersized).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIf you would rather use a bag liner please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e   \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-921 (single regulator) or 51-922 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_851-852_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e5 Gallon Stainless Steel Paint Pressure Tank (51-851 \u0026amp; 51-852) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-851)","offer_id":29855194441,"sku":"X00042787","price":3095.08,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-852)","offer_id":29855194505,"sku":"X00037734","price":3171.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-851.JPG?v=1485457257"},{"product_id":"c-a-technologies-5-gallon-stainless-steel-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"C.A. Technologies 5 Gallon Stainless Steel Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003eThe 5 gallon, stainless steel, non-ASME pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-853) or dual regulators (51-854) and pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for this agitated tank.  Please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e   \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-923 (single regulator) or 51-924 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_853-854_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\"\u003e\u003cstrong\u003e5 Gallon Stainless Steel Paint Pressure Tank (51-853 \u0026amp; 51-854) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-853)","offer_id":29856304265,"sku":"51-853","price":3758.87,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-854)","offer_id":29856304329,"sku":"51-854","price":3788.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-853.JPG?v=1485460406"},{"product_id":"c-a-technologies-5-gallon-stainless-steel-paint-pressure-tank-bottom-outlet","title":"C.A. Technologies 5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet","description":"\u003cp\u003eThe 5 gallon, non-ASME, stainless steel bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-921) or dual regulators (51-922) and No pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  5 Gallon Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet stainless steel pressure tanks are available. Please refer to item numbers 51-851 (single regulator) or 51-852 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_920-921-922_Part_Sheet.pdf?5509982547428107213\" target=\"_blank\"\u003e\u003cstrong\u003e5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet (51-921 \u0026amp; 51-922) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-921-P)","offer_id":29896093513,"sku":"X00042794","price":3214.57,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-922)","offer_id":29896093577,"sku":"51-922","price":3300.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-921.JPG?v=1485536651"},{"product_id":"c-a-technologies-5-gallon-stainless-steel-paint-pressure-tank-bottom-outlet-1","title":"C.A. Technologies 5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet with Pneumatic Agitation (mixer)","description":"\u003cp\u003eThe 5 gallon, non-ASME, stainless steel bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-923) or dual regulators (51-924) and\u003cspan\u003e pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003eThe tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  5 Gallon Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.) \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet stainless steel pressure tanks are available. Please refer to item numbers 51-853 (single regulator) or 51-854 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003cstrong style=\"color: #0000ff;\"\u003e5 \u003ca style=\"color: #0000ff;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_923-924-925_Part_Sheet.pdf?5509982547428107213\" target=\"_blank\"\u003eGallon Stainless Steel Paint Pressure Tank – Bottom Outlet (51-923 \u0026amp; 51-924) Part Sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-923)","offer_id":29897425545,"sku":"51-923","price":3706.36,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-924)","offer_id":29897425609,"sku":"X00080751","price":3737.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-923.JPG?v=1485538699"},{"product_id":"c-a-technologies-12-5-gallon-stainless-steel-paint-pressure-tank","title":"C.A. Technologies 12.5 Gallon Stainless Steel Paint Pressure Tank","description":"\u003cp\u003eThe 12.5 gallon, stainless steel, non-ASME pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-881) or dual regulators (51-882) and No pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 19”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that Bottom Outlet pressure tanks are available. Please refer to item numbers 51-941 (single regulator) or 51-942 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_881-882_Part_Sheet.pdf?5509982547428107213\" style=\"color: #0000ff;\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e12.5 Gallon Stainless Steel Paint Pressure Tank (51-881 \u0026amp; 51-882) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-881)","offer_id":30079869065,"sku":"X00042788","price":3978.99,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-882)","offer_id":30079869129,"sku":"51-882","price":4013.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-881.JPG?v=1491849127"},{"product_id":"c-a-technologies-12-5-gallon-stainless-steel-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"C.A. Technologies 12.5 Gallon Stainless Steel Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003eThe 12.5 gallon, stainless steel, non-ASME pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-883) or dual regulators (51-884) and pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is\u003cspan\u003e \u003c\/span\u003eover-sized and does not qualify for free freight\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 19”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for this agitated tank.  Please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e   \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIn addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-943 (single regulator) or 51-944 (dual regulators) for similar tank configurations in a bottom outlet tank).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_883-884_Part_Sheet.pdf?11486506702566867862\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003cstrong style=\"color: #0000ff; text-decoration: underline;\"\u003e12.5 Gallon Stainless Steel Paint Pressure Tank (51-883 \u0026amp; 51-884) Part Sheet\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003c\/span\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-883)","offer_id":30080826889,"sku":"X00042789","price":4323.33,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-884)","offer_id":30080827017,"sku":"51-884","price":4470.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-883.JPG?v=1485894762"},{"product_id":"c-a-technologies-12-5-gallon-stainless-steel-paint-pressure-tank-bottom-outlet","title":"C.A. Technologies 12.5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet","description":"\u003cp\u003eThe 12.5 gallon, non-ASME, stainless steel bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-941) or dual regulators (51-942) and No pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 19”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet stainless steel pressure tanks are available. Please refer to item numbers 51-881 (single regulator) or 51-882 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca rel=\"noopener noreferrer\" style=\"color: #0000ff;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_940-941-942_Part_Sheet_cc9bd3a5-c9bd-41e9-8c58-c80c0ce4f69c.pdf?11486506702566867862\" target=\"_blank\"\u003e\u003cstrong\u003e12.5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet (51-941 \u0026amp; 51-942) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single (51-941-P)","offer_id":30108839305,"sku":"X00042795","price":4309.05,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-942)","offer_id":30108839369,"sku":"51-942","price":4395.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-941.JPG?v=1485962234"},{"product_id":"c-a-technologies-12-5-gallon-paint-pressure-tank-bottom-outlet-with-pneumatic-agitation-mixer","title":"C.A. Technologies 12.5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet with Pneumatic Agitation (mixer)","description":"\u003cp\u003eThe 12.5 gallon, non-ASME, stainless steel bottom outlet pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-943) or dual regulators (51-944) and\u003cspan\u003e pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003eThe tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eThis item is over-sized and does not qualify for free shipping.  Bottom Outlet Pressure Tanks\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emust ship via truck (LTL)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand additional charges will apply.  (If applicable, a freight quote will be emailed.)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eBottom outlet tank with a 3\/4” NPT female fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 14.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 19”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*(Please note that replacement liners are not available for bottom outlet tanks. In addition, Top Outlet stainless steel pressure tanks are available. Please refer to item numbers 51-883 (single regulator) or 51-884 (dual regulators) for similar tank configurations in a top outlet tank).