Specifications:
- Pressure Reduced (RP) air cap can only be used with the following fluid nozzle options (0.8 mm – 1.7 mm nozzle sets) – (1.9 mm & 2.2 mm nozzle sets can only be used with the HVLP air cap)
- 11 cfm air volume requirement @ 29 psi air pressure
- Air cap is anodized aluminum
- Green color denotes pressure reduced (RP) air cap
Information:
C.A. Technologies CPR – Part Sheet
C.A. Technologies CPR-G – Part Sheet
C.A. Technologies CPR-FE – Part Sheet
C.A. Technologies CPR-T3 – Part Sheet
C.A. Technologies H2O-CPR – Part Sheet
C.A. Technologies H2O-CPR-G – Part Sheet
Please note that the HVLP air cap (air nozzle) must coincide with the nozzle set that you are using based on the ranges listed above. For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet.
Spray gun models include:
- C.A. Technologies Model CPR, CPR-303R2, CPR-PPSR2 Pressure Feed CAT Packs
- C.A. Technologies Model CPR-G-A, CPR-G-W Automotive & Woodworking Gravity CAT Packs
- C.A. Technologies Model CPR-G-A-PPS, CPR-G-W-PPS Automotive & Woodworking Gravity CAT Packs - PPS
- C.A. Technologies Model EP-CPR-G-A, EP-CPR-G-W Automotive & Woodworking Gravity E-Packs
- C.A. Technologies Model EP-CPR-G-A-PPS, EP-CPR-G-W-PPS Automotive Gravity E-Packs - PPS
- C.A. Technologies Model CPR-FE, CPR-FE-303R2, CPR-FE-PPSR2 Pressure Feed CAT Packs
- C.A. Technologies Model CPR-T3 Techline Gravity CAT Packs
- C.A. Technologies Model H20-CPR, H20-CPR-303SS-R2, H20-CPR-PPS-R2 H2O Pressure Feed CAT Packs
- C.A. Technologies Model H20-CPR-G, H20-CPR-G-PPS H2O Gravity CAT Packs
