Performance Series Resin Casting 20 Gallon Pressure Tank

$2,167.00

The Performance Series non-ASME, resin casting (mold) pressure tank comes configured with a single air pressure regulator and No pickup tube. The pressure pot is available in 2.5, 5, 10, 15 and 20 gallon sizes and is constructed of a heavy gauge steel and has wheels for maneuverability or optional stationary feet.

Dimensions:

20 gallon tank (inside diameter is 14.5” and inside depth is 25.5”)

This item is over-sized and does not qualify for free freight.

Specifications:

Top outlet tank

Single air pressure regulator

No pickup tube (pickup tube has been removed for casting applications)

Includes removable stainless steel tank liner

Includes casters for the tank

Maximum pressure rating of 80 psi

¼” NPS male air inlet & outlet

3/8” NPS male fluid outlet

Safety relief valve

Vent valve

Flat bottom tank

Quick disconnects and caps are included

Set-up Information - When installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.

*(Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593.)

Have a question about this product?

Fill the form below and we will respond to you as soon as possible.

Description
Related Products
Product Inquiry