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/51-_943-944-945_Part_Sheet.pdf?11486506702566867862\" style=\"color: #0000ff;\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003e12.5 Gallon Stainless Steel Paint Pressure Tank – Bottom Outlet (51-943 \u0026amp; 51-944) Part Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Single - (51-943)","offer_id":30109520265,"sku":"51-943","price":4927.06,"currency_code":"USD","in_stock":true},{"title":"Dual - (51-944)","offer_id":30109520329,"sku":"X00044520","price":5013.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/51-943.JPG?v=1485964071"},{"product_id":"performance-series-2-5-gallon-stainless-steel-paint-pressure-tank","title":"Performance Series 2.5 Gallon Stainless Steel Paint Pressure Tank","description":"\u003cp\u003eThe Performance Series 2.5 gallon, stainless steel, non-ASME pressure tank (pressure pot) come configured with either single or dual regulators and No pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e                 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that replacement liners are available under item number SS11-75.) \u003c\/em\u003e\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Single","offer_id":30168361353,"sku":"X00043131","price":1760.0,"currency_code":"USD","in_stock":true},{"title":"Dual","offer_id":30168361417,"sku":"X00052314","price":1852.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7535-ESS.10.jpg?v=1489511635"},{"product_id":"performance-series-2-5-gallon-stainless-steel-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"Performance Series 2.5 Gallon Stainless Steel Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003e\u003cspan\u003eThe Performance Series 2.5 gallon stainless steel, non-ASME, pressure tank (pressure pot) come configured with either single or dual regulators and pneumatic agitation (mixer).\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003eThe tank is constructed of 304 grade stainless steel \u003cspan\u003eand has wheels for maneuverability or optional stationary feet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 10.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 8.75”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e replacement\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e liners are available under item number PLB-1175.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Single","offer_id":30171879753,"sku":"X00043128","price":2118.0,"currency_code":"USD","in_stock":true},{"title":"Dual","offer_id":30171879817,"sku":"X00012177","price":2232.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7535-ASS.1.jpg?v=1489511847"},{"product_id":"performance-series-5-gallon-stainless-steel-paint-pressure-tank","title":"Performance Series 5 Gallon Stainless Steel Paint Pressure Tank","description":"\u003cp\u003eThe Performance 5 gallon, stainless steel, non-ASME pressure tank (pressure pot) come configured with either single or dual regulators and No pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eStandard 5 gallon pails will fit inside the tank\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003eNo pneumatic agitation (mixer)\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that rigid liners are available under item number PLB-1108 (These liners are the correct depth, but are 12” in diameter which is slightly undersized).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e  \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIf you would rather use a bag liner please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e   \u003c\/em\u003e\u003c\/span\u003e \u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Single","offer_id":30175709001,"sku":"X00043138","price":2414.0,"currency_code":"USD","in_stock":true},{"title":"Dual","offer_id":30175709065,"sku":"X00012082","price":2535.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/7540-ESS.4.jpg?v=1488572287"},{"product_id":"performance-series-5-gallon-stainless-steel-paint-pressure-tank-with-pneumatic-agitation-mixer","title":"Performance Series 5 Gallon Stainless Steel Paint Pressure Tank with Pneumatic Agitation (mixer)","description":"\u003cp\u003eThe Performance Series 5 gallon, stainless steel, non-ASME pressure tank (pressure pot) come configured with either single or dual regulators and pneumatic agitation (mixer). The tank is constructed of 304 grade stainless steel and has wheels for maneuverability or optional stationary feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished tank shell interior for easy cleanup\u003c\/li\u003e\n\u003cli\u003eStandard 5 gallon pails will fit inside the tank\u003c\/li\u003e\n\u003cli\u003eTop outlet tank with a 3\/8” NPS male fluid outlet\u003c\/li\u003e\n\u003cli\u003e¼” NPS male air inlet \u0026amp; outlet\u003c\/li\u003e\n\u003cli\u003eTank inside diameter is 12.5”\u003c\/li\u003e\n\u003cli\u003eTank inside depth is 15.5”\u003c\/li\u003e\n\u003cli\u003eSingle or dual regulator options\u003c\/li\u003e\n\u003cli\u003ePneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)\u003c\/li\u003e\n\u003cli\u003eSingle mixing blade\u003c\/li\u003e\n\u003cli\u003eStainless steel pickup tube comes with a reusable screen\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 ¼” fill port on tank lid for filling without removing the lid\u003c\/li\u003e\n\u003cli\u003eIncludes casters for maneuverability\u003c\/li\u003e\n\u003cli\u003eMaximum pressure rating of 80 psi\u003c\/li\u003e\n\u003cli\u003eSafety relief valve\u003c\/li\u003e\n\u003cli\u003eVent valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*(Please note that bag liners are available for this agitated tank.  Please reference 51-543-10 (10 pack) or 51-543-100 (100 pack).\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e   \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e \u003c\/p\u003e","brand":"Performance Series","offers":[{"title":"Single","offer_id":30176474377,"sku":"X00043137","price":2815.0,"currency_code":"USD","in_stock":true},{"title":"Dual","offer_id":30176474441,"sku":"X00052315","price":2935.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/7540-ASS.png?v=1687986000"},{"product_id":"3m-accuspray-hgp-hvlp-gravity-pressure-feed-spray-gun","title":"3M ACCUSPRAY HGP HVLP Gravity Pressure Feed Spray Gun - (16587)","description":"\u003cp\u003eThe 3M ACCUSPRAY HGP HVLP Gravity Pressure Feed Spray Gun is designed to spray very high solids coatings such as gel-coat, polyester, epoxies, adhesives and boat bottom marine coatings, etc. effectively. The 3M HGP spray gun includes two 2.0mm and two 1.8 mm replacement atomizing heads and an airflow control valve. The 3M PPS H\/O pressure cup with the liners and lids are sold separately.\u003c\/p\u003e\n\u003cp\u003eWe can no longer say \"there is not a spray gun that doesn’t requires cleaning or maintenance\".  The 3M\u003csup\u003eTM\u003c\/sup\u003e HG Accuspray gun provides the most important feature EXCELLENT ATOMIZATION with the convenience of \u003cstrong\u003e5 to 8 spray outs before the head needs replacement\u003c\/strong\u003e.  When the needle packing seal starts to leak back into the clear fluid tube the head needs replacement. The average head cost per spray-out is $0.50 to $0.60.  With every new head replacement it offers “Like New Gun Performance”!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir Inlet - 1\/4” NPS (m)\u003c\/li\u003e\n\u003cli\u003eWeight – 11.2 oz.\u003c\/li\u003e\n\u003cli\u003eRequired atomizing air pressure is 20 psi\u003c\/li\u003e\n\u003cli\u003eRequired atomizing air volume is 13 cfm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the spray gun does not require a repair kit.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please contact us).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3M\u003csup\u003eTM\u003c\/sup\u003e HG and HGP Care and Cleaning Procedures\u003c\/p\u003e\n\u003cp\u003eDo not backpressure the gun.\u003cbr\u003e \u003cbr\u003e There are two Teflon O-rings or seals in the atomizing head. When you slide the atomizing head onto the needle the seals are pushed out towards the front of the gun. This seals the needle passage so the air and fluid going through the gun does not blow back into the gun body. If you back pressure the gun it will flip the Teflon seals so they point back into the gun. When you add fluid and pressure it sneaks past the seals and comes out in front of the handle.\u003cbr\u003e \u003cbr\u003e The solution is to clean the gun properly.\u003cbr\u003e \u003cbr\u003e While the atomizing head is on the gun, fill it half way with whatever cleaner is required for your coating. Cover and shake it a bit to loosen any residue. Pull the trigger and drain. Fill the atomizing head two more times with cleaner and drain through the tip by pulling the trigger. Pull the atomizing head straight off the gun. Do not twist as you're pulling. Fill the needle port on the back side of the atomizing head with cleaner and drain. Inspect to make sure there is no residue left in the atomizing head and repeat if needed.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":31309912521,"sku":"X00079903","price":395.