C.A. Technologies Resin Casting 5 Gallon Pressure Tank

$1,059.00

The non-ASME, resin casting (mold) pressure tank from C.A. Technologies comes configured with a single air pressure regulator and No pickup tube. The pressure pot is available in 2.5, 5, 10, 15 and 20 gallon sizes and is constructed of a heavy gauge steel and has wheels for maneuverability or optional stationary feet.

Dimensions:

5 gallon tank (inside diameter is 12.5” and inside depth is 15.5”)

Specifications:

Top outlet tank

Single air pressure regulator

No pickup tube (pickup tube has been removed for casting applications)

Includes casters for the tank

Maximum pressure rating of 80 psi

¼” NPS male air inlet & outlet

3/8” NPS male fluid outlet

Safety relief valve

Vent valve

Flat bottom tank

Set-up Information: When installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.

*(Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593.)

5 Gallon Resin Casting Pressure Tank (51-507C) Part Sheet