C.A. Technologies H2O Air-Assist-Airless (AAA) 14:1 Bobcat Peak Performance Pump - Wall Model Set-up
C.A. Technologies H2O Air-Assist-Airless (AAA) 14:1 Bobcat Peak Performance Pump - Wall Model Set-up
$3,245.46
The C.A. Technologies H2O Air Assist Airless spray system is a stainless steel 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US. The H2O-B14 AAA pump system offers air assisted airless technology which combines airless and conventional or HVLP air atomization technologies to produce a very soft yet highly atomized spray pattern suitable for fine finish and high production work. The soft spray pattern has minimal over-spray and results in excellent material transfer efficiency. The H2O AAA units come standard with larger fluid passages and an Opti-tip to help reduce micro bubbling, one of the problems associated with spraying waterborne coatings. The H2O equipment is labeled “H2O” for this application so customers will not confuse the solvent based and water based units in their shops.
Description
Specifications:
- Pump Ratio - 14:1
- Max Air Pressure - 107 PSI
- Max Fluid Pressure - 1500 PSI
- Fluid Volume - 1/3 (0.33) GPM per cycle (supports one gun up to .024 orifice size)
- Air Volume Requirements – 6 cfm
- Pre-atomizing Fine Finish Opti-tip - 0.011" orifice size at 40° angle
- Gun Handle Filter - 100 mesh
- Fluid Hose - 3/16” I.D. x 25 ft
- Air Hose - ¼” I.D. x 25 ft
- Material Pick-Up Tube - ½” I.D. x 5 gallon length
Features & Benefits
- Pump offers a .33 GPM output for quick product changes with very little waste
- New 14:1 Peak Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity
- Simple direct acting valve is resistant to icing
- Long life carbon fiber cylinder and integrated noise suppression design for quiet operation
- Fluid section is all stainless featuring a non-contact pump tube that never wears out
- Cartridge style piston seal and guide for quick field replacement
- Large capacity solvent cup and 360 degree fluid inlet/outlet orientation
- Upper seal is a heavy duty V-Packing design for pre-cat lacquers, conversion varnish, polyurethanes and other harsh materials (This $154.75 packing upgrade is included in our pump packages)
- Lightweight Bobcat AAA-HVLP gun with .011" tip at 40° angle pre-atomizing opti-tip designed for water base finishes (other tip sizes available)
- 25 ft Air & Fluid Hose Set with 3/16” I.D. Fluid Hose & ¼” I.D. Air Hose to handle thicker water based materials
- Larger ½” I.D. material pick-up tube to offer less “turbulence” when spraying water based products (Flexible 5 gallon length with replaceable nylon inlet filter)
- Optional 55 gallon pick-up tube available for larger applications
- Optional hopper feed setup available for smaller applications
Spray System Includes:
- (1) – H2O Air-Assisted Airless 14:1 Wall Mount Pump
- (1) – H2O Bobcat Air-Assisted Airless Spray Gun with 411 Pre-Atomizing Fine Finish Opti-Tip
- (1) – 100 Mesh Gun Handle Filter
- (1) – ½” Material Pick-Up Tube
- (1) – 25 ft Air & Fluid Hose Set with 3/16” I.D. Fluid Hose & ¼” I.D. Air Hose
- (1) - Throat Seal Lubricant - 250 mL
Information:
C.A. Technologies H2O Air-Assist Airless 14:1 Bobcat Peak Performance Pump - Part Sheet
C.A. Technologies Air-Assist Airless – Training Videos
C.A. Technologies H2O Coating Solutions - Sales Sheet
C.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List
Please note that the H20 AAA outfits include a pre-atomizing fine finish opti-tip (36-XXX-F), 100 mesh gun handle filter, 1/2" material pick-up tube and larger 3/16" fluid hose to handle thicker water based materials. The maximum operational air pressure of this HVLP spray gun is 20 psi. For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual.
Related Products
Product Inquiry
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.
Specifications:
- Pump Ratio - 14:1
- Max Air Pressure - 107 PSI
- Max Fluid Pressure - 1500 PSI
- Fluid Volume - 1/3 (0.33) GPM per cycle (supports one gun up to .024 orifice size)
- Air Volume Requirements – 6 cfm
- Pre-atomizing Fine Finish Opti-tip - 0.011" orifice size at 40° angle
- Gun Handle Filter - 100 mesh
- Fluid Hose - 3/16” I.D. x 25 ft
- Air Hose - ¼” I.D. x 25 ft
- Material Pick-Up Tube - ½” I.D. x 5 gallon length
Features & Benefits
- Pump offers a .33 GPM output for quick product changes with very little waste
- New 14:1 Peak Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity
- Simple direct acting valve is resistant to icing
- Long life carbon fiber cylinder and integrated noise suppression design for quiet operation
- Fluid section is all stainless featuring a non-contact pump tube that never wears out
- Cartridge style piston seal and guide for quick field replacement
- Large capacity solvent cup and 360 degree fluid inlet/outlet orientation
- Upper seal is a heavy duty V-Packing design for pre-cat lacquers, conversion varnish, polyurethanes and other harsh materials (This $154.75 packing upgrade is included in our pump packages)
- Lightweight Bobcat AAA-HVLP gun with .011" tip at 40° angle pre-atomizing opti-tip designed for water base finishes (other tip sizes available)
- 25 ft Air & Fluid Hose Set with 3/16” I.D. Fluid Hose & ¼” I.D. Air Hose to handle thicker water based materials
- Larger ½” I.D. material pick-up tube to offer less “turbulence” when spraying water based products (Flexible 5 gallon length with replaceable nylon inlet filter)
- Optional 55 gallon pick-up tube available for larger applications
- Optional hopper feed setup available for smaller applications
Spray System Includes:
- (1) – H2O Air-Assisted Airless 14:1 Wall Mount Pump
- (1) – H2O Bobcat Air-Assisted Airless Spray Gun with 411 Pre-Atomizing Fine Finish Opti-Tip
- (1) – 100 Mesh Gun Handle Filter
- (1) – ½” Material Pick-Up Tube
- (1) – 25 ft Air & Fluid Hose Set with 3/16” I.D. Fluid Hose & ¼” I.D. Air Hose
- (1) - Throat Seal Lubricant - 250 mL
Information:
C.A. Technologies H2O Air-Assist Airless 14:1 Bobcat Peak Performance Pump - Part Sheet
C.A. Technologies Air-Assist Airless – Training Videos
C.A. Technologies H2O Coating Solutions - Sales Sheet
C.A. Technologies Air-Assist Airless Kremlin Tip - Conversion List
Please note that the H20 AAA outfits include a pre-atomizing fine finish opti-tip (36-XXX-F), 100 mesh gun handle filter, 1/2" material pick-up tube and larger 3/16" fluid hose to handle thicker water based materials. The maximum operational air pressure of this HVLP spray gun is 20 psi. For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual.
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.