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/16587.jpg?v=1554927575"},{"product_id":"c-a-technologies-007-water-base-fine-finish-double-groove-air-assist-airless-tip","title":"C.A. Technologies .007\" Water Base Fine Finish Double Groove Air Assist Airless Tip","description":"\u003cp\u003eThe .007\" C.A. Technologies interchangeable Fine Finish Air Assist Airless tip has a pre-orifice that helps prevent micro bubbles when spraying water based coatings. This tip works with any Bobcat and Cougar Air Assist Airless spray guns as well as European Air Assist Airless Spray guns.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003e.007\" orifice size (pre-atomizing fine finish opt-tip)\u003c\/li\u003e\n\u003cli\u003e4 oz.\/min flow rate (The flow rate is ounces of water at 500 psi)\u003c\/li\u003e\n\u003cli\u003e20 or 40 degree angle\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePattern width dependent upon tip angle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eReplaces European P\/N's:\u003c\/li\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e03-052 replaced by 36-207-F\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e03-092 replaced by 36-407-F\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003e*(Please note that when using the tip with a European Air Assist Airless spray gun model you will need to remove the retaining clip on the tip).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"207 - 20° Angle (2-5\" Pattern Width) - (36-207-F)","offer_id":12378054426702,"sku":"36-207-F","price":132.82,"currency_code":"USD","in_stock":true},{"title":"407 - 40° Angle (3-9\" Pattern Width) - (36-407-F)","offer_id":12378063601742,"sku":"X00042490","price":132.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/36-207_0c0de29c-12ce-4030-887d-b1b5fc962e50.jpeg?v=1529085743"},{"product_id":"c-a-technologies-009-water-base-fine-finish-double-groove-air-assist-airless-tip-1","title":"C.A. Technologies .009\" Water Base Fine Finish Double Groove Air Assist Airless Tip","description":"\u003cp\u003eThe .009\" C.A. Technologies interchangeable Fine Finish Air Assist Airless tip has a pre-orifice that helps prevent micro bubbles when spraying water based coatings. This tip works with any Bobcat and Cougar Air Assist Airless spray guns as well as European Air Assist Airless Spray guns.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003e.009\" orifice size (pre-atomizing fine finish opt-tip)\u003c\/li\u003e\n\u003cli\u003e5.5 oz.\/min flow rate (The flow rate is ounces of water at 500 psi)\u003c\/li\u003e\n\u003cli\u003e30, 40, 50 or 70 degree angle\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePattern width dependent upon tip angle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eReplaces European P\/N's:\u003c\/li\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e04-072 replaced by 36-309-F\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e04-092 replaced by 36-409-F\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e04-112 replaced by 36-509-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e04-152 replaced by 36-709-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003e*(Please note that when using the tip with a European Air Assist Airless spray gun model you will need to remove the retaining clip on the tip).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"309 - 30° Angle (2-7\" Pattern Width) - (36-309-F)","offer_id":12378069827662,"sku":"X00042484","price":132.82,"currency_code":"USD","in_stock":true},{"title":"409 - 40° Angle (3-9\" Pattern Width) - (36-409-F)","offer_id":12378069860430,"sku":"X00042492","price":132.82,"currency_code":"USD","in_stock":true},{"title":"509 - 50° Angle (3-10\" Pattern Width) - (36-509-F)","offer_id":12378071793742,"sku":"X00042499","price":132.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/36-207_702fb22e-13f4-4e2c-a0f8-ec8472c8fc6e.jpeg?v=1529085891"},{"product_id":"c-a-technologies-011-water-base-fine-finish-double-groove-air-assist-airless-tip","title":"C.A. Technologies .011\" Water Base Fine Finish Double Groove Air Assist Airless Tip","description":"\u003cp\u003eThe .011\" C.A. Technologies interchangeable Fine Finish Air Assist Airless tip has a pre-orifice that helps prevent micro bubbles when spraying water based coatings. This tip works with any Bobcat and Cougar Air Assist Airless spray guns as well as European Air Assist Airless Spray guns.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003e.011\" orifice size (pre-atomizing fine finish opt-tip)\u003c\/li\u003e\n\u003cli\u003e6.8 oz.\/min flow rate (The flow rate is ounces of water at 500 psi)\u003c\/li\u003e\n\u003cli\u003e20, 30, 40, 50 or 60 degree angle\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePattern width dependent upon tip angle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eReplaces European P\/N's:\u003c\/li\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e06-052 replaced by 36-211-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e06-072 replaced by 36-311-F\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e06-092 replaced by 36-411-F\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e06-112 replaced by 36-511-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e06-132 replaced by 36-611-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e06-152 replaced by 36-711-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003e*(Please note that when using the tip with a European Air Assist Airless spray gun model you will need to remove the retaining clip on the tip).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"211 - 20° Angle (2-5\" Pattern Width) - (36-211-F)","offer_id":12378076151886,"sku":"X00042480","price":132.82,"currency_code":"USD","in_stock":true},{"title":"311 - 30° Angle (2-7\" Pattern Width) - (36-311-F)","offer_id":12378075856974,"sku":"X00042486","price":132.82,"currency_code":"USD","in_stock":true},{"title":"411 - 40° Angle (3-9\" Pattern Width) - (36-411-F)","offer_id":12378075889742,"sku":"X00042493","price":132.82,"currency_code":"USD","in_stock":true},{"title":"511 - 50° Angle (3-10\" Pattern Width) - (36-511-F)","offer_id":12378075922510,"sku":"X00042500","price":132.82,"currency_code":"USD","in_stock":true},{"title":"611 - 60° Angle (4-12\" Pattern Width) - (36-611-F)","offer_id":12378075955278,"sku":"X00042504","price":132.82,"currency_code":"USD","in_stock":true},{"title":"711 - 70° Angle (10-14\" Pattern Width) - (36-711-F)","offer_id":29599306022990,"sku":"X00042512","price":132.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/36-207_ccccf972-301a-406f-b531-818566074a64.jpeg?v=1529086715"},{"product_id":"c-a-technologies-013-water-base-fine-finish-double-groove-air-assist-airless-tip","title":"C.A. Technologies .013\" Water Base Fine Finish Double Groove Air Assist Airless Tip","description":"\u003cp\u003eThe .013\" C.A. Technologies interchangeable Fine Finish Air Assist Airless tip has a pre-orifice that helps prevent micro bubbles when spraying water based coatings. This tip works with any Bobcat and Cougar Air Assist Airless spray guns as well as European Air Assist Airless Spray guns.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cli\u003e.013\" orifice size (pre-atomizing fine finish opt-tip)\u003c\/li\u003e\n\u003cli\u003e9 oz.\/min flow rate (The flow rate is ounces of water at 500 psi)\u003c\/li\u003e\n\u003cli\u003e20, 30, 40, 50 or 60 degree angle\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePattern width dependent upon tip angle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eReplaces European P\/N's:\u003c\/li\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e09-052 replaced by 36-213-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e09-072 replaced by 36-313-F\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e09-092 replaced by 36-413-F\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e09-112 replaced by 36-513-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cspan\u003e09-132 replaced by 36-613-F\u003c\/span\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003e*(Please note that when using the tip with a European Air Assist Airless spray gun model you will need to remove the retaining clip on the tip).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"213 - 20° Angle (2-5\" Pattern Width) - (36-213-F)","offer_id":12378080444494,"sku":"X00042482","price":132.82,"currency_code":"USD","in_stock":true},{"title":"313 - 30° Angle (2-7\" Pattern Width) - (36-313-F)","offer_id":12378080477262,"sku":"36-313-F","price":132.82,"currency_code":"USD","in_stock":true},{"title":"413 - 40° Angle (3-9\" Pattern Width) - (36-413-F)","offer_id":12378080510030,"sku":"X00007209","price":132.82,"currency_code":"USD","in_stock":true},{"title":"513 - 50° Angle (3-10\" Pattern Width) - (36-513-F)","offer_id":12378080542798,"sku":"X00042501","price":132.82,"currency_code":"USD","in_stock":true},{"title":"613 - 60° Angle (4-12\" Pattern Width) - (36-613-F)","offer_id":12378080575566,"sku":"X00042506","price":132.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/36-207_d5046499-5d91-489e-9bf9-232e16d1aad3.jpeg?v=1529087353"},{"product_id":"3m-performance-gravity-hvlp-spray-gun-system-with-pps-series-2-0-26778","title":"3M™ Performance Gravity HVLP Spray Gun System with PPS™ Series 2.0 – (26778)","description":"\u003cp\u003eLightweight and easy to use, the 3M™ Performance Spray Gun was built for the modern painter. With a large fan pattern and excellent transfer efficiency this spray gun delivers on the premium performance you expect but with smarter clean-up. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry yet durable enough for today’s professional painters.