Specifications:

• The L100H HVLP Pressure Feed Spray Gun CAT Packs include two air caps (1090 – 6 cfm & 1094 - 13 cfm) along with several different needle and nozzle sizes (0.8 mm, 1.3 mm & 1.7 mm), multi-purpose wrench, needle packing wrench, cleaning brush and your choice of no cup (Smart Pack), for use with an existing 2 Qt. remote cup or pressure tank, an aluminum 1 Qt. pressure feed cup with regulator or the 3M PPS Cup System 850 ml pressure feed cup (liners and lids sold seperately) with regulator all contained in a handy carrying case.
• Nozzle sets ranging from 0.5 mm – 1.7 mm
• Air Inlet - 1/4” NPS (m)
• Fluid Inlet – 3/8” NPS (m)
• Weight – 20 oz.
• Required atomizing air pressure may vary as required by air cap (15 psi - 33 psi)
• Required atomizing air volume is 6 – 22.5 cfm dependent on the air cap
• The air volume requirement (CFM) is dependent on Air Cap (21-1090 Low CFM air cap requires 6 cfm @ 15 psi) 

 

Additional Features & Benefits:

• The L100H is a great spray gun option for anyone looking for a pressure feed HVLP spray gun that works well with smaller portable compressors for onsite finishing. (Low CFM air cap only requires 6 CFM at 15 psi).
• Optional feathering needle/nozzle sets are available to help prevent coating buildup on the fluid nozzle with certain coatings such as adhesives. (Available in 1.2 mm, 1.4 mm & 1.7 mm)

 

Information:

Lynx 100H (L100H) - Part Sheet

 

Please note that the repair kit for the L100H is part # 10-106.  For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet.

 

Have a question about this product?

Fill the form below and we will respond to you as soon as possible.