Specifications:

• The FE-LCFM HVLP Pressure Feed Spray Gun CAT Packs include two air caps (1090 – 6 cfm & 1094 - 13 cfm) along with several different needle and nozzle sizes (0.8 mm, 1.3 mm & 1.7 mm), multi-purpose wrench, ratchet wrench with 3/8" socket, cleaning brush and your choice of no cup (Smart Pack), for use with an existing 2 Qt. remote cup or pressure tank, an aluminum 1 Qt. pressure feed cup with regulator or the 3M PPS Cup System 1 Qt. pressure feed cup with regulator all contained in a handy carrying case.
• Nozzle sets ranging from 0.5 mm – 1.7 mm
• Air Inlet - 1/4” NPS (m)
• Fluid Inlet – 3/8” NPS (m)
• Weight – 15 oz.
• Required atomizing air pressure may vary as required by air cap (15 psi - 33 psi)
• Required atomizing air volume is 6 – 13 cfm dependent on the air cap
• The air volume requirement (CFM) is dependent on Air Cap (21-1090 Low CFM air cap requires 6 cfm @ 15 psi) 

 

Additional Features & Benefits:

• The FE-LCFM offers stainless steel wet parts however it does not have the stainless steel sleeve inside the aluminum gun head which is most desirable with any water-base stain, coating, or adhesive.

 

Information:

FE-Line LCFM (FE-LCFM) - Part Sheet

 

Please note that the repair kit for the FE-LCFM is part # 10-140.  For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).

Have a question about this product?

Fill the form below and we will respond to you as soon as possible.