\u003c\/p\u003e\n\u003cp\u003eDesigned for the modern painter, 3M brings you the latest innovation in spraying technology. A high-quality spray gun that is as beautiful and lightweight as it is functional and durable. This spray gun can live up to the standards and rising demands of today's professional painters – designed to keep up with you, your jobs and your environment.\u003c\/p\u003e\n\u003cp\u003eMade from an advanced impact-resistant composite material, the spray gun is one of the lightest in the industry yet durable enough to withstand the bumps and bruises of booth life. Every detail of the spray gun, from the trigger to the body, has been optimized by kinesiologists to enhance comfort, so you can paint all day without the weight of metal to drag you down.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to performance, the 3M™ Performance Spray Gun delivers a large fan pattern and excellent transfer efficiency that can match the metal spray guns in your collection – just with less weight and less fuss.\u003c\/p\u003e\n\u003cp\u003eWith an integrated system that includes quick-change nozzles and replaceable 3M™ PPS™ Series 2.0 Spray Cups, paint never passes through the body of the spray gun – which means no more disassembling, no more soaking in solvent and no more time wasted cleaning. It's like getting a brand-new paint gun every time you put on a fresh nozzle. And at sizes ranging from 1.2 to 2.0, you can seamlessly swap between coatings – from primers to basecoats to topcoats.\u003c\/p\u003e\n\u003cp\u003eThe 3M™ Performance Spray Gun is the smarter choice for the modern painter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir Inlet - 1\/4” NPS (m)\u003c\/li\u003e\n\u003cli\u003eWeight – 11.2 oz.\u003c\/li\u003e\n\u003cli\u003eRecommended air inlet pressure is 20 psi (1.38) for gravity feed\u003c\/li\u003e\n\u003cli\u003eRequired atomizing air volume is 13 cfm\u003c\/li\u003e\n\u003cli\u003eLightweight, impact-resistant body made from advanced composite material\u003c\/li\u003e\n\u003cli\u003eSeamless integration with the 3M™ PPS™ Series 2.0 Spray Cup System\u003c\/li\u003e\n\u003cli\u003eQuick-change, replaceable nozzles ranging from 1.2 to 2.0\u003c\/li\u003e\n\u003cli\u003eDesigned for comfort\u003c\/li\u003e\n\u003cli\u003eSimple, innovative design means fewer parts to maintain or rebuild\u003c\/li\u003e\n\u003cli\u003eWith every new head replacement, it offers “Like New Gun Performance”!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26778, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100285101 (7100228106) (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455117683 (60455108633)), \u003cstrong\u003eUPC \u003c\/strong\u003e00068060533548 (00051131267787)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLightweight and easy to use, the 3M™ Performance Spray Gun was built for the industrial painter. Made from impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding conditions. Its versatile design allows spraying from a pressurized source or a gravity cup. Replaceable nozzles from 1.1 to 2.0 allow you to spray a wide range of coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLightweight and Durable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne of the lightest spray guns in the industry, the impact-resistant composite body is built to withstand demanding industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplaceable Nozzles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith quick-change replaceable atomizing heads ranging from 1.1 to 2.0, it’s like getting a brand new spray gun with every new nozzle.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Maintenance and Easy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSimple, intuitive design means fewer parts to maintain or rebuild and can help achieve more consistent performance whether you’re a beginner or a pro.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Versatility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprays a wide range of coatings, including stains, primers, basecoats, topcoats, clearcoats, and adhesives – from either a pressure-fed system or with 3M™ PPS™ Series 2.0 Spray Cup System.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpray Gun System Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) - 3M™ Performance Spray Gun\u003c\/li\u003e\n\u003cli\u003e(1) - Locking Color\u003c\/li\u003e\n\u003cli\u003e(1) - Air Control Valve \u0026amp; Gauge\u003c\/li\u003e\n\u003cli\u003e(1) - 125 micron lid\u003c\/li\u003e\n\u003cli\u003e(4) - 200 micron lids\u003c\/li\u003e\n\u003cli\u003e(1) - 650 ml (22 oz) gravity hard cup\u003c\/li\u003e\n\u003cli\u003e(5) - 650 ml (22 oz) liners\u003c\/li\u003e\n\u003cli\u003e(3) - PPS Plugs\u003c\/li\u003e\n\u003cli\u003e(5) - 1.2 mm gravity atomizing head\u003c\/li\u003e\n\u003cli\u003e(5) - 1.3 mm gravity atomizing head\u003c\/li\u003e\n\u003cli\u003e(5) - 1.4 mm gravity atomizing head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eAdditional atomizing heads and PPS liners and lids sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/muRyJ6qOFx4\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"3M Performance Spray Gun HVLP - Industrial Quick Start Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_Performance_Spray_Gun_HVLP_-_Inindustrial_Quick_Start_Guide.pdf?v=1592929217\" target=\"_blank\"\u003e\u003cstrong\u003e3M Performance Spray Gun HVLP - Industrial Quick Start Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"3M Performance Spray Gun HVLP - Technical Data Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_Performance_Spray_Gun_TDS_26778_26832_26878.pdf?v=1592929206\" target=\"_blank\"\u003e\u003cstrong\u003e3M Performance Spray Gun HVLP - Technical Data Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"3M Performance Spray Gun HVLP - Spray Gun Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_Performance_Spray_Gun_-_Spray_Gun_Manual.pdf?v=1592929141\" target=\"_blank\"\u003e\u003cstrong\u003e3M Performance Spray Gun HVLP - Spray Gun Manual\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"3M Performance Spray Gun HVLP - Tips \u0026amp; Tricks\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_Performance_Spray_Gun_-_Tips_and_Tricks.pdf?v=1593705142\" target=\"_blank\"\u003e\u003cstrong\u003e3M Performance Spray Gun HVLP - Tips \u0026amp; Tricks\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*(Please note that the spray gun and nozzles should not be immersed in cleaning solvents or gun washers.  The maximum operational air pressure of this HVLP spray gun is 20 psi.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please see the technical data sheet and spray gun manual).\u003c\/em\u003e\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":32424507998286,"sku":"X00058823","price":595.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/26778_Frontside.jpg?v=1593721078"},{"product_id":"c-a-technologies-h2o-air-assist-airless-aaa-14-1-bobcat-peak-performance-pump-wall-model-set-up","title":"C.A. Technologies H2O Air-Assist-Airless (AAA) 14:1 Bobcat Peak Performance Pump - Wall Model Set-up - (PK-H20-OB14-W5-P-12-411F)","description":"\u003cp\u003eThe C.A. Technologies H2O Air Assist Airless spray system is a stainless steel 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US.  The H2O-B14 AAA pump system offers air assisted airless technology which combines airless and conventional or HVLP air atomization technologies to produce a very soft yet highly atomized spray pattern suitable for fine finish and high production work. The soft spray pattern has minimal over-spray and results in excellent material transfer efficiency.  The H2O AAA units come standard with larger fluid passages and an Opti-tip to help reduce micro bubbling, one of the problems associated with spraying waterborne coatings.\u003cstrong\u003e  \u003c\/strong\u003eThe H2O equipment is labeled “H2O” for this application so customers will not confuse the solvent based and water based units in their shops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump Ratio - 14:1\u003c\/li\u003e\n\u003cli\u003eMax Air Pressure - 107 PSI\u003c\/li\u003e\n\u003cli\u003eMax Fluid Pressure - 1500 PSI\u003c\/li\u003e\n\u003cli\u003eFluid Volume - 1\/3 (0.33) GPM per cycle (supports one gun up to .024 orifice size)\u003c\/li\u003e\n\u003cli\u003eAir Volume Requirements – 6 cfm\u003c\/li\u003e\n\u003cli\u003ePre-atomizing Fine Finish Opti-tip - 0.011\" orifice size at 40° angle\u003c\/li\u003e\n\u003cli\u003eGun Handle Filter - 100 mesh\u003c\/li\u003e\n\u003cli\u003eFluid Hose - 3\/16” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eAir Hose - ¼” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eMaterial Pick-Up Tube - ½” I.D. x 5 gallon length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump offers a .33 GPM output for quick product changes with very little waste\u003c\/li\u003e\n\u003cli\u003eNew 14:1 Peak Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity\u003c\/li\u003e\n\u003cli\u003eSimple direct acting valve is resistant to icing\u003c\/li\u003e\n\u003cli\u003eLong life carbon fiber cylinder and integrated noise suppression design for quiet operation\u003c\/li\u003e\n\u003cli\u003eFluid section is all stainless featuring a non-contact pump tube that never wears out\u003c\/li\u003e\n\u003cli\u003eCartridge style piston seal and guide for quick field replacement\u003c\/li\u003e\n\u003cli\u003eLarge capacity solvent cup and 360 degree fluid inlet\/outlet