In-Line Spray Gun Fluid Filter (3/8” - Low Pressure)

$36.00

The in-line spray gun fluid (paint) filter can be used on low pressure HVLP, RP and Conventional pressure feed spray guns as a final filter before the coating reaches the spray gun. The filter housing comes with a standard 100 mesh filter screen.

Do not use filter with Air Assist Airless (AAA) and Airless spray guns.

Specifications:

3/8” male thread X 3/8” female swivel fitting - (72-550)
Overall length 2” (inches)
Carbon steel
100 mesh (150 micron) filter screen included
Other in-line filter screen sizes sold separately

Available In-Line Filter Screens:

30 mesh (595 micron) – latex paint
60 mesh (250 micron) – standard for pigmented coatings
100 mesh (150 micron) – standard for clear coatings
200 mesh (74 micron) – optional for clear coatings

Please refer to alternate screen sizes above for different application needs. Replaces P/N W1754

Have a question about this product?

Fill the form below and we will respond to you as soon as possible.

Description
Related Products
Product Inquiry

Specifications:

3/8” male thread X 3/8” female swivel fitting - (72-550)
Overall length 2” (inches)
Carbon steel
100 mesh (150 micron) filter screen included
Other in-line filter screen sizes sold separately

Available In-Line Filter Screens:

30 mesh (595 micron) – latex paint
60 mesh (250 micron) – standard for pigmented coatings
100 mesh (150 micron) – standard for clear coatings
200 mesh (74 micron) – optional for clear coatings

Please refer to alternate screen sizes above for different application needs. Replaces P/N W1754

Have a question about this product?

Fill the form below and we will respond to you as soon as possible.