orientation\u003c\/li\u003e\n\u003cli\u003eUpper seal is a heavy duty V-Packing design for pre-cat lacquers, conversion varnish, polyurethanes and other harsh materials (This $154.75 packing upgrade is included in our pump packages)\u003c\/li\u003e\n\u003cli\u003eLightweight Bobcat AAA-HVLP gun with .011\" tip at 40° angle pre-atomizing opti-tip designed for water base finishes (other tip sizes available)\u003c\/li\u003e\n\u003cli\u003e25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose to handle thicker water based materials\u003c\/li\u003e\n\u003cli\u003eLarger ½” I.D. material pick-up tube to offer less “turbulence” when spraying water based products (Flexible 5 gallon length with replaceable nylon inlet filter)\u003c\/li\u003e\n\u003cli\u003eOptional 55 gallon pick-up tube available for larger applications\u003c\/li\u003e\n\u003cli\u003eOptional hopper feed setup available for smaller applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpray System Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) – H2O Air-Assisted Airless 14:1 Wall Mount Pump\u003c\/li\u003e\n\u003cli\u003e(1) – H2O Bobcat Air-Assisted Airless Spray Gun with 411 Pre-Atomizing Fine Finish Opti-Tip\u003c\/li\u003e\n\u003cli\u003e(1) – 100 Mesh Gun Handle Filter\u003c\/li\u003e\n\u003cli\u003e(1) – ½” Material Pick-Up Tube\u003c\/li\u003e\n\u003cli\u003e(1) – 25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose\u003c\/li\u003e\n\u003cli\u003e(1) - Throat Seal Lubricant - 250 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/H2O-OB14_Peak_Part_Sheet.pdf?v=1667490199\" title=\"C.A. Technologies H2O Air-Assist Airless 14:1 Bobcat Peak Performance Pump - Part Sheet\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Air-Assist Airless 14:1 Bobcat Peak Performance Pump - Part Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.spraycat.com\/trainingvideos.html\" target=\"_blank\" title=\"C.A. Technologies Air-Assist Airless – Training Videos\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless – Training Videos\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/Waterborne_Coating_Solutions.pdf?v=1667489753\" title=\"C.A. Technologies H2O Coating Solutions - Sales Sheet\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Coating Solutions - Sales Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/AAA_Kremlin_Tip_Conversion_SL.pdf?v=1625767660\" title=\"C.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the H20 AAA outfits include a pre-atomizing fine finish opti-tip (36-XXX-F), 100 mesh gun handle filter, 1\/2\" material pick-up tube and larger 3\/16\" fluid hose to handle thicker water based materials.  The maximum operational air pressure of this HVLP spray gun is 20 psi.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please see the technical data sheet and spray gun manual.\u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":40091976269902,"sku":"X00044076","price":3549.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/H2O-OB14-W5.jpg?v=1667500272"},{"product_id":"copy-of-c-a-technologies-h2o-air-assist-airless-aaa-14-1-bobcat-peak-performance-pump-wall-model-set-up","title":"C.A. Technologies H2O Air-Assist-Airless (AAA) 14:1 Cougar Peak Performance Pump - Wall Model Set-Up - (PK-H20-OC14-W5-P-12-411F)","description":"\u003cp\u003eThe C.A. Technologies H2O Air Assist Airless spray system is a stainless steel 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US.  The H2O-C14 AAA pump system offers air assisted airless technology which combines airless and conventional or HVLP air atomization technologies to produce a very soft yet highly atomized spray pattern suitable for fine finish and high production work. The soft spray pattern has minimal over-spray and results in excellent material transfer efficiency.  The H2O AAA units come standard with larger fluid passages and an Opti-tip to help reduce micro bubbling, one of the problems associated with spraying waterborne coatings.\u003cstrong\u003e  \u003c\/strong\u003eThe H2O equipment is labeled “H2O” for this application so customers will not confuse the solvent based and water based units in their shops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump Ratio - 14:1\u003c\/li\u003e\n\u003cli\u003eMax Air Pressure - 107 PSI\u003c\/li\u003e\n\u003cli\u003eMax Fluid Pressure - 1500 PSI\u003c\/li\u003e\n\u003cli\u003eFluid Volume - 1\/3 (0.33) GPM per cycle (supports one gun up to .024 orifice size)\u003c\/li\u003e\n\u003cli\u003eAir Volume Requirements – 6 cfm\u003c\/li\u003e\n\u003cli\u003ePre-atomizing Fine Finish Opti-tip - 0.011\" orifice size at 40° angle\u003c\/li\u003e\n\u003cli\u003eGun Handle Filter - 100 mesh\u003c\/li\u003e\n\u003cli\u003eFluid Hose - 3\/16” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eAir Hose - ¼” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eMaterial Pick-Up Tube - ½” I.D. x 5 gallon length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump offers a .33 GPM output for quick product changes with very little waste\u003c\/li\u003e\n\u003cli\u003eNew 14:1 Peak Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity\u003c\/li\u003e\n\u003cli\u003eSimple direct acting valve is resistant to icing\u003c\/li\u003e\n\u003cli\u003eLong life carbon fiber cylinder and integrated noise suppression design for quiet operation\u003c\/li\u003e\n\u003cli\u003eFluid section is all stainless featuring a non-contact pump tube that never wears out\u003c\/li\u003e\n\u003cli\u003eCartridge style piston seal and guide for quick field replacement\u003c\/li\u003e\n\u003cli\u003eLarge capacity solvent cup and 360 degree fluid inlet\/outlet orientation\u003c\/li\u003e\n\u003cli\u003eUpper seal is a heavy duty V-Packing design for pre-cat lacquers, conversion varnish, polyurethanes and other harsh materials (This $154.75 packing upgrade is included in our pump packages)\u003c\/li\u003e\n\u003cli\u003eCougar AAA-HVLP gun with .011\" tip at 40° angle pre-atomizing opti-tip designed for water base finishes (other tip sizes available)\u003c\/li\u003e\n\u003cli\u003e25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose to handle thicker water based materials\u003c\/li\u003e\n\u003cli\u003eLarger ½” I.D. material pick-up tube to offer less “turbulence” when spraying water based products (Flexible 5 gallon length with replaceable nylon inlet filter)\u003c\/li\u003e\n\u003cli\u003eOptional 55 gallon pick-up tube available for larger applications\u003c\/li\u003e\n\u003cli\u003eOptional hopper feed setup available for smaller applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpray System Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) – H2O Air-Assisted Airless 14:1 Wall Mount Pump\u003c\/li\u003e\n\u003cli\u003e(1) – H2O Cougar Air-Assisted Airless Spray Gun with 411 Pre-Atomizing Fine Finish Opti-Tip\u003c\/li\u003e\n\u003cli\u003e(1) – 100 Mesh Gun Handle Filter\u003c\/li\u003e\n\u003cli\u003e(1) – ½” Material Pick-Up Tube\u003c\/li\u003e\n\u003cli\u003e(1) – 25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose\u003c\/li\u003e\n\u003cli\u003e(1) - Throat Seal Lubricant - 250 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/H2O-OC14_Peak_Part_Sheet.pdf?v=1667490231\" target=\"_blank\" title=\"C.A. Technologies H2O Air-Assist Airless 14:1 Cougar Peak Performance Pump - Part Sheet\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Air-Assist Airless 14:1 Cougar Peak Performance Pump - Part Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.spraycat.com\/trainingvideos.html\" title=\"C.A. Technologies Air-Assist Airless – Training Videos\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless – Training Videos\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/Waterborne_Coating_Solutions.pdf?v=1667489753\" title=\"C.A. Technologies H2O Coating Solutions - Sales Sheet\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Coating Solutions - Sales Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/AAA_Kremlin_Tip_Conversion_SL.pdf?v=1625767660\" title=\"C.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the H20 AAA outfits include a pre-atomizing fine finish opti-tip (36-XXX-F), 100 mesh gun handle filter, 1\/2\" material pick-up tube and larger 3\/16\" fluid hose to handle thicker water based materials.  The maximum operational air pressure of this HVLP spray gun is 20 psi.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please see the technical data sheet and spray gun manual.\u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":40093938450510,"sku":"X00044077","price":3549.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/H2O-OC14-W5.jpg?v=1667499682"},{"product_id":"c-a-technologies-h2o-air-assist-airless-aaa-14-1-cougar-peak-performance-pump-cart-model-set-up-1","title":"C.A. Technologies H2O Air-Assist-Airless (AAA) 14:1 Cougar Peak Performance Pump - Cart Model Set-Up - (PK-H20-OC14-C5-P-12-411F)","description":"\u003cp\u003eThe C.A. Technologies H2O Air Assist Airless spray system is a stainless steel 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US.  The H2O-C14 AAA pump system offers air assisted airless technology which combines airless and conventional or HVLP air atomization technologies to produce a very soft yet highly atomized spray pattern suitable for fine finish and high production work. The soft spray pattern has minimal over-spray and results in excellent material transfer efficiency.  The H2O AAA units come standard with larger fluid passages and an Opti-tip to help reduce micro bubbling, one of the problems associated with spraying waterborne coatings.\u003cstrong\u003e  \u003c\/strong\u003eThe H2O equipment is labeled “H2O” for this application so customers will not confuse the solvent based and water based units in their shops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump Ratio - 14:1\u003c\/li\u003e\n\u003cli\u003eMax Air Pressure - 107 PSI\u003c\/li\u003e\n\u003cli\u003eMax Fluid Pressure - 1500 PSI\u003c\/li\u003e\n\u003cli\u003eFluid Volume - 1\/3 (0.33) GPM per cycle (supports one gun up to .024 orifice size)\u003c\/li\u003e\n\u003cli\u003eAir Volume Requirements – 6 cfm\u003c\/li\u003e\n\u003cli\u003ePre-atomizing Fine Finish Opti-tip - 0.011\" orifice size at 40° angle\u003c\/li\u003e\n\u003cli\u003eGun Handle Filter - 100 mesh\u003c\/li\u003e\n\u003cli\u003eFluid Hose - 3\/16” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eAir Hose - ¼” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eMaterial Pick-Up Tube - ½” I.D. x 5 gallon length\u003c\/li\u003e\n\u003cli\u003eCart Assembly Dimensions – 37” (H) x 24” (W) x 17” (D)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump offers a .33 GPM output for quick product changes with very little waste\u003c\/li\u003e\n\u003cli\u003eNew 14:1 Peak Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity\u003c\/li\u003e\n\u003cli\u003eSimple direct acting valve is resistant to icing\u003c\/li\u003e\n\u003cli\u003eLong life carbon fiber cylinder and integrated noise suppression design for quiet operation\u003c\/li\u003e\n\u003cli\u003eFluid section is all stainless featuring a non-contact pump tube that never wears out\u003c\/li\u003e\n\u003cli\u003eCartridge style piston seal and guide for quick field replacement\u003c\/li\u003e\n\u003cli\u003eLarge capacity solvent cup and 360 degree fluid inlet\/outlet orientation\u003c\/li\u003e\n\u003cli\u003eUpper seal is a heavy duty V-Packing design for pre-cat lacquers, conversion varnish, polyurethanes and other harsh materials (This $154.75 packing upgrade is included in our pump packages)\u003c\/li\u003e\n\u003cli\u003eCougar AAA-HVLP gun with .011\" tip at 40° angle pre-atomizing opti-tip designed for water base finishes (other tip sizes available)\u003c\/li\u003e\n\u003cli\u003e25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose to handle thicker water based materials\u003c\/li\u003e\n\u003cli\u003eLarger ½” I.D. material pick-up tube to offer less “turbulence” when spraying water based products (Flexible 5 gallon length with replaceable nylon inlet filter)\u003c\/li\u003e\n\u003cli\u003eRobust compact cart with large tires for easy mobility and portability of the spray system\u003c\/li\u003e\n\u003cli\u003eOptional 55 gallon pick-up tube available for larger applications\u003c\/li\u003e\n\u003cli\u003eOptional hopper feed setup available for smaller applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpray System Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) – H2O Air-Assisted Airless 14:1 Cart Mount Pump\u003c\/li\u003e\n\u003cli\u003e(1) – H2O Cougar Air-Assisted Airless Spray Gun with 411 Pre-Atomizing Fine Finish Opti-Tip\u003c\/li\u003e\n\u003cli\u003e(1) – 100 Mesh Gun Handle Filter\u003c\/li\u003e\n\u003cli\u003e(1) – ½” Material Pick-Up Tube\u003c\/li\u003e\n\u003cli\u003e(1) – 25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose\u003c\/li\u003e\n\u003cli\u003e(1) – Cart assembly\u003c\/li\u003e\n\u003cli\u003e(1) - Throat Seal Lubricant - 250 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/H2O-OC14_Peak_Part_Sheet.pdf?v=1667490231\" title=\"C.A. Technologies H2O Air-Assist Airless 14:1 Cougar Peak Performance Pump - Part Sheet\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Air-Assist Airless 14:1 Cougar Peak Performance Pump - Part Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.spraycat.com\/trainingvideos.html\" title=\"C.A. Technologies Air-Assist Airless – Training Videos\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless – Training Videos\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/Waterborne_Coating_Solutions.pdf?v=1667489753\" title=\"C.A. Technologies H2O Coating Solutions - Sales Sheet\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Coating Solutions - Sales Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/AAA_Kremlin_Tip_Conversion_SL.pdf?v=1625767660\" title=\"C.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the H20 AAA outfits include a pre-atomizing fine finish opti-tip (36-XXX-F), 100 mesh gun handle filter, 1\/2\" material pick-up tube and larger 3\/16\" fluid hose to handle thicker water based materials.  The maximum operational air pressure of this HVLP spray gun is 20 psi.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please see the technical data sheet and spray gun manual.\u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":40095142412366,"sku":"X00044222","price":3826.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/H2O-OC14-C5.jpg?v=1667581971"},{"product_id":"c-a-technologies-h2o-air-assist-airless-aaa-14-1-bobcat-peak-performance-pump-cart-model-set-up","title":"C.A. Technologies H2O Air-Assist-Airless (AAA) 14:1 Bobcat Peak Performance Pump - Cart Model Set-Up - (PK-H20-OB14-C5-P-12-411F)","description":"\u003cp\u003eThe C.A. Technologies H2O Air Assist Airless spray system is a stainless steel 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US.  The H2O-B14 AAA pump system offers air assisted airless technology which combines airless and conventional or HVLP air atomization technologies to produce a very soft yet highly atomized spray pattern suitable for fine finish and high production work. The soft spray pattern has minimal over-spray and results in excellent material transfer efficiency.  The H2O AAA units come standard with larger fluid passages and an Opti-tip to help reduce micro bubbling, one of the problems associated with spraying waterborne coatings.\u003cstrong\u003e  \u003c\/strong\u003eThe H2O equipment is labeled “H2O” for this application so customers will not confuse the solvent based and water based units in their shops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump Ratio - 14:1\u003c\/li\u003e\n\u003cli\u003eMax Air Pressure - 107 PSI\u003c\/li\u003e\n\u003cli\u003eMax Fluid Pressure - 1500 PSI\u003c\/li\u003e\n\u003cli\u003eFluid Volume - 1\/3 (0.33) GPM per cycle (supports one gun up to .024 orifice size)\u003c\/li\u003e\n\u003cli\u003eAir Volume Requirements – 6 cfm\u003c\/li\u003e\n\u003cli\u003ePre-atomizing Fine Finish Opti-tip - 0.011\" orifice size at 40° angle\u003c\/li\u003e\n\u003cli\u003eGun Handle Filter - 100 mesh\u003c\/li\u003e\n\u003cli\u003eFluid Hose - 3\/16” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eAir Hose - ¼” I.D. x 25 ft\u003c\/li\u003e\n\u003cli\u003eMaterial Pick-Up Tube - ½” I.D. x 5 gallon length\u003c\/li\u003e\n\u003cli\u003eCart Assembly Dimensions – 37” (H) x 24” (W) x 17” (D)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump offers a .33 GPM output for quick product changes with very little waste\u003c\/li\u003e\n\u003cli\u003eNew 14:1 Peak Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity\u003c\/li\u003e\n\u003cli\u003eSimple direct acting valve is resistant to icing\u003c\/li\u003e\n\u003cli\u003eLong life carbon fiber cylinder and integrated noise suppression design for quiet operation\u003c\/li\u003e\n\u003cli\u003eFluid section is all stainless featuring a non-contact pump tube that never wears out\u003c\/li\u003e\n\u003cli\u003eCartridge style piston seal and guide for quick field replacement\u003c\/li\u003e\n\u003cli\u003eLarge capacity solvent cup and 360 degree fluid inlet\/outlet orientation\u003c\/li\u003e\n\u003cli\u003eUpper seal is a heavy duty V-Packing design for pre-cat lacquers, conversion varnish, polyurethanes and other harsh materials (This $154.75 packing upgrade is included in our pump packages)\u003c\/li\u003e\n\u003cli\u003eLightweight Bobcat AAA-HVLP gun with .011\" tip at 40° angle pre-atomizing opti-tip designed for water base finishes (other tip sizes available)\u003c\/li\u003e\n\u003cli\u003e25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose to handle thicker water based materials\u003c\/li\u003e\n\u003cli\u003eLarger ½” I.D. material pick-up tube to offer less “turbulence” when spraying water based products (Flexible 5 gallon length with replaceable nylon inlet filter)\u003c\/li\u003e\n\u003cli\u003eRobust compact cart with large tires for easy mobility and portability of the spray system\u003c\/li\u003e\n\u003cli\u003eOptional 55 gallon pick-up tube available for larger applications\u003c\/li\u003e\n\u003cli\u003eOptional hopper feed setup available for smaller applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpray System Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) – H2O Air-Assisted Airless 14:1 Cart Mount Pump\u003c\/li\u003e\n\u003cli\u003e(1) – H2O Bobcat Air-Assisted Airless Spray Gun with 411 Pre-Atomizing Fine Finish Opti-Tip\u003c\/li\u003e\n\u003cli\u003e(1) – 100 Mesh Gun Handle Filter\u003c\/li\u003e\n\u003cli\u003e(1) – ½” Material Pick-Up Tube\u003c\/li\u003e\n\u003cli\u003e(1) – 25 ft Air \u0026amp; Fluid Hose Set with 3\/16” I.D. Fluid Hose \u0026amp; ¼” I.D. Air Hose\u003c\/li\u003e\n\u003cli\u003e(1) – Cart assembly\u003c\/li\u003e\n\u003cli\u003e(1) - Throat Seal Lubricant - 250 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/H2O-OB14_Peak_Part_Sheet.pdf?v=1667490199\" title=\"C.A. Technologies H2O Air-Assist Airless 14:1 Bobcat Peak Performance Pump - Part Sheet\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Air-Assist Airless 14:1 Bobcat Peak Performance Pump - Part Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.spraycat.com\/trainingvideos.html\" title=\"C.A. Technologies Air-Assist Airless – Training Videos\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless – Training Videos\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/Waterborne_Coating_Solutions.pdf?v=1667489753\" title=\"C.A. Technologies H2O Coating Solutions - Sales Sheet\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies H2O Coating Solutions - Sales Sheet\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/AAA_Kremlin_Tip_Conversion_SL.pdf?v=1625767660\" title=\"C.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eC.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the H20 AAA outfits include a pre-atomizing fine finish opti-tip (36-XXX-F), 100 mesh gun handle filter, 1\/2\" material pick-up tube and larger 3\/16\" fluid hose to handle thicker water based materials.  The maximum operational air pressure of this HVLP spray gun is 20 psi.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please see the technical data sheet and spray gun manual.\u003c\/em\u003e\u003c\/p\u003e","brand":"C.A. Technologies","offers":[{"title":"Default Title","offer_id":40095170199630,"sku":"X00044221","price":3826.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/products\/H2O-OB14-C5.jpg?v=1667582906"},{"product_id":"3m-accuspray-one-spray-gun-system-with-pps-series-2-0-spray-cup-system-26580","title":"3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0 Spray Cup System – (26580)","description":"\u003cp\u003eThe 3M™ Accuspray™ ONE Spray Gun System with Standard PPS™ Series 2.0 combines the simplicity and easy maintenance of our Accuspray™ spray gun with the material-saving, rapid clean-up convenience of PPS™ Series 2.0, the next generation, highest performing disposable spray cup system. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost.\u003cbr\u003e\u003cstrong style=\"font-style: inherit;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong style=\"font-style: inherit;\"\u003eONE System for Every Spraying Need\u003c\/strong\u003e\u003cbr\u003eThe 3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0 is the combination of convenience, versatility and efficiency. This system features the Accuspray™ ONE Spray Gun - a lightweight, composite spray gun body designed to eliminate the complexity of a traditional spray gun. This gun body has been engineered for enhanced durability in automotive and industrial environments. The spray gun uses a series of replaceable, see-through atomizing heads which can be reused 5-10 times and then simply removed and replaced. This affords the performance of a brand new spray gun, on demand and at a fraction of the price.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplaceable Atomizing Heads for the 3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003eOur 3M™ Accuspray™ Atomizing Heads for PPS™ Series 2.0 deliver the ideal atomization to a wide range of fluids and coatings applied with Accuspray™ ONE Spray Guns. Atomizing heads are available in five sizes: 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue). For sealers, basecoats and topcoats, we recommend 1.3 mm or 1.4 mm atomizing heads. Choose the 1.8 mm size for higher-viscosity materials such as primer, and the 2.0 mm size for heavy-duty applications using fluids like gel coats, adhesives, undercoats or industrial coatings. Always refer to your paint company’s recommendations. Fast, easy controls for fan diameter, fluid and air pressure on the Accuspray™ ONE gun allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12” vertical or horizontal spray patterns.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlong with the distinctive color, the fluid tip size is presented clearly on each atomizing head for fast, accurate selection. Atomizing heads are see-through to make it easy for technicians to determine that the head is properly cleaned.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAll atomizing heads work with our PPS™ Series 2.0 Spray Cup System – a system of reusable paint cups and disposable lids and liners, so you can be done with cleaning paint cups forever. ONE gun – ONE system for a complete range of applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 3m™ Accuspray™ ONE Spray gun is for use with compressed air systems only\u003c\/li\u003e\n\u003cli\u003eAir Inlet - 1\/4” NPS (m)\u003c\/li\u003e\n\u003cli\u003eMaximum air inlet pressure is 24 psi (Maximum inlet pressure will yield approximately 10 psi (0.69 bar) at the air cap)\u003c\/li\u003e\n\u003cli\u003eRequired atomizing air volume is 13 cfm\u003c\/li\u003e\n\u003cli\u003eWeight – 11.2 oz\u003c\/li\u003e\n\u003cli\u003e5 to 8 spray outs before the head needs replacement\u003c\/li\u003e\n\u003cli\u003eFor best atomization results use 13 cfm @ 20 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 26580, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100163226 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455090773), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131265806\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3M™ Accuspray™ Gravity Spray Gun Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) - 3M™ Accuspray™ Spray Gun Body\u003c\/li\u003e\n\u003cli\u003e(1) - Air Flow Control Valve \u0026amp; Gauge\u003c\/li\u003e\n\u003cli\u003e(1) - 125 micron lid\u003c\/li\u003e\n\u003cli\u003e(4) - 200 micron lids\u003c\/li\u003e\n\u003cli\u003e(1) - 650 ml (22 oz) standard size PPS™ 2.0 gravity hard cup\u003c\/li\u003e\n\u003cli\u003e(5) - 650 ml (22 oz) standard size PPS™ 2.0 liners\u003c\/li\u003e\n\u003cli\u003e(3) - PPS Plugs\u003c\/li\u003e\n\u003cli\u003e(1) - 1.2 mm (blue) PPS™ 2.0 gravity atomizing head\u003c\/li\u003e\n\u003cli\u003e(1) - 1.3 mm (green) PPS™ 2.0 gravity atomizing head\u003c\/li\u003e\n\u003cli\u003e(1) - 1.4 mm (orange) PPS™ 2.0  gravity atomizing head\u003c\/li\u003e\n\u003cli\u003e(1) - 1.8 mm (clear) PPS™ 2.0 gravity atomizing head\u003c\/li\u003e\n\u003cli\u003e(1) - 2.0 mm (red) PPS™ 2.0 gravity atomizing head\u003c\/li\u003e\n\u003cli\u003e(10) - Color Identification Clips (2 each of 5 colors)\u003c\/li\u003e\n\u003cli\u003e(1) - Quick start guide \u0026amp; owner’s manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eAdditional atomizing heads and PPS liners and lids sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_Accuspray_ONE_Spray_Gun_System_with_PPS_Series_2.0_Spray_Cup_System_26580_-_Owner_s_Manual.pdf?v=1708983166\" title=\"3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0 Spray Cup System 26580 - Owner's Manual\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0 Spray Cup System 26580 - Owner's Manual\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the spray gun does not require a repair kit.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please review the Owner’s Manual.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e3MTM HG and HGP Care and Cleaning Procedures\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDo not backpressure the gun.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThere are two Teflon O-rings or seals in the atomizing head. When you slide the atomizing head onto the needle the seals are pushed out towards the front of the gun. This seals the needle passage so the air and fluid going through the gun does not blow back into the gun body. If you back pressure the gun it will flip the Teflon seals so they point back into the gun. When you add fluid and pressure it sneaks past the seals and comes out in front of the handle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe solution is to clean the gun properly.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the atomizing head is on the gun, fill it half way with whatever cleaner is required for your coating. Cover and shake it a bit to loosen any residue. Pull the trigger and drain. Fill the atomizing head two more times with cleaner and drain through the tip by pulling the trigger. Pull the atomizing head straight off the gun. Do not twist as you're pulling. Fill the needle port on the back side of the atomizing head with cleaner and drain. Inspect to make sure there is no residue left in the atomizing head and repeat if needed.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":47746314010928,"sku":"X00044748","price":404.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/26580.png?v=1708982939"},{"product_id":"3m-accuspray-one-replacement-spray-gun-16579","title":"3M™ Accuspray™ ONE Replacement Spray Gun – (16579)","description":"The 3M™ Accuspray™ ONE Spray Gun delivers fundamental improvements in the application of auto paint and other fluids. A lightweight, 1-piece composite spray gun body contains no gaskets or seals, eliminating the need for maintenance kits. The gun accepts a range of Accuspray™ replaceable atomizing heads for a system affording the performance of a new gun, on demand and at a fraction of the cost. \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eEasy Cleanup. No Maintenance Kits. A Tremendous Range of Uses.\u003c\/strong\u003e\u003cbr\u003eWe asked: “If you could have the perfect spray gun, what would it be like?” The result was our 3M™ Accuspray™ ONE Spray Gun. It’s the only HVLP spray gun that allows for professional-grade application of paint, primer and other fluids with virtually no cleaning and no maintenance kits. This spray gun features a lightweight, composite body that is molded in one piece, eliminating the complexity, wear and cleaning of small parts and pieces like gaskets, seals and O-rings. Convenient, easily-operated controls for fan diameter, fluid and air pressure allow for quick adjustment across jobs from spot repairs to full panel coverage. In fact, this spray gun can handle jobs requiring up to 12” vertical or horizontal spray patterns with very little overspray – one gun for a complete range of applications. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eA Spray System That Pays Off\u003c\/strong\u003e\u003cbr\u003eOur Accuspray™ ONE Spray Gun is a central part of our 3M™ Accuspray™ System for automotive collision repair. It effortlessly accepts replaceable atomizing heads – transparent nozzles that can be reused 5-10 times and then simply removed and replaced. Replaceable atomizing heads are clear so it’s easy to see when the head is clean, and the spray guns perform like new every time the atomizing head is replaced – the equivalent of a new spray gun, at a fraction of the cost. The benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. The end result: cleaner, more productive, more profitable collision repair operations. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eAccuspray™ and Our PPS™ System\u003c\/strong\u003e\u003cbr\u003eThe 3M™ Paint Preparation System is an all-in-one closed system for mixing\/measuring, filtering, temporary storage and for spraying in any direction, including upside down, for consistent coverage and improved material usage. This system eliminates the inefficient process of mixing paint and other materials separately and transferring them through filters and other equipment where product gets left behind, unused. Instead, paint and other materials are mixed and sprayed out of the same cup with a PPS™ liner, lid and built-in filter. You simply place a disposable liner within a re-usable paint cup. Then mix the paint in the PPS™ liner, snap the disposable lid (with built-in filter) in place and attach the locking collar to complete the PPS™ System. With just a snap and quick quarter-turn, the assembly easily to the spray gun body. Once you’re finished spraying, simply remove the liner from the cup and discard it. It’s that simple. \u003cbr\u003e\n\u003cp\u003eThere’s no need to spend on the extra mixing cups, filters and strainers. And each PPS™ cup doubles as a temporary container for leftover material – just snap in the included sealing plug to help protect mixed paints, primers and sealants, and save even further on material costs. All of this adds up to a very clear cost savings across your operation. This system lets painters mix less paint, drastically reduce their solvent use, and spend less time cleaning spray guns and cups. All told, the PPS™ system can improve operator efficiency by as much as 15%, and can save up to 70% on solvent usage alone. \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Science of Better Spray Systems from 3M\u003c\/strong\u003e\u003cbr\u003eWe put decades of scientific and real-life study into our 3M™ Accuspray™ ONE Spray Gun to help make spray application easier and save collision repair and other professionals time and money at every step.  Every feature – from the lightweight composite spray gun body that eliminates maintenance kits to its easy-to-operate controls and varied spray patterns – is another example of what 3M does best: Science. Applied to Life.™ \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eONE System for Every Spraying Need\u003c\/strong\u003e\u003cbr\u003eThe 3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0 is the combination of convenience, versatility and efficiency. This system features the Accuspray™ ONE Spray Gun - a lightweight, composite spray gun body designed to eliminate the complexity of a traditional spray gun. This gun body has been engineered for enhanced durability in automotive and industrial environments. The spray gun uses a series of replaceable, see-through atomizing heads which can be reused 5-10 times and then simply removed and replaced. This affords the performance of a brand new spray gun, on demand and at a fraction of the price. \u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eReplaceable Atomizing Heads for the 3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0\u003c\/strong\u003e\u003cbr\u003eOur 3M™ Accuspray™ Atomizing Heads for PPS™ Series 2.0 deliver the ideal atomization to a wide range of fluids and coatings applied with Accuspray™ ONE Spray Guns. Atomizing heads are available in five sizes: 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue). For sealers, basecoats and topcoats, we recommend 1.3 mm or 1.4 mm atomizing heads. Choose the 1.8 mm size for higher-viscosity materials such as primer, and the 2.0 mm size for heavy-duty applications using fluids like gel coats, adhesives, undercoats or industrial coatings. Always refer to your paint company’s recommendations. Fast, easy controls for fan diameter, fluid and air pressure on the Accuspray™ ONE gun allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12” vertical or horizontal spray patterns. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlong with the distinctive color, the fluid tip size is presented clearly on each atomizing head for fast, accurate selection. Atomizing heads are see-through to make it easy for technicians to determine that the head is properly cleaned. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAll atomizing heads work with our PPS™ Series 2.0 Spray Cup System – a system of reusable paint cups and disposable lids and liners, so you can be done with cleaning paint cups forever. ONE gun – ONE system for a complete range of applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 3m™ Accuspray™ ONE Spray gun is for use with compressed air systems only\u003c\/li\u003e\n\u003cli\u003eAir Inlet - 1\/4” NPS (m)\u003c\/li\u003e\n\u003cli\u003eMaximum air inlet pressure is 24 psi (Maximum inlet pressure will yield approximately 10 psi (0.69 bar) at the air cap)\u003c\/li\u003e\n\u003cli\u003eRequired atomizing air volume is 13 cfm\u003c\/li\u003e\n\u003cli\u003eWeight – 11.2 oz\u003c\/li\u003e\n\u003cli\u003e5 to 8 spray outs before the head needs replacement\u003c\/li\u003e\n\u003cli\u003eFor best atomization results use 13 cfm @ 20 psi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e 16579, \u003cstrong\u003e3M Stock #\u003c\/strong\u003e 7100096183 (\u003cstrong\u003ePrevious 3M Stock #\u003c\/strong\u003e 60455080964), \u003cstrong\u003eUPC \u003c\/strong\u003e00051131165793\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3M™ Accuspray™ Gravity Spray Gun Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) - 3M™ Accuspray™ Spray Gun Body\u003c\/li\u003e\n\u003cli\u003e(1) - Air Flow Control Valve \u0026amp; Gauge\u003c\/li\u003e\n\u003cli\u003e(10) - Color Identification Clips (2 each of 5 colors)\u003c\/li\u003e\n\u003cli\u003e(1) - Quick start guide \u0026amp; owner’s manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eAtomizing heads and PPS liners and lids sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/3M_Accuspray_ONE_Spray_Gun_System_with_PPS_Series_2.0_Spray_Cup_System_26580_-_Owner_s_Manual.pdf?v=1708983166\" title=\"3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0 Spray Cup System - Owner's Manual\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003e3M™ Accuspray™ ONE Spray Gun System with PPS™ Series 2.0 Spray Cup System - Owner's Manual\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that the spray gun does not require a repair kit.  For more detailed information on the spray gun such as parts, setup \u0026amp; maintenance, please review the Owner’s Manual.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e3MTM HG and HGP Care and Cleaning Procedures\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDo not backpressure the gun.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThere are two Teflon O-rings or seals in the atomizing head. When you slide the atomizing head onto the needle the seals are pushed out towards the front of the gun. This seals the needle passage so the air and fluid going through the gun does not blow back into the gun body. If you back pressure the gun it will flip the Teflon seals so they point back into the gun. When you add fluid and pressure it sneaks past the seals and comes out in front of the handle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe solution is to clean the gun properly.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the atomizing head is on the gun, fill it half way with whatever cleaner is required for your coating. Cover and shake it a bit to loosen any residue. Pull the trigger and drain. Fill the atomizing head two more times with cleaner and drain through the tip by pulling the trigger. Pull the atomizing head straight off the gun. Do not twist as you're pulling. Fill the needle port on the back side of the atomizing head with cleaner and drain. Inspect to make sure there is no residue left in the atomizing head and repeat if needed.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":47892982300976,"sku":"X00005314","price":358.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/0884\/files\/16579.1.png?v=1710796311"}],"url":"https:\/\/www.finishsystems.com\/collections\/price-desc-water-base\/marine.oembed","provider":"Finish Systems","version":"1.0","type":"link"}